On 2015/9/14 16:17, Hannes Reinecke wrote:
> On 09/14/2015 05:08 AM, Jiang Liu wrote:
>> Previously the eata driver just grabs and accesses eata PCI devices
>> without implementing a PCI device driver, that causes troubles with
>> latest IRQ related
>>
>> Commit 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and
>> pcibios_free_irq()") changes the way to allocate PCI legacy IRQ
>> for PCI devices on x86 platforms. Instead of allocating PCI legacy
>> IRQs when pcibios_enable_device() gets called, now pcibios_alloc_irq()
>> will be called by pci_device_probe() to allocate PCI legacy IRQs
>> when binding PCI drivers to PCI devices.
>>
>> But the eata driver directly accesses PCI devices without implementing
>> corresponding PCI drivers, so pcibios_alloc_irq() won't be called for
>> those PCI devices and wrong IRQ number may be used to manage the PCI
>> device.
>>
>> This patch implements a PCI device driver to manage eata PCI devices,
>> so eata driver could properly cooperate with the PCI core. It also
>> provides headroom for PCI hotplug with eata driver.
>>
>> Signed-off-by: Jiang Liu <jiang.liu@xxxxxxxxxxxxxxx>
>> ---
>> drivers/scsi/eata.c | 170 ++++++++++++++++++++++-----------------------------
>> 1 file changed, 74 insertions(+), 96 deletions(-)
>>
>> diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
>> index b45d3b532b70..b92e6856f909 100644
>> --- a/drivers/scsi/eata.c
>> +++ b/drivers/scsi/eata.c
>> @@ -850,10 +850,6 @@ static unsigned long io_port[] = {
>> /* First ISA */
>> 0x1f0,
>>
>> - /* Space for MAX_PCI ports possibly reported by PCI_BIOS */
>> - SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP,
>> - SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP,
>> -
>> /* MAX_EISA ports */
>> 0x1c88, 0x2c88, 0x3c88, 0x4c88, 0x5c88, 0x6c88, 0x7c88, 0x8c88,
>> 0x9c88, 0xac88, 0xbc88, 0xcc88, 0xdc88, 0xec88, 0xfc88,
>> @@ -1024,60 +1020,13 @@ static int read_pio(unsigned long iobase, ushort * start, ushort * end)
>> return 0;
>> }
>>
>> -static struct pci_dev *get_pci_dev(unsigned long port_base)
>> -{
>> -#if defined(CONFIG_PCI)
>> - unsigned int addr;
>> - struct pci_dev *dev = NULL;
>> -
>> - while ((dev = pci_get_class(PCI_CLASS_STORAGE_SCSI << 8, dev))) {
>> - addr = pci_resource_start(dev, 0);
>> -
>> -#if defined(DEBUG_PCI_DETECT)
>> - printk("%s: get_pci_dev, bus %d, devfn 0x%x, addr 0x%x.\n",
>> - driver_name, dev->bus->number, dev->devfn, addr);
>> -#endif
>> -
>> - /* we are in so much trouble for a pci hotplug system with this driver
>> - * anyway, so doing this at least lets people unload the driver and not
>> - * cause memory problems, but in general this is a bad thing to do (this
>> - * driver needs to be converted to the proper PCI api someday... */
>> - pci_dev_put(dev);
>> - if (addr + PCI_BASE_ADDRESS_0 == port_base)
>> - return dev;
>> - }
>> -#endif /* end CONFIG_PCI */
>> - return NULL;
>> -}
>> -
>> -static void enable_pci_ports(void)
>> -{
>> -#if defined(CONFIG_PCI)
>> - struct pci_dev *dev = NULL;
>> -
>> - while ((dev = pci_get_class(PCI_CLASS_STORAGE_SCSI << 8, dev))) {
>> -#if defined(DEBUG_PCI_DETECT)
>> - printk("%s: enable_pci_ports, bus %d, devfn 0x%x.\n",
>> - driver_name, dev->bus->number, dev->devfn);
>> -#endif
>> -
>> - if (pci_enable_device(dev))
>> - printk
>> - ("%s: warning, pci_enable_device failed, bus %d devfn 0x%x.\n",
>> - driver_name, dev->bus->number, dev->devfn);
>> - }
>> -
>> -#endif /* end CONFIG_PCI */
>> -}
>> -
>> static int port_detect(unsigned long port_base, unsigned int j,
>> - struct scsi_host_template *tpnt)
>> + struct scsi_host_template *tpnt, struct pci_dev *pdev)
>> {
>> unsigned char irq, dma_channel, subversion, i, is_pci = 0;
>> unsigned char protocol_rev;
>> struct eata_info info;
>> char *bus_type, dma_name[16];
>> - struct pci_dev *pdev;
>> /* Allowed DMA channels for ISA (0 indicates reserved) */
>> unsigned char dma_channel_table[4] = { 5, 6, 7, 0 };
>> struct Scsi_Host *shost;
>> @@ -1199,15 +1148,8 @@ static int port_detect(unsigned long port_base, unsigned int j,
>> ("%s: warning, LEVEL triggering is suggested for IRQ %u.\n",
>> name, irq);
>>
>> - if (is_pci) {
>> - pdev = get_pci_dev(port_base);
>> - if (!pdev)
>> - printk
>> - ("%s: warning, failed to get pci_dev structure.\n",
>> - name);
>> - } else
>> - pdev = NULL;
>> -
>> + if (is_pci && !pdev)
>> + printk("%s: warning, failed to get pci_dev structure.\n", name);
>> if (pdev && (irq != pdev->irq)) {
>> printk("%s: IRQ %u mapped to IO-APIC IRQ %u.\n", name, irq,
>> pdev->irq);
>> @@ -1510,14 +1452,17 @@ static int option_setup(char *str)
>> }
>>
>> static unsigned int port_probe(unsigned long port_base,
>> - struct scsi_host_template *tpnt)
>> + struct scsi_host_template *tpnt,
>> + struct pci_dev *pdev)
>> {
>> int id;
>>
>> id = ida_simple_get(&eata_ida, 0, MAX_BOARDS, GFP_KERNEL);
>> if (id >= 0) {
>> set_bit(id, eata_board_bitmap);
>> - if (port_detect(port_base, id, tpnt))
>> + if (pdev)
>> + dev_set_drvdata(&pdev->dev, (void *)(long)id);
>> + if (port_detect(port_base, id, tpnt, pdev))
>> return id;
>> clear_bit(id, eata_board_bitmap);
>> ida_simple_remove(&eata_ida, id);
>> @@ -1526,42 +1471,81 @@ static unsigned int port_probe(unsigned long port_base,
>> return -1;
>> }
>>
>> -static void add_pci_ports(void)
>> -{
>> -#if defined(CONFIG_PCI)
>> - unsigned int addr, k;
>> - struct pci_dev *dev = NULL;
>> -
>> - for (k = 0; k < MAX_PCI; k++) {
>> +#ifdef CONFIG_PCI
>> +static int eata2x_pci_device_count;
>>
>> - if (!(dev = pci_get_class(PCI_CLASS_STORAGE_SCSI << 8, dev)))
>> - break;
>> +static int eata2x_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
>> +{
>> + int i, ret = -ENXIO;
>> + resource_size_t addr;
>> + unsigned long port_base;
>> + struct scsi_host_template *tpnt = (void *)id->driver_data;
>>
>> - if (pci_enable_device(dev)) {
>> + if (pci_enable_device(dev)) {
>> #if defined(DEBUG_PCI_DETECT)
>> - printk
>> - ("%s: detect, bus %d, devfn 0x%x, pci_enable_device failed.\n",
>> - driver_name, dev->bus->number, dev->devfn);
>> + pr_warn("%s: detect, bus %d, devfn 0x%x, pci_enable_device failed.\n",
>> + driver_name, dev->bus->number, dev->devfn);
>> #endif
>> + goto out_error;
>> + }
>>
>> - continue;
>> - }
>> -
>> - addr = pci_resource_start(dev, 0);
>> -
>> + addr = pci_resource_start(dev, 0);
>> + port_base = addr + PCI_BASE_ADDRESS_0;
>> #if defined(DEBUG_PCI_DETECT)
>> - printk("%s: detect, seq. %d, bus %d, devfn 0x%x, addr 0x%x.\n",
>> - driver_name, k, dev->bus->number, dev->devfn, addr);
>> + printk("%s: detect, bus %d, devfn 0x%x, addr 0x%x.\n",
>> + driver_name, dev->bus->number, dev->devfn, (unsigned int)addr);
>> #endif
>>
>> - /* Order addresses according to rev_scan value */
>> - io_port[MAX_INT_PARAM + (rev_scan ? (MAX_PCI - k) : (1 + k))] =
>> - addr + PCI_BASE_ADDRESS_0;
>> + if (setup_done) {
>> + /*
>> + * Handle kernel or module parameter
>> + * . probe board if its port is specified by user
>> + * . otherwise ignore the board
>> + */
>> + for (i = 1; i < MAX_INT_PARAM; i++)
>> + if (io_port[i] == port_base) {
>> + io_port[i] = SKIP;
>> + break;
>> + }
>> + if (i >= MAX_INT_PARAM)
>> + goto out_disable_device;
>> + }
> Hmm. I must admit I don't like the 'setup_done' thingie. As the driver
> is now converted to a 'real' PCI device we should be using driver-core
> mechanisms to avoid driver binding, not the prefabricated 'setup_done'
> variable.
> Can't we just do away with it completely?
Hi Hannes,
Thanks for review. Originally user may specify ports to probe
by kernel or module parameter, no matter it's a ISA, EISA or PCI device.
My concern here is that, if we don't do the setup_done dance here,
it may cause trouble if user load new eata driver with old parameter
configurations, so PCI eata device will be probed twice. So point here
is that we still honor user kernel or module parameter configurations.
Thanks!
Gerry
>
> Cheers,
>
> Hannes
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
