Forwarding without image attachment to get below message size limit of
the mailing lists.
I've uploaded the image to:
http://www.users.on.net/~arthur.marsh/20150907539.jpg
-------- Forwarded Message --------
Subject: Re: eata fails to load on post 4.2 kernels
Date: Mon, 07 Sep 2015 15:56:02 +0930
From: Arthur Marsh <arthur.marsh@xxxxxxxxxxxxxxxx>
To: Jiang Liu <jiang.liu@xxxxxxxxxxxxxxx>
CC: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>, tglx@xxxxxxxxxxxxx,
linux-scsi@xxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx
Jiang Liu wrote on 07/09/15 12:36:
On 2015/9/7 4:31, Arthur Marsh wrote:
Arthur Marsh wrote on 06/09/15 21:07:
Arthur Marsh wrote on 06/09/15 18:34:
Arthur Marsh wrote on 06/09/15 15:58:
Hi, I'm seeing the following on post 4.2 kernels, am currently
bisecting
to find where it started:
First kernel in the bisection that worked without needing irqpoll:
[ 73.751482] EATA0: IRQ 10 mapped to IO-APIC IRQ 17.
[ 73.776711] EATA/DMA 2.0x: Copyright (C) 1994-2003 Dario Ballabio.
[ 73.802005] EATA config options -> tm:1, lc:y, mq:16, rs:y, et:n,
ip:n, ep:n, pp:y.
[ 73.829175] EATA0: 2.0C, PCI 0xd890, IRQ 17, BMST, SG 122, MB 64.
[ 73.855552] EATA0: wide SCSI support enabled, max_id 16, max_lun 8.
[ 73.881125] EATA0: SCSI channel 0 enabled, host target ID 7.
After a git bisect, I get:
git bisect good
991de2e59090e55c65a7f59a049142e3c480f7bd is the first bad commit
commit 991de2e59090e55c65a7f59a049142e3c480f7bd
Author: Jiang Liu <jiang.liu@xxxxxxxxxxxxxxx>
Date: Wed Jun 10 16:54:59 2015 +0800
PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()
To support IOAPIC hotplug, we need to allocate PCI IRQ resources on
demand
and free them when not used anymore.
Implement pcibios_alloc_irq() and pcibios_free_irq() to dynamically
allocate and free PCI IRQs.
Remove mp_should_keep_irq(), which is no longer used.
[bhelgaas: changelog]
Signed-off-by: Jiang Liu <jiang.liu@xxxxxxxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Acked-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
:040000 040000 765e2d5232d53247ec260b34b51589c3bccb36ae
f680234a27685e94b1a35ae2a7218f8eafa9071a M arch
:040000 040000 d55a682bcde72682e883365e88ad1df6186fd54d
f82c470a04a6845fcf5e0aa934512c75628f798d M drivers
I'm happy to supply more details if needed.
Hi Arthur,
Thanks for reporting this. It seems to be an irq misrouting
issue. Could you please help to provide:
1) full dmesg with the latest code
2) full dmesg and /proc/interrupts with the latest code and
kernel parameter "irqpoll" specified
Thanks!
Gerry
The pc locks up when loading the eata module so I've attached a photo of
the monitor screen.
Arthur.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0+ (root@victoria) (gcc version 5.2.1 20150903 (Debian 5.2.1-16) ) #29 SMP PREEMPT Mon Sep 7 07:10:45 ACST 2015
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003ffb0000-0x000000003ffbdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003ffbe000-0x000000003ffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003ffe0000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/A8V-MX, BIOS 0503 12/06/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 00D0000000 mask FFF0000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x023fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x35c00000-0x35ffffff]
[ 0.000000] [mem 0x35c00000-0x35ffffff] page 4M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x35bfffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x35bfffff] page 4M
[ 0.000000] init_memory_mapping: [mem 0x36000000-0x377fdfff]
[ 0.000000] [mem 0x36000000-0x373fffff] page 4M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x02075000, 0x02075fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36152000-0x370a0fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FAC60 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x000000003FFB0100 00003C (v01 A M I OEMXSDT 12000506 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000003FFB0290 0000F4 (v03 A M I OEMFACP 12000506 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000003FFB03F0 0046F0 (v01 A0347 A0347001 00000001 INTL 02002026)
[ 0.000000] ACPI: FACS 0x000000003FFBE000 000040
[ 0.000000] ACPI: FACS 0x000000003FFBE000 000040
[ 0.000000] ACPI: APIC 0x000000003FFB0390 00005C (v01 A M I OEMAPIC 12000506 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000003FFBE040 000046 (v01 A M I AMI_OEM 12000506 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x02076000, 0x02076fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff]
[ 0.000000] HighMem [mem 0x00000000377fe000-0x000000003ffaffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ffaffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffaffff]
[ 0.000000] On node 0 totalpages: 261966
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1962 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 34738 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 18 pages/cpu @f5f06000 s41320 r0 d32408 u73728
[ 0.000000] pcpu-alloc: s41320 r0 d32408 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259968
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0+ root=UUID=96c96a61-8615-4715-86d0-09cb8c62638c ro single
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1004604K/1047864K available (5476K kernel code, 550K rwdata, 2080K rodata, 520K init, 8152K bss, 43260K reserved, 0K cma-reserved, 138952K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc17ee000 - 0xc1870000 ( 520 kB)
.data : 0xc155957a - 0xc17ecb00 (2637 kB)
.text : 0xc1000000 - 0xc155957a (5477 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Running RCU self tests
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
[ 0.000000] CPU 0 irqstacks, hard=f5816000 soft=f5818000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 4911 kB
[ 0.000000] per task-struct memory footprint: 1344 bytes
[ 0.000000] ------------------------
[ 0.000000] | Locking API testsuite:
[ 0.000000] ----------------------------------------------------------------------------
[ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] recursive read-lock: | ok | | ok |
[ 0.000000] recursive read-lock #2: | ok | | ok |
[ 0.000000] mixed read-write-lock: | ok | | ok |
[ 0.000000] mixed write-read-lock: | ok | | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] hard-irq read-recursion/123: ok |
[ 0.000000] soft-irq read-recursion/123: ok |
[ 0.000000] hard-irq read-recursion/132: ok |
[ 0.000000] soft-irq read-recursion/132: ok |
[ 0.000000] hard-irq read-recursion/213: ok |
[ 0.000000] soft-irq read-recursion/213: ok |
[ 0.000000] hard-irq read-recursion/231: ok |
[ 0.000000] soft-irq read-recursion/231: ok |
[ 0.000000] hard-irq read-recursion/312: ok |
[ 0.000000] soft-irq read-recursion/312: ok |
[ 0.000000] hard-irq read-recursion/321: ok |
[ 0.000000] soft-irq read-recursion/321: ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] | Wound/wait tests |
[ 0.000000] ---------------------
[ 0.000000] ww api failures: ok | ok | ok |
[ 0.000000] ww contexts mixing: ok | ok |
[ 0.000000] finishing ww context: ok | ok | ok | ok |
[ 0.000000] locking mismatches: ok | ok | ok |
[ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
[ 0.000000] spinlock nest unlocked: ok |
[ 0.000000] -----------------------------------------------------
[ 0.000000] |block | try |context|
[ 0.000000] -----------------------------------------------------
[ 0.000000] context: ok | ok | ok |
[ 0.000000] try: ok | ok | ok |
[ 0.000000] block: ok | ok | ok |
[ 0.000000] spinlock: ok | ok | ok |
[ 0.000000] -------------------------------------------------------
[ 0.000000] Good, all 253 testcases passed! |
[ 0.000000] ---------------------------------
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2000.131 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.008117] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.26 BogoMIPS (lpj=8000524)
[ 0.008233] pid_max: default: 32768 minimum: 301
[ 0.008342] ACPI: Core revision 20150818
[ 0.018815] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.019036] Security Framework initialized
[ 0.019095] AppArmor: AppArmor disabled by boot time parameter
[ 0.019153] Yama: becoming mindful.
[ 0.019277] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.019337] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020742] Initializing cgroup subsys blkio
[ 0.020831] Initializing cgroup subsys memory
[ 0.020911] Initializing cgroup subsys devices
[ 0.021000] Initializing cgroup subsys freezer
[ 0.021115] Initializing cgroup subsys net_cls
[ 0.021177] Initializing cgroup subsys perf_event
[ 0.021238] Initializing cgroup subsys net_prio
[ 0.021332] mce: CPU supports 5 MCE banks
[ 0.021423] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.021481] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.027270] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027949] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.064000] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 2f, stepping: 02)
[ 0.064000] Performance Events: AMD PMU driver.
[ 0.064000] ... version: 0
[ 0.064000] ... bit width: 48
[ 0.064000] ... generic registers: 4
[ 0.064000] ... value mask: 0000ffffffffffff
[ 0.064000] ... max period: 00007fffffffffff
[ 0.064000] ... fixed-purpose events: 0
[ 0.064000] ... event mask: 000000000000000f
[ 0.084063] x86: Booted up 1 node, 1 CPUs
[ 0.084124] smpboot: Total of 1 processors activated (4000.26 BogoMIPS)
[ 0.084889] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.089012] devtmpfs: initialized
[ 0.092175] PM: Registering ACPI NVS region [mem 0x3ffbe000-0x3ffdffff] (139264 bytes)
[ 0.092516] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.096120] pinctrl core: initialized pinctrl subsystem
[ 0.097193] NET: Registered protocol family 16
[ 0.108042] cpuidle: using governor ladder
[ 0.120018] cpuidle: using governor menu
[ 0.120081] node 0 link 0: io port [1000, ffffff]
[ 0.120085] TOM: 0000000040000000 aka 1024M
[ 0.120143] node 0 link 0: mmio [a0000, bffff]
[ 0.120148] node 0 link 0: mmio [40000000, ffffffff]
[ 0.120153] bus: [bus 00-ff] on node 0 link 0
[ 0.120155] bus: 00 [io 0x0000-0xffff]
[ 0.120158] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.120160] bus: 00 [mem 0x40000000-0xffffffff]
[ 0.120277] ACPI: bus type PCI registered
[ 0.120336] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.121261] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.121320] PCI: Using configuration type 1 for base access
[ 0.156184] ACPI: Added _OSI(Module Device)
[ 0.156245] ACPI: Added _OSI(Processor Device)
[ 0.156303] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.156360] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.164649] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.170974] ACPI: Interpreter enabled
[ 0.171053] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
[ 0.171210] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150818/hwxface-580)
[ 0.171420] ACPI: (supports S0 S1 S4 S5)
[ 0.171477] ACPI: Using IOAPIC for interrupt routing
[ 0.171624] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.196417] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.196488] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.196652] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.196913] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.196917] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.196921] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.196924] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored)
[ 0.196927] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff window] (ignored)
[ 0.196931] PCI: root bus 00: hardware-probed resources
[ 0.196996] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.198181] PCI host bridge to bus 0000:00
[ 0.198241] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.198300] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.198360] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.198420] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff]
[ 0.198571] pci 0000:00:00.0: [1106:0204] type 00 class 0x060000
[ 0.198604] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.199302] pci 0000:00:00.1: [1106:1204] type 00 class 0x060000
[ 0.199676] pci 0000:00:00.2: [1106:2204] type 00 class 0x060000
[ 0.200035] pci 0000:00:00.3: [1106:3204] type 00 class 0x060000
[ 0.200409] pci 0000:00:00.4: [1106:4204] type 00 class 0x060000
[ 0.200759] pci 0000:00:00.7: [1106:7204] type 00 class 0x060000
[ 0.201110] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400
[ 0.201180] pci 0000:00:01.0: supports D1
[ 0.201493] pci 0000:00:0f.0: [1106:0571] type 00 class 0x01018a
[ 0.201562] pci 0000:00:0f.0: reg 0x20: [io 0xfc00-0xfc0f]
[ 0.201590] pci 0000:00:0f.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.201651] pci 0000:00:0f.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.201711] pci 0000:00:0f.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.201772] pci 0000:00:0f.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.202127] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[ 0.202194] pci 0000:00:10.0: reg 0x20: [io 0xec00-0xec1f]
[ 0.202243] pci 0000:00:10.0: supports D1 D2
[ 0.202247] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.202531] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.202770] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[ 0.202837] pci 0000:00:10.1: reg 0x20: [io 0xe880-0xe89f]
[ 0.202887] pci 0000:00:10.1: supports D1 D2
[ 0.202890] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.203051] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.203291] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[ 0.203359] pci 0000:00:10.2: reg 0x20: [io 0xe800-0xe81f]
[ 0.203408] pci 0000:00:10.2: supports D1 D2
[ 0.203412] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.203572] pci 0000:00:10.2: System wakeup disabled by ACPI
[ 0.203811] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[ 0.203877] pci 0000:00:10.3: reg 0x20: [io 0xe480-0xe49f]
[ 0.203927] pci 0000:00:10.3: supports D1 D2
[ 0.203930] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.204102] pci 0000:00:10.3: System wakeup disabled by ACPI
[ 0.204345] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[ 0.204379] pci 0000:00:10.4: reg 0x10: [mem 0xff6ffc00-0xff6ffcff]
[ 0.204469] pci 0000:00:10.4: supports D1 D2
[ 0.204472] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.204634] pci 0000:00:10.4: System wakeup disabled by ACPI
[ 0.204878] pci 0000:00:11.0: [1106:3287] type 00 class 0x060100
[ 0.205301] pci 0000:00:11.7: [1106:287e] type 00 class 0x060000
[ 0.205662] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[ 0.205693] pci 0000:00:12.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.205706] pci 0000:00:12.0: reg 0x14: [mem 0xff6ff800-0xff6ff8ff]
[ 0.205785] pci 0000:00:12.0: supports D1 D2
[ 0.205788] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.205950] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.206193] pci 0000:00:13.0: [1106:287b] type 01 class 0x060400
[ 0.206518] pci 0000:00:13.1: [1106:287a] type 01 class 0x060400
[ 0.206721] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.206976] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.207282] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.207584] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.207883] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.208312] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.208374] pci 0000:00:01.0: bridge window [io 0xa000-0xcfff]
[ 0.208380] pci 0000:00:01.0: bridge window [mem 0xff400000-0xff4fffff]
[ 0.208386] pci 0000:00:01.0: bridge window [mem 0x7ff00000-0xbfefffff pref]
[ 0.208404] pci 0000:01:00.0: [1002:4153] type 00 class 0x030000
[ 0.208431] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff pref]
[ 0.208442] pci 0000:01:00.0: reg 0x14: [io 0xc000-0xc0ff]
[ 0.208452] pci 0000:01:00.0: reg 0x18: [mem 0xff4f0000-0xff4fffff]
[ 0.208484] pci 0000:01:00.0: reg 0x30: [mem 0xff4c0000-0xff4dffff pref]
[ 0.208518] pci 0000:01:00.0: supports D1 D2
[ 0.208678] pci 0000:01:00.1: [1002:4173] type 00 class 0x038000
[ 0.208700] pci 0000:01:00.1: reg 0x10: [mem 0x90000000-0x9fffffff pref]
[ 0.208710] pci 0000:01:00.1: reg 0x14: [mem 0xff4e0000-0xff4effff]
[ 0.208777] pci 0000:01:00.1: supports D1 D2
[ 0.209127] pci 0000:00:13.0: PCI bridge to [bus 02-04]
[ 0.209212] pci 0000:02:00.0: [1106:287c] type 01 class 0x060400
[ 0.209290] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.209354] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.209593] pci 0000:02:00.1: [1106:287d] type 01 class 0x060400
[ 0.209671] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 0.209899] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.210144] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.210340] pci 0000:02:00.1: PCI bridge to [bus 04]
[ 0.210540] pci 0000:00:13.1: PCI bridge to [bus 05]
[ 0.210601] pci 0000:00:13.1: bridge window [io 0xd000-0xdfff]
[ 0.210607] pci 0000:00:13.1: bridge window [mem 0xff500000-0xff5fffff]
[ 0.210649] pci 0000:05:0b.0: [1102:0004] type 00 class 0x040100
[ 0.210678] pci 0000:05:0b.0: reg 0x10: [io 0xd800-0xd83f]
[ 0.210770] pci 0000:05:0b.0: supports D1 D2
[ 0.210929] pci 0000:05:0b.1: [1102:7003] type 00 class 0x098000
[ 0.210956] pci 0000:05:0b.1: reg 0x10: [io 0xdc00-0xdc07]
[ 0.211047] pci 0000:05:0b.1: supports D1 D2
[ 0.211207] pci 0000:05:0b.2: [1102:4001] type 00 class 0x0c0010
[ 0.211238] pci 0000:05:0b.2: reg 0x10: [mem 0xff5ef800-0xff5effff]
[ 0.211251] pci 0000:05:0b.2: reg 0x14: [mem 0xff5e8000-0xff5ebfff]
[ 0.211338] pci 0000:05:0b.2: supports D1 D2
[ 0.211341] pci 0000:05:0b.2: PME# supported from D0 D1 D2 D3hot
[ 0.211541] pci 0000:05:0c.0: [1044:a400] type 00 class 0x010000
[ 0.211562] pci 0000:05:0c.0: reg 0x10: [io 0xd880-0xd89f]
[ 0.211624] pci 0000:05:0c.0: reg 0x30: [mem 0xff5f0000-0xff5f7fff pref]
[ 0.211838] pci_bus 0000:00: on NUMA node 0
[ 0.214581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.215322] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.216048] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.216761] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.217476] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.218284] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.219093] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.219901] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.221551] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.221612] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.221688] vgaarb: loaded
[ 0.221743] vgaarb: bridge control possible 0000:01:00.0
[ 0.224044] PCI: Using ACPI for IRQ routing
[ 0.224105] PCI: pci_cache_line_size set to 64 bytes
[ 0.224210] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.224222] e820: reserve RAM buffer [mem 0x3ffb0000-0x3fffffff]
[ 0.225539] clocksource: Switched to clocksource refined-jiffies
[ 0.245684] pnp: PnP ACPI init
[ 0.246091] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.247338] pnp 00:01: [dma 3]
[ 0.247684] pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.248035] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.248179] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.248604] system 00:03: [io 0x03e0-0x03e7] has been reserved
[ 0.248666] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.248727] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.248787] system 00:03: [io 0x0400-0x041f] has been reserved
[ 0.248849] system 00:03: [mem 0xff780000-0xffffffff] has been reserved
[ 0.248910] system 00:03: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.248975] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.249258] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.249321] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.249386] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.249572] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.249802] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.250422] pnp 00:07: [dma 0 disabled]
[ 0.250600] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.250816] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.250882] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251515] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.251579] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.251641] system 00:09: [mem 0x00100000-0x3fffffff] could not be reserved
[ 0.251706] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.252075] pnp: PnP ACPI: found 10 devices
[ 0.294783] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.294886] clocksource: Switched to clocksource acpi_pm
[ 0.294985] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.295046] pci 0000:00:01.0: bridge window [io 0xa000-0xcfff]
[ 0.295110] pci 0000:00:01.0: bridge window [mem 0xff400000-0xff4fffff]
[ 0.295110] pci 0000:00:01.0: bridge window [mem 0x7ff00000-0xbfefffff pref]
[ 0.295110] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.295110] pci 0000:02:00.1: PCI bridge to [bus 04]
[ 0.295110] pci 0000:00:13.0: PCI bridge to [bus 02-04]
[ 0.295110] pci 0000:00:13.1: PCI bridge to [bus 05]
[ 0.295110] pci 0000:00:13.1: bridge window [io 0xd000-0xdfff]
[ 0.295110] pci 0000:00:13.1: bridge window [mem 0xff500000-0xff5fffff]
[ 0.295110] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.295110] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.295110] pci_bus 0000:00: resource 6 [mem 0x40000000-0xffffffff]
[ 0.295110] pci_bus 0000:01: resource 0 [io 0xa000-0xcfff]
[ 0.295110] pci_bus 0000:01: resource 1 [mem 0xff400000-0xff4fffff]
[ 0.295110] pci_bus 0000:01: resource 2 [mem 0x7ff00000-0xbfefffff pref]
[ 0.295110] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.295110] pci_bus 0000:05: resource 1 [mem 0xff500000-0xff5fffff]
[ 0.295110] NET: Registered protocol family 2
[ 0.295110] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.295110] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.295639] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.295816] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.295955] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.296350] NET: Registered protocol family 1
[ 0.296447] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.296529] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.296758] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.296784] PCI: CLS 64 bytes, default 64
[ 0.297139] Unpacking initramfs...
[ 0.797009] Freeing initrd memory: 15676K (f6152000 - f70a1000)
[ 0.797217] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd4a9e1deb, max_idle_ns: 440795254256 ns
[ 0.797362] microcode: AMD CPU family 0xf not supported
[ 0.798543] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.798703] audit: initializing netlink subsys (disabled)
[ 0.798872] audit: type=2000 audit(1441606077.795:1): initialized
[ 0.799877] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.800391] VFS: Disk quotas dquot_6.6.0
[ 0.800481] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.803296] bounce: pool size: 64 pages
[ 0.803388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.807646] io scheduler noop registered
[ 0.807705] io scheduler deadline registered
[ 0.807786] io scheduler cfq registered (default)
[ 0.808445] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.808528] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.808711] GHES: HEST is not enabled!
[ 0.808933] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.829832] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.831668] Linux agpgart interface v0.103
[ 0.831762] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
[ 0.838896] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.839781] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.840573] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.841194] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.841826] mousedev: PS/2 mouse device common for all mice
[ 0.842313] rtc_cmos 00:00: RTC can wake from S4
[ 0.842845] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.842944] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
[ 0.843414] NET: Registered protocol family 10
[ 0.848435] mip6: Mobile IPv6
[ 0.848525] NET: Registered protocol family 17
[ 0.848593] mpls_gso: MPLS GSO support
[ 0.849132] Using IPI No-Shortcut mode
[ 0.849745] registered taskstats version 1
[ 0.859345] rtc_cmos 00:00: setting system clock to 2015-09-07 06:07:58 UTC (1441606078)
[ 0.859698] PM: Hibernation image not present or could not be loaded.
[ 0.860754] Freeing unused kernel memory: 520K (c17ee000 - c1870000)
[ 0.860936] Write protecting the kernel text: 5480k
[ 0.861152] Write protecting the kernel read-only data: 2084k
[ 0.864816] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.953937] random: systemd-udevd urandom read with 0 bits of entropy available
[ 1.101817] SCSI subsystem initialized
[ 1.119147] ACPI: bus type USB registered
[ 1.119328] usbcore: registered new interface driver usbfs
[ 1.119522] usbcore: registered new interface driver hub
[ 1.120856] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 1.122434] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1e000, 00:13:d4:cc:9b:57, IRQ 23
[ 1.123280] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1
[ 1.129417] usbcore: registered new device driver usb
[ 1.130447] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.130861] ehci-pci: EHCI PCI platform driver
[ 1.131832] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.135549] ehci-pci 0000:00:10.4: EHCI Host Controller
[ 1.135999] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 1.137721] ehci-pci 0000:00:10.4: debug port 1
[ 1.138014] ehci-pci 0000:00:10.4: irq 22, io mem 0xff6ffc00
[ 1.139763] libata version 3.00 loaded.
[ 1.148120] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 1.149264] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.149327] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.149398] usb usb1: Product: EHCI Host Controller
[ 1.149455] usb usb1: Manufacturer: Linux 4.2.0+ ehci_hcd
[ 1.149513] usb usb1: SerialNumber: 0000:00:10.4
[ 1.151307] hub 1-0:1.0: USB hub found
[ 1.152477] hub 1-0:1.0: 8 ports detected
[ 1.162404] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.162500] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.162580] uhci_hcd 0000:00:10.0: detected 2 ports
[ 1.162686] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000ec00
[ 1.163034] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.163095] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.163166] usb usb2: Product: UHCI Host Controller
[ 1.163223] usb usb2: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.163282] usb usb2: SerialNumber: 0000:00:10.0
[ 1.163905] hub 2-0:1.0: USB hub found
[ 1.163987] hub 2-0:1.0: 2 ports detected
[ 1.164782] pata_via 0000:00:0f.0: version 0.3.4
[ 1.172705] scsi host0: pata_via
[ 1.178602] scsi host1: pata_via
[ 1.178909] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.178970] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.179937] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.180126] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.180210] uhci_hcd 0000:00:10.1: detected 2 ports
[ 1.180293] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e880
[ 1.180522] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.180583] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.180654] usb usb3: Product: UHCI Host Controller
[ 1.180711] usb usb3: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.180769] usb usb3: SerialNumber: 0000:00:10.1
[ 1.181390] hub 3-0:1.0: USB hub found
[ 1.181470] hub 3-0:1.0: 2 ports detected
[ 1.182250] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.182323] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.182401] uhci_hcd 0000:00:10.2: detected 2 ports
[ 1.182502] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
[ 1.183194] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.183256] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.183327] usb usb4: Product: UHCI Host Controller
[ 1.183384] usb usb4: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.183442] usb usb4: SerialNumber: 0000:00:10.2
[ 1.185338] hub 4-0:1.0: USB hub found
[ 1.185935] hub 4-0:1.0: 2 ports detected
[ 1.188759] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 1.188838] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 1.188917] uhci_hcd 0000:00:10.3: detected 2 ports
[ 1.189023] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000e480
[ 1.191742] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.191808] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.191879] usb usb5: Product: UHCI Host Controller
[ 1.191936] usb usb5: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.191994] usb usb5: SerialNumber: 0000:00:10.3
[ 1.192433] firewire_ohci 0000:05:0b.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.195716] hub 5-0:1.0: USB hub found
[ 1.196493] hub 5-0:1.0: 2 ports detected
[ 1.353461] ata1.00: ATA-8: WDC WD3200AAJB-00WGA0, 00.02C01, max UDMA/100
[ 1.353528] ata1.00: 625142448 sectors, multi 16: LBA48
[ 1.360693] ata1.00: configured for UDMA/100
[ 1.366180] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAJB-0 2C01 PQ: 0 ANSI: 5
[ 1.468048] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 1.540360] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A103, max UDMA/33
[ 1.540801] ata2.01: HPA detected: current 66055248, native 78242976
[ 1.540861] ata2.01: ATA-6: SAMSUNG SP4002H, QU100-57, max UDMA/100
[ 1.540921] ata2.01: 66055248 sectors, multi 16: LBA
[ 1.540983] ata2.01: limited to UDMA/33 due to 40-wire cable
[ 1.556227] ata2.00: configured for UDMA/33
[ 1.572621] ata2.01: configured for UDMA/33
[ 1.596085] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
[ 1.610163] usb 1-5: New USB device found, idVendor=13fe, idProduct=1e23
[ 1.610228] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.610290] usb 1-5: Product: STORE N GO
[ 1.610346] usb 1-5: Manufacturer: Verbatim
[ 1.610403] usb 1-5: SerialNumber: 078A18B40293
[ 1.612059] scsi 1:0:1:0: Direct-Access ATA SAMSUNG SP4002H 0-57 PQ: 0 ANSI: 5
[ 1.621633] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.621870] sd 0:0:0:0: [sda] Write Protect is off
[ 1.621931] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.621999] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.625073] sd 1:0:1:0: [sdb] 66055248 512-byte logical blocks: (33.8 GB/31.4 GiB)
[ 1.625306] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.625366] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.625434] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.644479] uas: Unknown symbol usb_stor_adjust_quirks (err 0)
[ 1.644595] uas: Unknown symbol usb_stor_sense_invalidCDB (err 0)
[ 1.658638] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.658717] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.660647] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.662318] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 1.664814] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.681029] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sdb3
[ 1.681524] sdb: p3 size 13333950 extends beyond EOD, enabling native capacity
[ 1.683155] ata2: soft resetting link
[ 1.693039] firewire_core 0000:05:0b.2: created device fw0: GUID 00023c0153000612, S400
[ 1.852365] ata2.01: n_sectors mismatch 66055248 != 78242976
[ 1.852429] ata2.01: new n_sectors matches native, probably late HPA unlock, n_sectors updated
[ 1.876237] ata2.00: configured for UDMA/33
[ 1.892634] ata2.01: configured for UDMA/33
[ 1.894835] ata2: EH complete
[ 1.905963] sd 1:0:1:0: [sdb] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
[ 1.918092] sdb: detected capacity change from 33820286976 to 40060403712
[ 1.989814] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sdb3
[ 1.993592] sdb: detected capacity change from 0 to 40060403712
[ 1.993969] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 2.790065] random: nonblocking pool is initialized
[ 4.144472] floppy0: no floppy controllers found
[ 4.175402] PM: Starting manual resume from disk
[ 4.175487] PM: Hibernation image partition 8:5 present
[ 4.175490] PM: Looking for hibernation image.
[ 4.176370] PM: Image not found (code -22)
[ 4.176374] PM: Hibernation image not present or could not be loaded.
[ 4.183875] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 4.183882] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 4.183886] PM: Basic memory bitmaps created
[ 4.184651] PM: Basic memory bitmaps freed
[ 5.327921] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem
[ 5.354148] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 9.628573] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 9.628660] ACPI: Sleep Button [SLPB]
[ 9.629061] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 9.629136] ACPI: Power Button [PWRB]
[ 9.629395] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.629469] ACPI: Power Button [PWRF]
[ 9.799583] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.899927] parport_pc 00:01: reported by Plug and Play ACPI
[ 9.901635] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 9.903768] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.903976] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.904304] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 10.314531] gameport gameport0: EMU10K1 is pci0000:05:0b.1/gameport0, io 0xdc00, speed 1209kHz
[ 10.884508] EDAC MC: Ver: 3.0.0
[ 10.916241] MCE: In-kernel MCE decoding enabled.
[ 10.949284] AMD64 EDAC driver v3.4.0
[ 10.949413] EDAC amd64: DRAM ECC enabled.
[ 10.949472] EDAC amd64: K8 revE or earlier detected (node 0).
[ 10.950828] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 10.951258] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 10.951333] EDAC amd64: amd64_edac on 32-bit is unsupported. USE AT YOUR OWN RISK!
[ 11.029289] [drm] Initialized drm 1.1.0 20060810
[ 11.033973] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 11.175461] Error: Driver 'pcspkr' is already registered, aborting...
[ 11.511350] powernow_k8: fid 0xc (2000 MHz), vid 0x6
[ 11.511414] powernow_k8: fid 0xa (1800 MHz), vid 0x8
[ 11.511472] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[ 11.512802] powernow_k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
[ 11.938963] ppdev: user-space parallel port driver
[ 12.222070] snd_emu10k1 0000:05:0b.0: Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
[ 12.345290] [drm] radeon kernel modesetting enabled.
[ 12.368418] [drm] initializing kernel modesetting (RV350 0x1002:0x4153 0x1458:0x4050).
[ 12.368560] [drm] register mmio base: 0xFF4F0000
[ 12.368617] [drm] register mmio size: 65536
[ 12.373626] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 12.373717] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 12.374677] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[ 12.374780] radeon 0000:01:00.0: GTT: 256M 0xD0000000 - 0xDFFFFFFF
[ 12.374842] [drm] Generation 2 PCI interface, using max accessible memory
[ 12.374904] radeon 0000:01:00.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used)
[ 12.375033] [drm] Detected VRAM RAM=256M, BAR=256M
[ 12.378052] [drm] RAM width 128bits DDR
[ 12.384378] [TTM] Zone kernel: Available graphics memory: 440924 kiB
[ 12.384445] [TTM] Zone highmem: Available graphics memory: 510400 kiB
[ 12.384504] [TTM] Initializing pool allocator
[ 12.384611] [TTM] Initializing DMA pool allocator
[ 12.385865] [drm] radeon: 256M of VRAM memory ready
[ 12.385926] [drm] radeon: 256M of GTT memory ready.
[ 12.386167] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 12.412230] radeon 0000:01:00.0: WB disabled
[ 12.412469] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xf8022000
[ 12.412550] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.412715] [drm] Driver supports precise vblank timestamp query.
[ 12.413263] [drm] radeon: irq initialized.
[ 12.413512] [drm] Loading R300 Microcode
[ 12.481117] [drm] radeon: ring at 0x00000000D0001000
[ 12.481329] [drm] ring test succeeded in 0 usecs
[ 12.482135] [drm] ib test succeeded in 0 usecs
[ 12.497774] [drm] Radeon Display Connectors
[ 12.497837] [drm] Connector 0:
[ 12.497892] [drm] VGA-1
[ 12.497948] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 12.498006] [drm] Encoders:
[ 12.498060] [drm] CRT1: INTERNAL_DAC1
[ 12.498117] [drm] Connector 1:
[ 12.498172] [drm] DVI-I-1
[ 12.498226] [drm] HPD1
[ 12.498280] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 12.498338] [drm] Encoders:
[ 12.498392] [drm] CRT2: INTERNAL_DAC2
[ 12.498447] [drm] DFP1: INTERNAL_TMDS1
[ 12.498503] [drm] Connector 2:
[ 12.498557] [drm] SVIDEO-1
[ 12.498611] [drm] Encoders:
[ 12.498665] [drm] TV1: INTERNAL_DAC2
[ 12.547688] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 12.552142] scsi host2: usb-storage 1-5:1.0
[ 12.553109] usbcore: registered new interface driver usb-storage
[ 12.608232] usbcore: registered new interface driver uas
[ 12.888672] floppy0: no floppy controllers found
[ 12.951298] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 12.982549] [drm] fb mappable at 0xA0040000
[ 12.982612] [drm] vram apper at 0xA0000000
[ 12.982669] [drm] size 8294400
[ 12.982723] [drm] fb depth is 24
[ 12.982778] [drm] pitch is 7680
[ 12.988756] fbcon: radeondrmfb (fb0) is primary device
[ 13.212056] Console: switching to colour frame buffer device 240x67
[ 13.398700] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 13.408070] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 13.560481] scsi 2:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
[ 13.574447] sd 2:0:0:0: [sdc] 3911680 512-byte logical blocks: (2.00 GB/1.86 GiB)
[ 13.575810] sd 2:0:0:0: [sdc] Write Protect is off
[ 13.576334] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 13.577063] sd 2:0:0:0: [sdc] No Caching mode page found
[ 13.577550] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 13.580471] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 13.726747] sdc: sdc1
[ 13.730429] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 15.281194] ata1.00: configured for UDMA/100
[ 15.281581] ata1: EH complete
[ 15.352301] ata2.00: configured for UDMA/33
[ 15.360440] ata2.01: configured for UDMA/33
[ 15.360827] ata2: EH complete
[ 16.468441] Adding 2200868k swap on /dev/sda5. Priority:-1 extents:1 across:2200868k
[ 16.571690] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 17.046000] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,data=ordered
[ 18.087475] lp0: using parport0 (interrupt-driven).
[ 18.250095] Loading iSCSI transport class v2.0-870.
[ 18.316699] iscsi: registered transport (tcp)
[ 18.515619] iscsi: registered transport (iser)
[ 18.636136] fuse init (API version 7.23)
[ 18.845865] tun: Universal TUN/TAP device driver, 1.6
[ 18.874609] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 18.952150] w83627ehf: Found W83627EHG chip at 0x290
[ 18.983526] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB_.PCI0.SBRG.SIOR.HWRE) (20150818/utaddress-254)
[ 19.012043] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 50.964536] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 51.023170] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 51.107301] FAT-fs (sda6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 51.196786] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0+ (root@victoria) (gcc version 5.2.1 20150903 (Debian 5.2.1-16) ) #29 SMP PREEMPT Mon Sep 7 07:10:45 ACST 2015
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003ffb0000-0x000000003ffbdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003ffbe000-0x000000003ffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003ffe0000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/A8V-MX, BIOS 0503 12/06/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 00D0000000 mask FFF0000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x023fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x35c00000-0x35ffffff]
[ 0.000000] [mem 0x35c00000-0x35ffffff] page 4M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x35bfffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x35bfffff] page 4M
[ 0.000000] init_memory_mapping: [mem 0x36000000-0x377fdfff]
[ 0.000000] [mem 0x36000000-0x373fffff] page 4M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x02075000, 0x02075fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36152000-0x370a0fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FAC60 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x000000003FFB0100 00003C (v01 A M I OEMXSDT 12000506 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000003FFB0290 0000F4 (v03 A M I OEMFACP 12000506 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000003FFB03F0 0046F0 (v01 A0347 A0347001 00000001 INTL 02002026)
[ 0.000000] ACPI: FACS 0x000000003FFBE000 000040
[ 0.000000] ACPI: FACS 0x000000003FFBE000 000040
[ 0.000000] ACPI: APIC 0x000000003FFB0390 00005C (v01 A M I OEMAPIC 12000506 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000003FFBE040 000046 (v01 A M I AMI_OEM 12000506 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x02076000, 0x02076fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff]
[ 0.000000] HighMem [mem 0x00000000377fe000-0x000000003ffaffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ffaffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffaffff]
[ 0.000000] On node 0 totalpages: 261966
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1962 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 34738 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 18 pages/cpu @f5f06000 s41320 r0 d32408 u73728
[ 0.000000] pcpu-alloc: s41320 r0 d32408 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259968
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0+ root=UUID=96c96a61-8615-4715-86d0-09cb8c62638c ro single irqpoll
[ 0.000000] Misrouted IRQ fixup and polling support enabled
[ 0.000000] This may significantly impact system performance
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1004604K/1047864K available (5476K kernel code, 550K rwdata, 2080K rodata, 520K init, 8152K bss, 43260K reserved, 0K cma-reserved, 138952K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc17ee000 - 0xc1870000 ( 520 kB)
.data : 0xc155957a - 0xc17ecb00 (2637 kB)
.text : 0xc1000000 - 0xc155957a (5477 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Running RCU self tests
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
[ 0.000000] CPU 0 irqstacks, hard=f5816000 soft=f5818000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 4911 kB
[ 0.000000] per task-struct memory footprint: 1344 bytes
[ 0.000000] ------------------------
[ 0.000000] | Locking API testsuite:
[ 0.000000] ----------------------------------------------------------------------------
[ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] recursive read-lock: | ok | | ok |
[ 0.000000] recursive read-lock #2: | ok | | ok |
[ 0.000000] mixed read-write-lock: | ok | | ok |
[ 0.000000] mixed write-read-lock: | ok | | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] hard-irq read-recursion/123: ok |
[ 0.000000] soft-irq read-recursion/123: ok |
[ 0.000000] hard-irq read-recursion/132: ok |
[ 0.000000] soft-irq read-recursion/132: ok |
[ 0.000000] hard-irq read-recursion/213: ok |
[ 0.000000] soft-irq read-recursion/213: ok |
[ 0.000000] hard-irq read-recursion/231: ok |
[ 0.000000] soft-irq read-recursion/231: ok |
[ 0.000000] hard-irq read-recursion/312: ok |
[ 0.000000] soft-irq read-recursion/312: ok |
[ 0.000000] hard-irq read-recursion/321: ok |
[ 0.000000] soft-irq read-recursion/321: ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] | Wound/wait tests |
[ 0.000000] ---------------------
[ 0.000000] ww api failures: ok | ok | ok |
[ 0.000000] ww contexts mixing: ok | ok |
[ 0.000000] finishing ww context: ok | ok | ok | ok |
[ 0.000000] locking mismatches: ok | ok | ok |
[ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
[ 0.000000] spinlock nest unlocked: ok |
[ 0.000000] -----------------------------------------------------
[ 0.000000] |block | try |context|
[ 0.000000] -----------------------------------------------------
[ 0.000000] context: ok | ok | ok |
[ 0.000000] try: ok | ok | ok |
[ 0.000000] block: ok | ok | ok |
[ 0.000000] spinlock: ok | ok | ok |
[ 0.000000] -------------------------------------------------------
[ 0.000000] Good, all 253 testcases passed! |
[ 0.000000] ---------------------------------
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2000.015 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.008117] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.03 BogoMIPS (lpj=8000060)
[ 0.008233] pid_max: default: 32768 minimum: 301
[ 0.008341] ACPI: Core revision 20150818
[ 0.018220] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.018441] Security Framework initialized
[ 0.018500] AppArmor: AppArmor disabled by boot time parameter
[ 0.018558] Yama: becoming mindful.
[ 0.018681] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.018743] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020157] Initializing cgroup subsys blkio
[ 0.020247] Initializing cgroup subsys memory
[ 0.020326] Initializing cgroup subsys devices
[ 0.020415] Initializing cgroup subsys freezer
[ 0.020529] Initializing cgroup subsys net_cls
[ 0.020591] Initializing cgroup subsys perf_event
[ 0.020653] Initializing cgroup subsys net_prio
[ 0.020747] mce: CPU supports 5 MCE banks
[ 0.020838] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.020896] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.026696] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027373] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.068000] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 2f, stepping: 02)
[ 0.068000] Performance Events: AMD PMU driver.
[ 0.068000] ... version: 0
[ 0.068000] ... bit width: 48
[ 0.068000] ... generic registers: 4
[ 0.068000] ... value mask: 0000ffffffffffff
[ 0.068000] ... max period: 00007fffffffffff
[ 0.068000] ... fixed-purpose events: 0
[ 0.068000] ... event mask: 000000000000000f
[ 0.088063] x86: Booted up 1 node, 1 CPUs
[ 0.088124] smpboot: Total of 1 processors activated (4000.03 BogoMIPS)
[ 0.088892] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.093012] devtmpfs: initialized
[ 0.096178] PM: Registering ACPI NVS region [mem 0x3ffbe000-0x3ffdffff] (139264 bytes)
[ 0.096519] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.100120] pinctrl core: initialized pinctrl subsystem
[ 0.101192] NET: Registered protocol family 16
[ 0.112041] cpuidle: using governor ladder
[ 0.124018] cpuidle: using governor menu
[ 0.124081] node 0 link 0: io port [1000, ffffff]
[ 0.124085] TOM: 0000000040000000 aka 1024M
[ 0.124144] node 0 link 0: mmio [a0000, bffff]
[ 0.124149] node 0 link 0: mmio [40000000, ffffffff]
[ 0.124153] bus: [bus 00-ff] on node 0 link 0
[ 0.124155] bus: 00 [io 0x0000-0xffff]
[ 0.124158] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.124160] bus: 00 [mem 0x40000000-0xffffffff]
[ 0.124282] ACPI: bus type PCI registered
[ 0.124340] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.125266] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.125325] PCI: Using configuration type 1 for base access
[ 0.160184] ACPI: Added _OSI(Module Device)
[ 0.160244] ACPI: Added _OSI(Processor Device)
[ 0.160302] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.160359] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.168647] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.174970] ACPI: Interpreter enabled
[ 0.175048] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
[ 0.175205] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150818/hwxface-580)
[ 0.175416] ACPI: (supports S0 S1 S4 S5)
[ 0.175473] ACPI: Using IOAPIC for interrupt routing
[ 0.175620] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.200389] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.200460] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.200625] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.200886] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.200890] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.200893] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.200896] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored)
[ 0.200900] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff window] (ignored)
[ 0.200903] PCI: root bus 00: hardware-probed resources
[ 0.200968] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.202154] PCI host bridge to bus 0000:00
[ 0.202213] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.202273] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.202332] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.202393] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff]
[ 0.202544] pci 0000:00:00.0: [1106:0204] type 00 class 0x060000
[ 0.202577] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.203273] pci 0000:00:00.1: [1106:1204] type 00 class 0x060000
[ 0.203648] pci 0000:00:00.2: [1106:2204] type 00 class 0x060000
[ 0.204006] pci 0000:00:00.3: [1106:3204] type 00 class 0x060000
[ 0.204380] pci 0000:00:00.4: [1106:4204] type 00 class 0x060000
[ 0.204729] pci 0000:00:00.7: [1106:7204] type 00 class 0x060000
[ 0.205082] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400
[ 0.205151] pci 0000:00:01.0: supports D1
[ 0.205464] pci 0000:00:0f.0: [1106:0571] type 00 class 0x01018a
[ 0.205532] pci 0000:00:0f.0: reg 0x20: [io 0xfc00-0xfc0f]
[ 0.205559] pci 0000:00:0f.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.205621] pci 0000:00:0f.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.205681] pci 0000:00:0f.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.205741] pci 0000:00:0f.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.206097] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[ 0.206165] pci 0000:00:10.0: reg 0x20: [io 0xec00-0xec1f]
[ 0.206214] pci 0000:00:10.0: supports D1 D2
[ 0.206217] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.206501] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.206740] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[ 0.206807] pci 0000:00:10.1: reg 0x20: [io 0xe880-0xe89f]
[ 0.206856] pci 0000:00:10.1: supports D1 D2
[ 0.206859] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.207020] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.207260] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[ 0.207327] pci 0000:00:10.2: reg 0x20: [io 0xe800-0xe81f]
[ 0.207377] pci 0000:00:10.2: supports D1 D2
[ 0.207380] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.207541] pci 0000:00:10.2: System wakeup disabled by ACPI
[ 0.207780] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[ 0.207846] pci 0000:00:10.3: reg 0x20: [io 0xe480-0xe49f]
[ 0.207895] pci 0000:00:10.3: supports D1 D2
[ 0.207898] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208070] pci 0000:00:10.3: System wakeup disabled by ACPI
[ 0.208313] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[ 0.208347] pci 0000:00:10.4: reg 0x10: [mem 0xff6ffc00-0xff6ffcff]
[ 0.208436] pci 0000:00:10.4: supports D1 D2
[ 0.208440] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208602] pci 0000:00:10.4: System wakeup disabled by ACPI
[ 0.208846] pci 0000:00:11.0: [1106:3287] type 00 class 0x060100
[ 0.209266] pci 0000:00:11.7: [1106:287e] type 00 class 0x060000
[ 0.209627] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[ 0.209658] pci 0000:00:12.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.209671] pci 0000:00:12.0: reg 0x14: [mem 0xff6ff800-0xff6ff8ff]
[ 0.209750] pci 0000:00:12.0: supports D1 D2
[ 0.209753] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.209915] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.210158] pci 0000:00:13.0: [1106:287b] type 01 class 0x060400
[ 0.210483] pci 0000:00:13.1: [1106:287a] type 01 class 0x060400
[ 0.210686] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.210941] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.211246] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.211548] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.211847] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.212275] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.212337] pci 0000:00:01.0: bridge window [io 0xa000-0xcfff]
[ 0.212343] pci 0000:00:01.0: bridge window [mem 0xff400000-0xff4fffff]
[ 0.212349] pci 0000:00:01.0: bridge window [mem 0x7ff00000-0xbfefffff pref]
[ 0.212368] pci 0000:01:00.0: [1002:4153] type 00 class 0x030000
[ 0.212394] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff pref]
[ 0.212405] pci 0000:01:00.0: reg 0x14: [io 0xc000-0xc0ff]
[ 0.212415] pci 0000:01:00.0: reg 0x18: [mem 0xff4f0000-0xff4fffff]
[ 0.212447] pci 0000:01:00.0: reg 0x30: [mem 0xff4c0000-0xff4dffff pref]
[ 0.212481] pci 0000:01:00.0: supports D1 D2
[ 0.212641] pci 0000:01:00.1: [1002:4173] type 00 class 0x038000
[ 0.212664] pci 0000:01:00.1: reg 0x10: [mem 0x90000000-0x9fffffff pref]
[ 0.212674] pci 0000:01:00.1: reg 0x14: [mem 0xff4e0000-0xff4effff]
[ 0.212741] pci 0000:01:00.1: supports D1 D2
[ 0.213090] pci 0000:00:13.0: PCI bridge to [bus 02-04]
[ 0.213173] pci 0000:02:00.0: [1106:287c] type 01 class 0x060400
[ 0.213252] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.213316] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.213555] pci 0000:02:00.1: [1106:287d] type 01 class 0x060400
[ 0.213633] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 0.213860] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.214106] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.214302] pci 0000:02:00.1: PCI bridge to [bus 04]
[ 0.214502] pci 0000:00:13.1: PCI bridge to [bus 05]
[ 0.214563] pci 0000:00:13.1: bridge window [io 0xd000-0xdfff]
[ 0.214569] pci 0000:00:13.1: bridge window [mem 0xff500000-0xff5fffff]
[ 0.214612] pci 0000:05:0b.0: [1102:0004] type 00 class 0x040100
[ 0.214641] pci 0000:05:0b.0: reg 0x10: [io 0xd800-0xd83f]
[ 0.214733] pci 0000:05:0b.0: supports D1 D2
[ 0.214892] pci 0000:05:0b.1: [1102:7003] type 00 class 0x098000
[ 0.214919] pci 0000:05:0b.1: reg 0x10: [io 0xdc00-0xdc07]
[ 0.215011] pci 0000:05:0b.1: supports D1 D2
[ 0.215170] pci 0000:05:0b.2: [1102:4001] type 00 class 0x0c0010
[ 0.215200] pci 0000:05:0b.2: reg 0x10: [mem 0xff5ef800-0xff5effff]
[ 0.215214] pci 0000:05:0b.2: reg 0x14: [mem 0xff5e8000-0xff5ebfff]
[ 0.215300] pci 0000:05:0b.2: supports D1 D2
[ 0.215303] pci 0000:05:0b.2: PME# supported from D0 D1 D2 D3hot
[ 0.215503] pci 0000:05:0c.0: [1044:a400] type 00 class 0x010000
[ 0.215524] pci 0000:05:0c.0: reg 0x10: [io 0xd880-0xd89f]
[ 0.215586] pci 0000:05:0c.0: reg 0x30: [mem 0xff5f0000-0xff5f7fff pref]
[ 0.215799] pci_bus 0000:00: on NUMA node 0
[ 0.218541] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.219282] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.220009] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.220722] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.221438] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.222246] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.223054] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.223862] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.225508] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.225569] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.225645] vgaarb: loaded
[ 0.225700] vgaarb: bridge control possible 0000:01:00.0
[ 0.228044] PCI: Using ACPI for IRQ routing
[ 0.228106] PCI: pci_cache_line_size set to 64 bytes
[ 0.228209] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.228221] e820: reserve RAM buffer [mem 0x3ffb0000-0x3fffffff]
[ 0.229541] clocksource: Switched to clocksource refined-jiffies
[ 0.249689] pnp: PnP ACPI init
[ 0.250095] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.251342] pnp 00:01: [dma 3]
[ 0.251688] pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.252035] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.252179] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.252604] system 00:03: [io 0x03e0-0x03e7] has been reserved
[ 0.252666] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.252727] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.252787] system 00:03: [io 0x0400-0x041f] has been reserved
[ 0.252848] system 00:03: [mem 0xff780000-0xffffffff] has been reserved
[ 0.252910] system 00:03: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.252975] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.253258] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.253321] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.253386] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.253571] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.253801] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.254421] pnp 00:07: [dma 0 disabled]
[ 0.254599] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.254815] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.254880] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.255513] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.255577] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.255639] system 00:09: [mem 0x00100000-0x3fffffff] could not be reserved
[ 0.255705] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.256075] pnp: PnP ACPI: found 10 devices
[ 0.298658] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.299804] clocksource: Switched to clocksource acpi_pm
[ 0.299903] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.299964] pci 0000:00:01.0: bridge window [io 0xa000-0xcfff]
[ 0.299964] pci 0000:00:01.0: bridge window [mem 0xff400000-0xff4fffff]
[ 0.299964] pci 0000:00:01.0: bridge window [mem 0x7ff00000-0xbfefffff pref]
[ 0.299964] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.299964] pci 0000:02:00.1: PCI bridge to [bus 04]
[ 0.299964] pci 0000:00:13.0: PCI bridge to [bus 02-04]
[ 0.299964] pci 0000:00:13.1: PCI bridge to [bus 05]
[ 0.299964] pci 0000:00:13.1: bridge window [io 0xd000-0xdfff]
[ 0.299964] pci 0000:00:13.1: bridge window [mem 0xff500000-0xff5fffff]
[ 0.299964] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.299964] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.299964] pci_bus 0000:00: resource 6 [mem 0x40000000-0xffffffff]
[ 0.299964] pci_bus 0000:01: resource 0 [io 0xa000-0xcfff]
[ 0.299964] pci_bus 0000:01: resource 1 [mem 0xff400000-0xff4fffff]
[ 0.299964] pci_bus 0000:01: resource 2 [mem 0x7ff00000-0xbfefffff pref]
[ 0.299964] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.299964] pci_bus 0000:05: resource 1 [mem 0xff500000-0xff5fffff]
[ 0.299964] NET: Registered protocol family 2
[ 0.299964] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.299964] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.299964] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.299964] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.299964] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.299964] NET: Registered protocol family 1
[ 0.299964] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.299964] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.299964] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.299964] PCI: CLS 64 bytes, default 64
[ 0.300118] Unpacking initramfs...
[ 0.799897] Freeing initrd memory: 15676K (f6152000 - f70a1000)
[ 0.800126] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd43c82186, max_idle_ns: 440795303188 ns
[ 0.800270] microcode: AMD CPU family 0xf not supported
[ 0.801452] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.801612] audit: initializing netlink subsys (disabled)
[ 0.801781] audit: type=2000 audit(1441606292.799:1): initialized
[ 0.802785] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.803274] VFS: Disk quotas dquot_6.6.0
[ 0.803365] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.806217] bounce: pool size: 64 pages
[ 0.806310] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.810567] io scheduler noop registered
[ 0.810626] io scheduler deadline registered
[ 0.810707] io scheduler cfq registered (default)
[ 0.811341] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.811423] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.811606] GHES: HEST is not enabled!
[ 0.811817] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.832757] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.834599] Linux agpgart interface v0.103
[ 0.834693] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
[ 0.841825] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.842710] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.843484] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.844127] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.844756] mousedev: PS/2 mouse device common for all mice
[ 0.845245] rtc_cmos 00:00: RTC can wake from S4
[ 0.845803] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.845902] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
[ 0.846374] NET: Registered protocol family 10
[ 0.851332] mip6: Mobile IPv6
[ 0.851421] NET: Registered protocol family 17
[ 0.851489] mpls_gso: MPLS GSO support
[ 0.852074] Using IPI No-Shortcut mode
[ 0.852688] registered taskstats version 1
[ 0.862255] rtc_cmos 00:00: setting system clock to 2015-09-07 06:11:33 UTC (1441606293)
[ 0.862608] PM: Hibernation image not present or could not be loaded.
[ 0.863636] Freeing unused kernel memory: 520K (c17ee000 - c1870000)
[ 0.863817] Write protecting the kernel text: 5480k
[ 0.864111] Write protecting the kernel read-only data: 2084k
[ 0.867742] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.958967] random: udevadm urandom read with 0 bits of entropy available
[ 1.107063] SCSI subsystem initialized
[ 1.111680] ACPI: bus type USB registered
[ 1.111857] usbcore: registered new interface driver usbfs
[ 1.120164] usbcore: registered new interface driver hub
[ 1.120894] usbcore: registered new device driver usb
[ 1.125803] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.126627] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.127429] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.127960] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.129021] ehci-pci: EHCI PCI platform driver
[ 1.129574] uhci_hcd 0000:00:10.0: detected 2 ports
[ 1.129772] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000ec00
[ 1.132848] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 1.134150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.134214] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.134284] usb usb1: Product: UHCI Host Controller
[ 1.134342] usb usb1: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.134400] usb usb1: SerialNumber: 0000:00:10.0
[ 1.140542] libata version 3.00 loaded.
[ 1.142054] hub 1-0:1.0: USB hub found
[ 1.143366] hub 1-0:1.0: 2 ports detected
[ 1.159776] ehci-pci 0000:00:10.4: EHCI Host Controller
[ 1.159886] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 2
[ 1.159980] ehci-pci 0000:00:10.4: debug port 1
[ 1.160242] ehci-pci 0000:00:10.4: irq 22, io mem 0xff6ffc00
[ 1.172112] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 1.172609] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.172670] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.172741] usb usb2: Product: EHCI Host Controller
[ 1.172798] usb usb2: Manufacturer: Linux 4.2.0+ ehci_hcd
[ 1.172856] usb usb2: SerialNumber: 0000:00:10.4
[ 1.173851] hub 2-0:1.0: USB hub found
[ 1.173972] hub 2-0:1.0: 8 ports detected
[ 1.196436] hub 1-0:1.0: USB hub found
[ 1.196574] hub 1-0:1.0: 2 ports detected
[ 1.198650] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1e000, 00:13:d4:cc:9b:57, IRQ 23
[ 1.199497] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1
[ 1.199747] pata_via 0000:00:0f.0: version 0.3.4
[ 1.204744] firewire_ohci 0000:05:0b.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.208101] scsi host0: pata_via
[ 1.214579] scsi host1: pata_via
[ 1.214888] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.214950] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.215852] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.215928] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.216097] uhci_hcd 0000:00:10.1: detected 2 ports
[ 1.216180] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e880
[ 1.216436] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.216497] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.216568] usb usb3: Product: UHCI Host Controller
[ 1.216625] usb usb3: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.216683] usb usb3: SerialNumber: 0000:00:10.1
[ 1.217435] hub 3-0:1.0: USB hub found
[ 1.217515] hub 3-0:1.0: 2 ports detected
[ 1.218331] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.218427] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.218509] uhci_hcd 0000:00:10.2: detected 2 ports
[ 1.218612] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
[ 1.218830] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.218891] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.218961] usb usb4: Product: UHCI Host Controller
[ 1.219019] usb usb4: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.219077] usb usb4: SerialNumber: 0000:00:10.2
[ 1.223414] hub 4-0:1.0: USB hub found
[ 1.223507] hub 4-0:1.0: 2 ports detected
[ 1.226175] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 1.226254] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 1.226334] uhci_hcd 0000:00:10.3: detected 2 ports
[ 1.226440] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000e480
[ 1.231499] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.231565] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.231635] usb usb5: Product: UHCI Host Controller
[ 1.231693] usb usb5: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.231751] usb usb5: SerialNumber: 0000:00:10.3
[ 1.235950] hub 5-0:1.0: USB hub found
[ 1.236636] hub 5-0:1.0: 2 ports detected
[ 1.389490] ata1.00: ATA-8: WDC WD3200AAJB-00WGA0, 00.02C01, max UDMA/100
[ 1.389556] ata1.00: 625142448 sectors, multi 16: LBA48
[ 1.397154] ata1.00: configured for UDMA/100
[ 1.417415] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAJB-0 2C01 PQ: 0 ANSI: 5
[ 1.484047] usb 2-5: new high-speed USB device number 2 using ehci-pci
[ 1.592360] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A103, max UDMA/33
[ 1.592783] ata2.01: HPA detected: current 66055248, native 78242976
[ 1.592843] ata2.01: ATA-6: SAMSUNG SP4002H, QU100-57, max UDMA/100
[ 1.592903] ata2.01: 66055248 sectors, multi 16: LBA
[ 1.592966] ata2.01: limited to UDMA/33 due to 40-wire cable
[ 1.608245] ata2.00: configured for UDMA/33
[ 1.624604] ata2.01: configured for UDMA/33
[ 1.626143] usb 2-5: New USB device found, idVendor=13fe, idProduct=1e23
[ 1.626205] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.626266] usb 2-5: Product: STORE N GO
[ 1.626323] usb 2-5: Manufacturer: Verbatim
[ 1.626380] usb 2-5: SerialNumber: 078A18B40293
[ 1.642927] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.643166] sd 0:0:0:0: [sda] Write Protect is off
[ 1.643226] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.643295] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.654079] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
[ 1.667529] scsi 1:0:1:0: Direct-Access ATA SAMSUNG SP4002H 0-57 PQ: 0 ANSI: 5
[ 1.668549] sd 1:0:1:0: [sdb] 66055248 512-byte logical blocks: (33.8 GB/31.4 GiB)
[ 1.668781] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.668840] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.668909] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.681708] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 1.685166] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.705060] firewire_core 0000:05:0b.2: created device fw0: GUID 00023c0153000612, S400
[ 1.711329] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sdb3
[ 1.711792] sdb: p3 size 13333950 extends beyond EOD, enabling native capacity
[ 1.712102] ata2: soft resetting link
[ 1.884366] ata2.01: n_sectors mismatch 66055248 != 78242976
[ 1.884426] ata2.01: new n_sectors matches native, probably late HPA unlock, n_sectors updated
[ 1.908227] ata2.00: configured for UDMA/33
[ 1.924587] ata2.01: configured for UDMA/33
[ 1.926790] ata2: EH complete
[ 1.927542] sd 1:0:1:0: [sdb] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
[ 1.929923] sdb: detected capacity change from 33820286976 to 40060403712
[ 1.986709] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sdb3
[ 1.990123] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 1.991830] uas: Unknown symbol usb_stor_adjust_quirks (err 0)
[ 1.991945] uas: Unknown symbol usb_stor_sense_invalidCDB (err 0)
[ 2.013013] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.013093] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.014624] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.797383] random: nonblocking pool is initialized
[ 4.136490] floppy0: no floppy controllers found
[ 4.167567] PM: Starting manual resume from disk
[ 4.167652] PM: Hibernation image partition 8:5 present
[ 4.167654] PM: Looking for hibernation image.
[ 4.168514] PM: Image not found (code -22)
[ 4.168518] PM: Hibernation image not present or could not be loaded.
[ 4.176107] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 4.176114] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 4.176118] PM: Basic memory bitmaps created
[ 4.176753] PM: Basic memory bitmaps freed
[ 5.314103] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem
[ 5.340393] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 9.556505] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 9.556591] ACPI: Sleep Button [SLPB]
[ 9.556854] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 9.556929] ACPI: Power Button [PWRB]
[ 9.557187] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.557260] ACPI: Power Button [PWRF]
[ 9.720661] parport_pc 00:01: reported by Plug and Play ACPI
[ 9.721075] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 9.835629] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.886893] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.887126] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.887331] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 10.347415] gameport gameport0: EMU10K1 is pci0000:05:0b.1/gameport0, io 0xdc00, speed 1209kHz
[ 10.978626] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 11.148338] [drm] Initialized drm 1.1.0 20060810
[ 11.221041] EDAC MC: Ver: 3.0.0
[ 11.244739] Error: Driver 'pcspkr' is already registered, aborting...
[ 11.259682] MCE: In-kernel MCE decoding enabled.
[ 11.362154] AMD64 EDAC driver v3.4.0
[ 11.362286] EDAC amd64: DRAM ECC enabled.
[ 11.362345] EDAC amd64: K8 revE or earlier detected (node 0).
[ 11.365660] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 11.372427] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 11.372508] EDAC amd64: amd64_edac on 32-bit is unsupported. USE AT YOUR OWN RISK!
[ 11.588985] powernow_k8: fid 0xc (2000 MHz), vid 0x6
[ 11.589049] powernow_k8: fid 0xa (1800 MHz), vid 0x8
[ 11.589107] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[ 11.591254] powernow_k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
[ 11.733388] snd_emu10k1 0000:05:0b.0: Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
[ 12.261560] [drm] radeon kernel modesetting enabled.
[ 12.289799] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 12.292448] [drm] initializing kernel modesetting (RV350 0x1002:0x4153 0x1458:0x4050).
[ 12.292593] [drm] register mmio base: 0xFF4F0000
[ 12.292650] [drm] register mmio size: 65536
[ 12.293897] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 12.293976] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 12.301207] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[ 12.301312] radeon 0000:01:00.0: GTT: 256M 0xD0000000 - 0xDFFFFFFF
[ 12.301373] [drm] Generation 2 PCI interface, using max accessible memory
[ 12.301436] radeon 0000:01:00.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used)
[ 12.301566] [drm] Detected VRAM RAM=256M, BAR=256M
[ 12.301624] [drm] RAM width 128bits DDR
[ 12.311341] [TTM] Zone kernel: Available graphics memory: 440924 kiB
[ 12.311407] [TTM] Zone highmem: Available graphics memory: 510400 kiB
[ 12.311466] [TTM] Initializing pool allocator
[ 12.311574] [TTM] Initializing DMA pool allocator
[ 12.315904] [drm] radeon: 256M of VRAM memory ready
[ 12.315971] [drm] radeon: 256M of GTT memory ready.
[ 12.317955] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 12.330111] ppdev: user-space parallel port driver
[ 12.334617] radeon 0000:01:00.0: WB disabled
[ 12.334685] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xf81b6000
[ 12.334765] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.334824] [drm] Driver supports precise vblank timestamp query.
[ 12.335053] [drm] radeon: irq initialized.
[ 12.335151] [drm] Loading R300 Microcode
[ 12.872738] floppy0: no floppy controllers found
[ 12.882778] [drm] radeon: ring at 0x00000000D0001000
[ 12.883009] [drm] ring test succeeded in 0 usecs
[ 12.883900] [drm] ib test succeeded in 0 usecs
[ 12.896117] [drm] Radeon Display Connectors
[ 12.896181] [drm] Connector 0:
[ 12.896236] [drm] VGA-1
[ 12.896292] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 12.896350] [drm] Encoders:
[ 12.896405] [drm] CRT1: INTERNAL_DAC1
[ 12.896461] [drm] Connector 1:
[ 12.896516] [drm] DVI-I-1
[ 12.896570] [drm] HPD1
[ 12.896625] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 12.896684] [drm] Encoders:
[ 12.896738] [drm] CRT2: INTERNAL_DAC2
[ 12.896794] [drm] DFP1: INTERNAL_TMDS1
[ 12.896850] [drm] Connector 2:
[ 12.896905] [drm] SVIDEO-1
[ 12.896959] [drm] Encoders:
[ 12.897013] [drm] TV1: INTERNAL_DAC2
[ 13.090790] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 13.098912] [drm] fb mappable at 0xA0040000
[ 13.098974] [drm] vram apper at 0xA0000000
[ 13.099030] [drm] size 8294400
[ 13.099085] [drm] fb depth is 24
[ 13.099140] [drm] pitch is 7680
[ 13.101272] fbcon: radeondrmfb (fb0) is primary device
[ 13.104694] scsi host2: usb-storage 2-5:1.0
[ 13.105226] usbcore: registered new interface driver usb-storage
[ 13.175770] usbcore: registered new interface driver uas
[ 13.297365] Console: switching to colour frame buffer device 240x67
[ 13.484537] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 13.496955] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 14.112836] scsi 2:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
[ 14.122875] sd 2:0:0:0: [sdc] 3911680 512-byte logical blocks: (2.00 GB/1.86 GiB)
[ 14.124262] sd 2:0:0:0: [sdc] Write Protect is off
[ 14.124703] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 14.125363] sd 2:0:0:0: [sdc] No Caching mode page found
[ 14.125848] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 14.133011] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 14.280297] sdc: sdc1
[ 14.283729] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 15.288573] ata1.00: configured for UDMA/100
[ 15.288967] ata1: EH complete
[ 15.368253] ata2.00: configured for UDMA/33
[ 15.376333] ata2.01: configured for UDMA/33
[ 15.376707] ata2: EH complete
[ 16.379644] Adding 2200868k swap on /dev/sda5. Priority:-1 extents:1 across:2200868k
[ 16.474822] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 16.990628] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,data=ordered
[ 18.041932] lp0: using parport0 (interrupt-driven).
[ 18.217202] Loading iSCSI transport class v2.0-870.
[ 18.286182] iscsi: registered transport (tcp)
[ 18.464704] iscsi: registered transport (iser)
[ 18.564158] fuse init (API version 7.23)
[ 18.773873] tun: Universal TUN/TAP device driver, 1.6
[ 18.801725] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 18.872125] w83627ehf: Found W83627EHG chip at 0x290
[ 18.902539] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB_.PCI0.SBRG.SIOR.HWRE) (20150818/utaddress-254)
[ 18.931485] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 50.601762] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 50.660438] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 50.744572] FAT-fs (sda6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 50.815779] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 95.301954] EATA/DMA 2.0x: Copyright (C) 1994-2003 Dario Ballabio.
[ 95.302530] EATA config options -> tm:1, lc:y, mq:16, rs:y, et:n, ip:n, ep:n, pp:y.
[ 95.303226] EATA0: 2.0C, PCI 0xd890, IRQ 10, BMST, SG 122, MB 64.
[ 95.303778] EATA0: wide SCSI support enabled, max_id 16, max_lun 8.
[ 95.304430] EATA0: SCSI channel 0 enabled, host target ID 7.
[ 95.304957] scsi host3: EATA/DMA 2.0x rev. 8.10.00
[ 96.869441] scsi 3:0:6:0: Direct-Access IBM DCAS-34330W S65A PQ: 0 ANSI: 2
[ 96.870191] scsi 3:0:6:0: cmds/lun 16, sorted, simple tags.
[ 98.944791] sd 3:0:6:0: Attached scsi generic sg4 type 0
[ 98.946384] sd 3:0:6:0: [sdd] 8466688 512-byte logical blocks: (4.33 GB/4.03 GiB)
[ 98.981881] sd 3:0:6:0: [sdd] Write Protect is off
[ 98.982332] sd 3:0:6:0: [sdd] Mode Sense: b3 00 00 08
[ 99.002590] sd 3:0:6:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 99.083991] sdd: sdd1 sdd2 < sdd5 >
[ 99.151142] sd 3:0:6:0: [sdd] Attached SCSI disk
CPU0
0: 44 IO-APIC 2-edge timer
1: 365 IO-APIC 1-edge i8042
7: 1 IO-APIC 7-edge parport0
8: 1 IO-APIC 8-edge rtc0
9: 0 IO-APIC 9-fasteoi acpi
10: 0 IO-APIC 10-edge EATA
12: 157 IO-APIC 12-edge i8042
14: 13173 IO-APIC 14-edge pata_via
15: 682 IO-APIC 15-edge pata_via
16: 300 IO-APIC 16-fasteoi snd_emu10k1, radeon
17: 301 IO-APIC 17-fasteoi firewire_ohci
20: 0 IO-APIC 20-fasteoi uhci_hcd:usb1
21: 0 IO-APIC 21-fasteoi uhci_hcd:usb4
22: 933 IO-APIC 22-fasteoi ehci_hcd:usb2, uhci_hcd:usb3
23: 240 IO-APIC 23-fasteoi uhci_hcd:usb5, eth0
NMI: 2 Non-maskable interrupts
LOC: 12596 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 2 Performance monitoring interrupts
IWI: 0 IRQ work interrupts
RTR: 0 APIC ICR read retries
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
DFR: 0 Deferred Error APIC interrupts
MCE: 0 Machine check exceptions
MCP: 1 Machine check polls
ERR: 1
MIS: 0
PIN: 0 Posted-interrupt notification event
PIW: 0 Posted-interrupt wakeup event
