On 08/24/2015 05:02 AM, Wouter Depuydt wrote:
Wouter Depuydt <wouter.depuydt <at> gmail.com> writes:
-----Original Message-----
From: Peter Zijlstra [mailto:peterz <at> infradead.org]
Sent: Friday, May 22, 2015 11:40 AM
To: Tomas Henzl
Cc: Oelke, Mark; don.brace <at> pmcs.com; ISS StorageDev; storagedev <at>
pmcs.com; linux-scsi <at> vger.kernel.org
Subject: Re: [BUG] hpsa: Controller lockup detected: 0x00150028
On Fri, May 22, 2015 at 05:10:44PM +0200, Tomas Henzl wrote:
I've updated to 6.62 and it appears to be working now; or rather,
it has
I've since gotten 6.64 from HP to test; which does not seem public yet.
6.64 actually fixes the issue for me.
Hi everone,
I've experienced a similar problem with a P411 controller in HBA mode.
Serial Number PDNMH0ARH8P04A
Model HP Smart Array P441 Controller
Firmware Version 2.52
Other System info:
HP Proliant D380p Gen9
Ubuntu LTS 14.04
ii linux-image-3.19.0-26-generic
ii linux-image-extra-3.19.0-26-generic
ii linux-image-generic-lts-vivid
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
I see this issue addressed in the Firmware update page under the "Fixes"
tab.
http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=3984645&swItemId=MTX_55b304486f544f148de6c5cc6e&swEnvOid=4103#tab4
Problems Fixed:
Running SMARTCTL (smartmontools) on HP Proliant G6/G7 (Px1x) Smart
Array controllers that have firmware version 5.70 to 6.62 installed with
SATA drives attached may result in system not responding or reboot. Wehn
reboot occurred, a reboot 1719 POST error message with lockup 0x15
displayed.
Hope this helps you.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
