On 11.8.2015 11:36, Viswas.G@xxxxxxxx wrote:
> From: Viswas G <Viswas.G@xxxxxxxx>
>
> In Nexus reset the device state request are not needed.
>
> Changes from V1:
> Device state change request has been removed as the firmware
> will handle it during internal cleanup. Also updated the
> proper return value in case of failures.
>
> Signed-off-by: Viswas G <Viswas.G@xxxxxxxx>
>
> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@xxxxxxxx>
Reviewed-by: Tomas Henzl <thenzl@xxxxxxxxxx>
Tomas
> ---
> drivers/scsi/pm8001/pm8001_sas.c | 18 +++++++++++++-----
> drivers/scsi/pm8001/pm8001_sas.h | 8 ++++++++
> 2 files changed, 21 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
> index b93f289..48f4627 100644
> --- a/drivers/scsi/pm8001/pm8001_sas.c
> +++ b/drivers/scsi/pm8001/pm8001_sas.c
> @@ -975,19 +975,27 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev)
> phy = sas_get_local_phy(dev);
>
> if (dev_is_sata(dev)) {
> - DECLARE_COMPLETION_ONSTACK(completion_setstate);
> if (scsi_is_sas_phy_local(phy)) {
> rc = 0;
> goto out;
> }
> rc = sas_phy_reset(phy, 1);
> + if (rc) {
> + PM8001_EH_DBG(pm8001_ha,
> + pm8001_printk("phy reset failed for device %x\n"
> + "with rc %d\n", pm8001_dev->device_id, rc));
> + rc = TMF_RESP_FUNC_FAILED;
> + goto out;
> + }
> msleep(2000);
> rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
> dev, 1, 0);
> - pm8001_dev->setds_completion = &completion_setstate;
> - rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
> - pm8001_dev, 0x01);
> - wait_for_completion(&completion_setstate);
> + if (rc) {
> + PM8001_EH_DBG(pm8001_ha,
> + pm8001_printk("task abort failed %x\n"
> + "with rc %d\n", pm8001_dev->device_id, rc));
> + rc = TMF_RESP_FUNC_FAILED;
> + }
> } else {
> rc = sas_phy_reset(phy, 1);
> msleep(2000);
> diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
> index 8dd8b78..c9736cc 100644
> --- a/drivers/scsi/pm8001/pm8001_sas.h
> +++ b/drivers/scsi/pm8001/pm8001_sas.h
> @@ -569,6 +569,14 @@ struct pm8001_fw_image_header {
> #define NCQ_READ_LOG_FLAG 0x80000000
> #define NCQ_ABORT_ALL_FLAG 0x40000000
> #define NCQ_2ND_RLE_FLAG 0x20000000
> +
> +/* Device states */
> +#define DS_OPERATIONAL 0x01
> +#define DS_PORT_IN_RESET 0x02
> +#define DS_IN_RECOVERY 0x03
> +#define DS_IN_ERROR 0x04
> +#define DS_NON_OPERATIONAL 0x07
> +
> /**
> * brief param structure for firmware flash update.
> */
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
