https://bugzilla.kernel.org/show_bug.cgi?id=98171 Carlos Guidugli <guidugli@xxxxxxxxx> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |guidugli@xxxxxxxxx --- Comment #4 from Carlos Guidugli <guidugli@xxxxxxxxx> --- Hi, I am also having the same issue with Fedora 22, kernel 4.1.3-200.fc22.x86_64. Any recommendations? [ 0.828869] ata9: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610100 irq 35 [ 0.828873] ata10: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610180 irq 35 [ 0.828877] ata11: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610200 irq 35 [ 0.828880] ata12: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610280 irq 35 [ 0.828884] ata13: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610300 irq 35 [ 0.828887] ata14: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610380 irq 35 [ 0.828890] ata15: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610400 irq 35 [ 0.828894] ata16: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610480 irq 35 [ 1.116331] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.117021] ata1.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133 [ 1.117026] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.118349] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.119026] ata6.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133 [ 1.119031] ata6.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.119341] ata8: SATA link down (SStatus 0 SControl 300) [ 1.119346] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.119377] ata7: SATA link down (SStatus 0 SControl 300) [ 1.119394] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.119413] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.119740] ata6.00: configured for UDMA/133 [ 1.120073] ata5.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133 [ 1.120078] ata5.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.120798] ata5.00: configured for UDMA/133 [ 1.134350] ata14: SATA link down (SStatus 0 SControl 300) [ 1.134376] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.134401] ata12: SATA link down (SStatus 0 SControl 300) [ 1.134498] ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 [ 1.134652] ata16.00: configured for UDMA/66 [ 1.136354] ata15: SATA link down (SStatus 0 SControl 300) [ 1.136379] ata10: SATA link down (SStatus 0 SControl 300) [ 1.136403] ata11: SATA link down (SStatus 0 SControl 300) [ 1.136425] ata9: SATA link down (SStatus 0 SControl 300) [ 1.136446] ata13: SATA link down (SStatus 0 SControl 300) [ 1.323489] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.327731] ata3.00: HPA detected: current 3907027055, native 3907029168 [ 1.327822] ata2.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133 [ 1.327827] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.327839] ata3.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133 [ 1.327844] ata3.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.327966] ata4.00: HPA detected: current 3907027055, native 3907029168 [ 1.328069] ata4.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133 [ 1.328073] ata4.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.328281] ata1.00: configured for UDMA/133 [ 1.328518] scsi 0:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 5 [ 1.328620] ata2.00: configured for UDMA/133 [ 1.328965] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.329004] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB) [ 1.329009] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.329214] sd 0:0:0:0: [sda] Write Protect is off [ 1.329219] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.329250] scsi 1:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 5 [ 1.329348] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.329652] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB) [ 1.329657] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.329669] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.329782] sd 1:0:0:0: [sdb] Write Protect is off [ 1.329788] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.329880] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.332247] ata3.00: configured for UDMA/133 [ 1.332429] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARS-00S 0A80 PQ: 0 ANSI: 5 [ 1.332811] sd 2:0:0:0: [sdc] 3907027055 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.332851] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.332899] sd 2:0:0:0: [sdc] Write Protect is off [ 1.332905] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.332970] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.332977] ata4.00: configured for UDMA/133 [ 1.333102] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00S 0A80 PQ: 0 ANSI: 5 [ 1.333464] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.333469] sd 3:0:0:0: [sdd] 3907027055 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.333623] sd 3:0:0:0: [sdd] Write Protect is off [ 1.333628] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.333674] scsi 4:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 5 [ 1.333677] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.333991] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 1.334035] sd 4:0:0:0: [sde] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB) [ 1.334040] sd 4:0:0:0: [sde] 4096-byte physical blocks [ 1.334180] sd 4:0:0:0: [sde] Write Protect is off [ 1.334185] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.334231] scsi 5:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82 PQ: 0 ANSI: 5 [ 1.334233] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.334527] sd 5:0:0:0: [sdf] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB) [ 1.334532] sd 5:0:0:0: [sdf] 4096-byte physical blocks [ 1.334548] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 1.334647] sd 5:0:0:0: [sdf] Write Protect is off [ 1.334653] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 1.334768] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.335031] scsi 15:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5 [ 1.346509] ata16.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1.346662] ata16.00: irq_stat 0x40000001 [ 1.346796] ata16.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) [ 1.347344] ata16: hard resetting link [ 1.350686] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.350688] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.354182] sd 5:0:0:0: [sdf] Attached SCSI disk [ 1.355834] sd 4:0:0:0: [sde] Attached SCSI disk [ 1.787613] sd 3:0:0:0: [sdd] Attached SCSI disk [ 1.788180] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.832932] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.883536] ata16.00: configured for UDMA/66 [ 1.883621] ata16: EH complete [ 1.883920] scsi 15:0:0:0: Attached scsi generic sg6 type 3 Have two Marvell controllers: 04:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11) 09:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller (rev 11) -- You are receiving this mail because: You are watching the assignee of the bug. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
