Commit f3ddac1918fe963bcbf8d407a3a3c0881b47248b ("[SCSI] qla2xxx:
Disable adapter when we encounter a PCI disconnect.") has introduced a
code that disables the board, releasing some resources, when reading
0xffffffff.
In case this happens when there is an EEH, this read will trigger EEH
detection and set PCI channel offline. EEH will be able to recover the
card from this state by doing a reset, so it's a better option than
simply disabling the card.
Since eeh_check_failure will mark the channel as offline before
returning the read value, in case there really was an EEH, we can simply
check for pci_channel_offline, preventing the board_disable code from
running if it's true.
Without this patch, EEH code will try to access those same resources
that board_disable will try to free. This race can cause EEH recovery to
fail.
[ 504.370577] EEH: Notify device driver to resume
[ 504.370580] qla2xxx [0001:07:00.0]-9002:2: The device failed to
resume I/O from slot/link_reset.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxxxxxx>
Cc: <cascardo@xxxxxxxxxx>
Cc: <mauricfo@xxxxxxxxxxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_isr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index a04a1b1..8132926 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -116,7 +116,7 @@ bool
qla2x00_check_reg32_for_disconnect(scsi_qla_host_t *vha, uint32_t reg)
{
/* Check for PCI disconnection */
- if (reg == 0xffffffff) {
+ if (reg == 0xffffffff && !pci_channel_offline(vha->hw->pdev)) {
if (!test_and_set_bit(PFLG_DISCONNECTED, &vha->pci_flags) &&
!test_bit(PFLG_DRIVER_REMOVING, &vha->pci_flags) &&
!test_bit(PFLG_DRIVER_PROBING, &vha->pci_flags)) {
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
