On 06/18/2015 05:22 AM, Dan Williams wrote: > Praveen reports: > > After some debugging this is what I have found > > sas_phye_loss_of_signal gets triggered on phy_event from mvsas > sas_phye_loss_of_signal calls sas_deform_port > sas_deform_port posts a DISCE_DESTRUCT event (sas_unregister_domain_devices-> sas_unregister_dev) > sas_deform_port calls sas_port_delete > sas_port_delete calls sas_port_delete_link > sysfs_remove_group: kobject 'port-X:Y' > sas_port_delete calls device_del > sysfs_remove_group: kobject 'port-X:Y' > > sas_destruct_devices gets triggered for the destruct event (DISCE_DESTRUCT) > sas_destruct_devices calls sas_rphy_delete > sas_rphy_delete calls scsi_remove_device > scsi_remove_device calls __scsi_remove_device > __scsi_remove_device calls bsg_unregister_queue > bsg_unregister_queue -> device_unregister -> device_del -> sysfs_remove_group: kobject 'X:0:0:0' > > Since X:0:0:0 falls under port-X:Y (which got deleted during > sas_port_delete), this call results in the warning. All the later > warnings in the dmesg output I sent earlier are trying to delete objects > under port-X:Y. Since port-X:Y got recursively deleted, all these calls > result in warnings. Since, the PHY and DISC events are processed in two > different work queues (and one triggers the other), is there any way > other than checking if the object exists in sysfs (in device_del) before > deleting? > > WARNING: CPU: 2 PID: 6 at fs/sysfs/group.c:219 device_del+0x40/0x1c0() > sysfs group ffffffff818b97e0 not found for kobject '2:0:4:0' > [..] > CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: P W O 3.16.7-ckt9-logicube-ng.3 #1 > Hardware name: To be filled by O.E.M. To be filled by O.E.M./VT6085, BIOS 4.6.5 01/23/2015 > Workqueue: scsi_wq_2 sas_destruct_devices [libsas] > 0000000000000009 ffffffff8151cd18 ffff88011b35bcd8 ffffffff810687b7 > ffff88011a661400 ffff88011b35bd28 ffff8800c6e5e968 ffff880000028810 > ffff8800c89f2c00 ffffffff8106881c ffffffff81733b68 0000000000000028 > Call Trace: > [<ffffffff8151cd18>] ? dump_stack+0x41/0x51 > [<ffffffff810687b7>] ? warn_slowpath_common+0x77/0x90 > [<ffffffff8106881c>] ? warn_slowpath_fmt+0x4c/0x50 > [<ffffffff813ad2d0>] ? device_del+0x40/0x1c0 > [<ffffffff813ad46a>] ? device_unregister+0x1a/0x70 > [<ffffffff812a535e>] ? bsg_unregister_queue+0x5e/0xb0 > [<ffffffffa00781a9>] ? __scsi_remove_device+0xa9/0xd0 [scsi_mod] > > It appears we've always been double deleting the devices below sas_port, > but recent sysfs changes now exposes this problem. Libsas should delete > all the devices from rphy down before deleting the parent port. > > Cc: <stable@xxxxxxxxxxxxxxx> > Reported-by: Praveen Murali <pmurali@xxxxxxxxxxxx> > Tested-by: Praveen Murali <pmurali@xxxxxxxxxxxx> > Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx> Reviewed-by: Hannes Reinecke <hare@xxxxxxx> Cheers, Hannes -- Dr. Hannes Reinecke zSeries & Storage hare@xxxxxxx +49 911 74053 688 SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
