Hi,
Any review comments on this patch. please let us known if any changes
are required.
Thanks,
Sreekanth
On Fri, Jun 12, 2015 at 3:12 PM, Sreekanth Reddy
<sreekanth.reddy@xxxxxxxxxxxxx> wrote:
> Added support for below customer specific brandings
>
> "VendorID" "DeviceID" "SubsystemVendor ID" "SubsystemDevice ID" Cisco Branding String
> 0x1000 0x97 0x1137 0x154 Cisco 9300-8i 12Gbps SAS HBA
> 0x1000 0x97 0x1137 0x155 Cisco 12G Modular SAS Pass through Controller
> 0x1000 0x97 0x1137 0x156 UCS C3X60 12G SAS Pass through Controller
>
> Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxxxxxxxx>
> ---
> drivers/scsi/mpt3sas/mpt3sas_base.c | 29 +++++++++++++++++++++++++++--
> drivers/scsi/mpt3sas/mpt3sas_base.h | 16 ++++++++++++----
> 2 files changed, 39 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
> index 0b26c8d..2f2c331 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_base.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
> @@ -2393,9 +2393,17 @@ _base_display_cisco_branding(struct MPT3SAS_ADAPTER *ioc)
> switch (ioc->pdev->device) {
> case MPI25_MFGPAGE_DEVID_SAS3008:
> switch (ioc->pdev->subsystem_device) {
> - case MPT3SAS_CISCO_12G_HBA_SSDID:
> + case MPT3SAS_CISCO_12G_8E_HBA_SSDID:
> pr_info(MPT3SAS_FMT "%s\n", ioc->name,
> - MPT3SAS_CISCO_12G_HBA_BRANDING);
> + MPT3SAS_CISCO_12G_8E_HBA_BRANDING);
> + break;
> + case MPT3SAS_CISCO_12G_8I_HBA_SSDID:
> + pr_info(MPT3SAS_FMT "%s\n", ioc->name,
> + MPT3SAS_CISCO_12G_8I_HBA_BRANDING);
> + break;
> + case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
> + pr_info(MPT3SAS_FMT "%s\n", ioc->name,
> + MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
> break;
> default:
> pr_info(MPT3SAS_FMT
> @@ -2404,6 +2412,23 @@ _base_display_cisco_branding(struct MPT3SAS_ADAPTER *ioc)
> break;
> }
> break;
> + case MPI25_MFGPAGE_DEVID_SAS3108_1:
> + switch (ioc->pdev->subsystem_device) {
> + case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
> + pr_info(MPT3SAS_FMT "%s\n", ioc->name,
> + MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
> + break;
> + case MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID:
> + pr_info(MPT3SAS_FMT "%s\n", ioc->name,
> + MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING);
> + break;
> + default:
> + pr_info(MPT3SAS_FMT
> + "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
> + ioc->name, ioc->pdev->subsystem_device);
> + break;
> + }
> + break;
> default:
> pr_info(MPT3SAS_FMT
> "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
> index a89c752..b97039b 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_base.h
> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
> @@ -165,13 +165,21 @@
> /*
> * Cisco HBA branding
> */
> -#define MPT3SAS_CISCO_12G_HBA_BRANDING \
> - "Cisco 9300-8E 12G SAS HBA"
> -
> +#define MPT3SAS_CISCO_12G_8E_HBA_BRANDING \
> + "Cisco 9300-8E 12G SAS HBA"
> +#define MPT3SAS_CISCO_12G_8I_HBA_BRANDING \
> + "Cisco 9300-8i 12G SAS HBA"
> +#define MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING \
> + "Cisco 12G Modular SAS Pass through Controller"
> +#define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING \
> + "UCS C3X60 12G SAS Pass through Controller"
> /*
> * Cisco HBA SSSDIDs
> */
> - #define MPT3SAS_CISCO_12G_HBA_SSDID 0x14C
> +#define MPT3SAS_CISCO_12G_8E_HBA_SSDID 0x14C
> +#define MPT3SAS_CISCO_12G_8I_HBA_SSDID 0x154
> +#define MPT3SAS_CISCO_12G_AVILA_HBA_SSDID 0x155
> +#define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID 0x156
>
> /*
> * status bits for ioc->diag_buffer_status
> --
> 2.0.2
>
--
Regards,
Sreekanth
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
