On Tue, 2015-05-05 at 22:39 +0900, Akinobu Mita wrote:
> 2015-05-05 6:41 GMT+09:00 James Bottomley
> <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>:
> > On Mon, 2015-05-04 at 16:09 -0400, Alan Stern wrote:
> >> On Mon, 4 May 2015, James Bottomley wrote:
> >>
> >> > However, it does also strike me that these three drivers have problems
> >> > because they're using the wrong initialisation pattern: the template is
> >> > supposed to be in the bus connector for compound drivers not in the
> >> > core.
> >>
> >> Why is it supposed to be done that way? Isn't that less efficient? It
> >> means you have to have a separate copy of the template for each bus
> >> connector driver, instead of letting them all share a common template
> >> in the core.
> >
> > Well, no it doesn't. The way 53c700 implements it is that there is a
> > common template in the core. The drivers just initialise their variant
> > fields (for 53c700 it's name, proc_name and this_id) and the core fills
> > in the rest. Admittedly wd33c93 doesn't quite get this right, that's
> > why I cited 53c700.
>
> I have converted usb-storage and ums-alauda in the attached patch.
> Each ums-* driver needs to expand module_usb_driver() macro as we need
> to initialize their scsi host template in module_init().
Actually, I was more thinking something like this (mirroring 53c700).
It hides more of the internals rather than exposing them.
James
---
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 4b55ab6..6cfc5c2 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -1232,6 +1232,12 @@ static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
return USB_STOR_TRANSPORT_FAILED;
}
+static struct scsi_host_template aluda_template = {
+ .name = "aluda",
+ .proc_name = "aluda",
+ .module = THIS_MODULE,
+};
+
static int alauda_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
@@ -1239,7 +1245,8 @@ static int alauda_probe(struct usb_interface *intf,
int result;
result = usb_stor_probe1(&us, intf, id,
- (id - alauda_usb_ids) + alauda_unusual_dev_list);
+ (id - alauda_usb_ids) + alauda_unusual_dev_list,
+ &aluda_template);
if (result)
return result;
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 0e400f3..3d84a41 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -539,58 +539,58 @@ static struct device_attribute *sysfs_device_attr_list[] = {
/*
* this defines our host template, with which we'll allocate hosts
*/
-
-struct scsi_host_template usb_stor_host_template = {
+void usb_stor_template_init(struct scsi_host_template *tpnt)
+{
/* basic userland interface stuff */
- .name = "usb-storage",
- .proc_name = "usb-storage",
- .show_info = show_info,
- .write_info = write_info,
- .info = host_info,
+ if (!tpnt->name)
+ tpnt->name = "usb-storage";
+ if (!tpnt->proc_name)
+ tpnt->proc_name = "usb-storage";
+
+ tpnt->show_info = show_info;
+ tpnt->write_info = write_info;
+ tpnt->info = host_info;
/* command interface -- queued only */
- .queuecommand = queuecommand,
+ tpnt->queuecommand = queuecommand;
/* error and abort handlers */
- .eh_abort_handler = command_abort,
- .eh_device_reset_handler = device_reset,
- .eh_bus_reset_handler = bus_reset,
+ tpnt->eh_abort_handler = command_abort;
+ tpnt->eh_device_reset_handler = device_reset;
+ tpnt->eh_bus_reset_handler = bus_reset;
/* queue commands only, only one command per LUN */
- .can_queue = 1,
- .cmd_per_lun = 1,
+ tpnt->can_queue = 1;
+ tpnt->cmd_per_lun = 1;
/* unknown initiator id */
- .this_id = -1,
+ tpnt->this_id = -1;
- .slave_alloc = slave_alloc,
- .slave_configure = slave_configure,
- .target_alloc = target_alloc,
+ tpnt->slave_alloc = slave_alloc;
+ tpnt->slave_configure = slave_configure;
+ tpnt->target_alloc = target_alloc;
/* lots of sg segments can be handled */
- .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ tpnt->sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS;
/* limit the total size of a transfer to 120 KB */
- .max_sectors = 240,
+ tpnt->max_sectors = 240;
/* merge commands... this seems to help performance, but
* periodically someone should test to see which setting is more
* optimal.
*/
- .use_clustering = 1,
+ tpnt->use_clustering = 1;
/* emulated HBA */
- .emulated = 1,
+ tpnt->emulated = 1;
/* we do our own delay after a device or bus reset */
- .skip_settle_delay = 1,
+ tpnt->skip_settle_delay = 1;
/* sysfs device attributes */
- .sdev_attrs = sysfs_device_attr_list,
-
- /* module management */
- .module = THIS_MODULE
-};
+ tpnt->sdev_attrs = sysfs_device_attr_list;
+}
/* To Report "Illegal Request: Invalid Field in CDB */
unsigned char usb_stor_sense_invalidCDB[18] = {
diff --git a/drivers/usb/storage/scsiglue.h b/drivers/usb/storage/scsiglue.h
index ffa1cca..ae0ed71 100644
--- a/drivers/usb/storage/scsiglue.h
+++ b/drivers/usb/storage/scsiglue.h
@@ -41,8 +41,8 @@
extern void usb_stor_report_device_reset(struct us_data *us);
extern void usb_stor_report_bus_reset(struct us_data *us);
+extern void usb_stor_template_init(struct scsi_host_template *tpnt);
extern unsigned char usb_stor_sense_invalidCDB[18];
-extern struct scsi_host_template usb_stor_host_template;
#endif
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 5600c33..020d7ed 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -920,7 +920,8 @@ static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
int usb_stor_probe1(struct us_data **pus,
struct usb_interface *intf,
const struct usb_device_id *id,
- struct us_unusual_dev *unusual_dev)
+ struct us_unusual_dev *unusual_dev,
+ struct scsi_host_template *tpnt)
{
struct Scsi_Host *host;
struct us_data *us;
@@ -928,11 +929,13 @@ int usb_stor_probe1(struct us_data **pus,
dev_info(&intf->dev, "USB Mass Storage device detected\n");
+
/*
* Ask the SCSI layer to allocate a host structure, with extra
* space at the end for our private us_data structure.
*/
- host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us));
+ usb_stor_template_init(tpnt);
+ host = scsi_host_alloc(tpnt, sizeof(*us));
if (!host) {
dev_warn(&intf->dev, "Unable to allocate the scsi host\n");
return -ENOMEM;
@@ -1069,6 +1072,10 @@ void usb_stor_disconnect(struct usb_interface *intf)
}
EXPORT_SYMBOL_GPL(usb_stor_disconnect);
+static struct scsi_host_template storage_template = {
+ .module = THIS_MODULE,
+};
+
/* The main probe routine for standard devices */
static int storage_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -1109,7 +1116,7 @@ static int storage_probe(struct usb_interface *intf,
id->idVendor, id->idProduct);
}
- result = usb_stor_probe1(&us, intf, id, unusual_dev);
+ result = usb_stor_probe1(&us, intf, id, unusual_dev, &storage_template);
if (result)
return result;
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 307e339..918cee8 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -197,7 +197,8 @@ extern int usb_stor_post_reset(struct usb_interface *iface);
extern int usb_stor_probe1(struct us_data **pus,
struct usb_interface *intf,
const struct usb_device_id *id,
- struct us_unusual_dev *unusual_dev);
+ struct us_unusual_dev *unusual_dev,
+ struct scsi_host_template *tpnt);
extern int usb_stor_probe2(struct us_data *us);
extern void usb_stor_disconnect(struct usb_interface *intf);
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
