Re: [PATCH v3 5/5] target/file: enable WRITE SAME when protection info is enabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/25/2015 5:33 PM, Akinobu Mita wrote:
Now we can generate correct PI for WRITE SAME command, so it is
unnecessary to disallow WRITE SAME when protection info is enabled.

Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx>
Cc: Nicholas Bellinger <nab@xxxxxxxxxxxxxxx>
Cc: Sagi Grimberg <sagig@xxxxxxxxxxxx>
Cc: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
Cc: "James E.J. Bottomley" <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
Cc: target-devel@xxxxxxxxxxxxxxx
Cc: linux-scsi@xxxxxxxxxxxxxxx
---
* No change from v2

  drivers/target/target_core_file.c | 18 +++++++++++++-----
  1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c
index 829817a..fe98f58 100644
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -376,16 +376,12 @@ fd_execute_write_same(struct se_cmd *cmd)
  	struct bio_vec *bvec;
  	unsigned int len = 0, i;
  	ssize_t ret;
+	sense_reason_t rc;

  	if (!nolb) {
  		target_complete_cmd(cmd, SAM_STAT_GOOD);
  		return 0;
  	}
-	if (cmd->prot_op) {
-		pr_err("WRITE_SAME: Protection information with FILEIO"
-		       " backends not supported\n");
-		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
-	}

  	if (cmd->t_data_nents > 1 ||
  	    cmd->t_data_sg[0].length != cmd->se_dev->dev_attrib.block_size) {
@@ -397,6 +393,10 @@ fd_execute_write_same(struct se_cmd *cmd)
  		return TCM_INVALID_CDB_FIELD;
  	}

+	rc = sbc_dif_verify(cmd, cmd->t_task_lba, nolb, 0, cmd->t_prot_sg, 0);
+	if (rc)
+		return rc;
+
  	bvec = kcalloc(nolb, sizeof(struct bio_vec), GFP_KERNEL);
  	if (!bvec)
  		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
@@ -418,6 +418,14 @@ fd_execute_write_same(struct se_cmd *cmd)
  		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
  	}

+	if (cmd->prot_op) {
+		ret = fd_do_rw(cmd, fd_dev->fd_prot_file, se_dev->prot_length,
+				cmd->t_prot_sg, cmd->t_prot_nents,
+				cmd->prot_length, 1);
+		if (ret < 0)
+			return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
+	}
+
  	target_complete_cmd(cmd, SAM_STAT_GOOD);
  	return 0;
  }


This looks good,

iblock is needed too though. I think you just need a missing call to
iblock_alloc_bip() and you're good to go (you can use scsi_debug with
dif/dix to test it). I think it belongs in the same patch.

Sagi.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux