Wow, I forgot how long it takes to compile a full kernel. Glad I ran
Gentoo for a few years and knew how to compile and apply patches. I
will admit I had to dust off some mental cobwebs.
Pre-patched 4.0.0 kernel tree: Oops, as expected
Patched 4.0.0 kernel tree: IT WORKED!!!!! Basic mount, and checking a
few files all looks good. I will start a RAID check as that should
really push the driver. I will report back tomorrow when it finishes.
Logs below.
[ 5.072154] scsi host4: mvsas
[ 5.180706] floppy0: no floppy controllers found
[ 5.339613] ata12.00: ATA-8: ST32000542AS, CC35, max UDMA/133
[ 5.339616] ata10.00: ATA-7: HDS725050KLA360, K2AOAD1A, max UDMA/133
[ 5.339624] ata10.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.339892] ata11.00: ATA-7: HDS725050KLA360, K2AOAD1A, max UDMA/133
[ 5.339893] ata11.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.340146] ata13.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
[ 5.340147] ata13.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.341015] ata10.00: configured for UDMA/133
[ 5.341344] ata11.00: configured for UDMA/133
[ 5.341406] ata13.00: configured for UDMA/133
[ 5.373207] ata5.00: ATA-8: WDC WD20EADS-11R6B1, 80.00A80, max UDMA/133
[ 5.373208] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.374223] ata8.00: ATA-8: WDC WD20EADS-42R6B0, 02.00A02, max UDMA/133
[ 5.374224] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.379766] ata5.00: configured for UDMA/133
[ 5.380106] ata8.00: configured for UDMA/133
[ 5.397396] ata7.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133
[ 5.397396] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.403539] ata7.00: configured for UDMA/133
[ 5.451846] ata12.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.460457] ata12.00: configured for UDMA/133
[ 5.738535] ata6.00: ATA-8: WDC WD20EADS-11R6B1, 80.00A80, max UDMA/133
[ 5.745214] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.745267] ata9.00: ATA-8: WDC WD20EADS-42R6B0, 02.00A02, max UDMA/133
[ 5.745268] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.765626] ata9.00: configured for UDMA/133
[ 5.771347] ata6.00: configured for UDMA/133
[ 5.784708] scsi 4:0:0:0: Direct-Access ATA WDC
WD20EADS-11R 0A80 PQ: 0 ANSI: 5
[ 5.793137] scsi 4:0:1:0: Direct-Access ATA WDC
WD20EADS-11R 0A80 PQ: 0 ANSI: 5
[ 5.801560] scsi 4:0:2:0: Direct-Access ATA WDC
WD20EARS-00S 0A80 PQ: 0 ANSI: 5
[ 5.809982] scsi 4:0:3:0: Direct-Access ATA WDC
WD20EADS-42R 0A02 PQ: 0 ANSI: 5
[ 5.818404] scsi 4:0:4:0: Direct-Access ATA WDC
WD20EADS-42R 0A02 PQ: 0 ANSI: 5
[ 5.826816] scsi 4:0:5:0: Direct-Access ATA
HDS725050KLA360 AD1A PQ: 0 ANSI: 5
[ 5.835171] scsi 4:0:6:0: Direct-Access ATA
HDS725050KLA360 AD1A PQ: 0 ANSI: 5
[ 5.843526] scsi 4:0:7:0: Direct-Access ATA ST32000542AS
CC35 PQ: 0 ANSI: 5
[ 5.851928] scsi 4:0:8:0: Direct-Access ATA
ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
[ 5.862669] scsi 4:0:9:0: Enclosure LSILOGIC SASX28 A.1
7014 PQ: 0 ANSI: 3
[ 6.140482] scsi 5:0:0:0: Direct-Access Generic USB EDC
1.00 PQ: 0 ANSI: 2
[ 6.148955] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 6.149610] sd 5:0:0:0: [sdc] 2007040 512-byte logical blocks:
(1.02 GB/980 MiB)
[ 6.150218] sd 5:0:0:0: [sdc] Write Protect is off
[ 6.150840] sd 5:0:0:0: [sdc] No Caching mode page found
[ 6.150841] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 6.153552] sdc: sdc1
[ 6.156225] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 6.185605] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 6.185633] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 6.185799] sd 4:0:1:0: Attached scsi generic sg4 type 0
[ 6.185801] sd 4:0:1:0: [sde] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 6.185802] sd 4:0:1:0: [sde] 4096-byte physical blocks
[ 6.185837] sd 4:0:1:0: [sde] Write Protect is off
[ 6.185848] sd 4:0:1:0: [sde] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.185978] sd 4:0:2:0: [sdf] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 6.185986] sd 4:0:2:0: Attached scsi generic sg5 type 0
[ 6.186059] sd 4:0:2:0: [sdf] Write Protect is off
[ 6.186148] sd 4:0:3:0: [sdg] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 6.186149] sd 4:0:2:0: [sdf] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.186163] sd 4:0:3:0: Attached scsi generic sg6 type 0
[ 6.186188] sde: sde1
[ 6.186205] sd 4:0:3:0: [sdg] Write Protect is off
[ 6.186234] sd 4:0:3:0: [sdg] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.186395] sd 4:0:4:0: [sdh] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 6.186417] sd 4:0:1:0: [sde] Attached SCSI disk
[ 6.186439] sd 4:0:4:0: [sdh] Write Protect is off
[ 6.186441] sd 4:0:4:0: Attached scsi generic sg7 type 0
[ 6.186461] sd 4:0:4:0: [sdh] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.186628] sd 4:0:5:0: [sdi] 976773168 512-byte logical blocks:
(500 GB/465 GiB)
[ 6.186670] sd 4:0:5:0: Attached scsi generic sg8 type 0
[ 6.186685] sdf: sdf1
[ 6.186696] sdg: sdg1
[ 6.186726] sd 4:0:5:0: [sdi] Write Protect is off
[ 6.186877] sdh: sdh1
[ 6.186882] sd 4:0:6:0: [sdj] 976773168 512-byte logical blocks:
(500 GB/465 GiB)
[ 6.186905] sd 4:0:2:0: [sdf] Attached SCSI disk
[ 6.186911] sd 4:0:6:0: Attached scsi generic sg9 type 0
[ 6.186925] sd 4:0:5:0: [sdi] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.186945] sd 4:0:3:0: [sdg] Attached SCSI disk
[ 6.186948] sd 4:0:6:0: [sdj] Write Protect is off
[ 6.186977] sd 4:0:6:0: [sdj] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.187142] sd 4:0:4:0: [sdh] Attached SCSI disk
[ 6.187171] sd 4:0:7:0: [sdk] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 6.187198] sd 4:0:7:0: Attached scsi generic sg10 type 0
[ 6.187240] sd 4:0:7:0: [sdk] Write Protect is off
[ 6.187266] sd 4:0:7:0: [sdk] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.187355] sd 4:0:8:0: [sdl] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 6.187377] sd 4:0:8:0: [sdl] Write Protect is off
[ 6.187394] sd 4:0:8:0: [sdl] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.187400] sd 4:0:8:0: Attached scsi generic sg11 type 0
[ 6.187589] scsi 4:0:9:0: Attached scsi generic sg12 type 13
[ 6.200457] sdl: sdl1
[ 6.200601] sd 4:0:8:0: [sdl] Attached SCSI disk
[ 6.202898] sdi: sdi1
[ 6.203316] sd 4:0:5:0: [sdi] Attached SCSI disk
[ 6.203662] random: nonblocking pool is initialized
[ 6.203687] sdj: sdj1
[ 6.204047] sd 4:0:6:0: [sdj] Attached SCSI disk
[ 6.207504] sdk: sdk1
[ 6.207764] sd 4:0:7:0: [sdk] Attached SCSI disk
[ 6.488728] sd 4:0:0:0: [sdd] 4096-byte physical blocks
[ 6.494046] sd 4:0:0:0: [sdd] Write Protect is off
[ 6.498906] sd 4:0:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.508482] sdd: sdd1
[ 6.511045] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 6.654475] md: bind<sdl1>
[ 6.668281] md: bind<sdh1>
[ 6.672779] md: bind<sdd1>
[ 6.677573] md: bind<sdj1>
[ 6.681852] md: bind<sdi1>
[ 6.685906] md/raid1:md125: active with 2 out of 2 mirrors
[ 6.686221] md: bind<sde1>
[ 6.694288] md125: detected capacity change from 0 to 499972440064
[ 6.697903] md: bind<sdk1>
[ 6.707702] md: bind<sdg1>
[ 6.789676] md: bind<sdf1>
[ 6.864048] raid6: sse2x1 7299 MB/s
[ 6.932065] raid6: sse2x2 8507 MB/s
[ 7.000052] raid6: sse2x4 9334 MB/s
[ 7.003883] raid6: using algorithm sse2x4 (9334 MB/s)
[ 7.009030] raid6: using ssse3x2 recovery algorithm
[ 7.016950] xor: measuring software checksum speed
[ 7.060033] prefetch64-sse: 12476.000 MB/sec
[ 7.104097] generic_sse: 11050.000 MB/sec
[ 7.108414] xor: using function: prefetch64-sse (12476.000 MB/sec)
[ 7.115066] async_tx: api initialized (async)
[ 7.120852] md: raid6 personality registered for level 6
[ 7.126224] md: raid5 personality registered for level 5
[ 7.131583] md: raid4 personality registered for level 4
[ 7.137118] md/raid:md126: device sdf1 operational as raid disk 2
[ 7.143266] md/raid:md126: device sdg1 operational as raid disk 3
[ 7.149407] md/raid:md126: device sdk1 operational as raid disk 6
[ 7.155550] md/raid:md126: device sde1 operational as raid disk 1
[ 7.161693] md/raid:md126: device sdd1 operational as raid disk 0
[ 7.167836] md/raid:md126: device sdh1 operational as raid disk 4
[ 7.173979] md/raid:md126: device sdl1 operational as raid disk 5
[ 7.180538] md/raid:md126: allocated 0kB
[ 7.184619] md/raid:md126: raid level 6 active with 7 out of 7
devices, algorithm 2
On Wed, Apr 15, 2015 at 10:16 PM, James Bottomley
<James.Bottomley@xxxxxxxxxxxxxxxxxxxxx> wrote:
> On Tue, 2015-04-14 at 14:41 -0700, Adam Talbot wrote:
>> Removing the sas expander and attaching the SATA drives directly works
>> just fine. I had to limp along with the drives direct attached for a
>> while, while debugging.
>
> Well, that narrows it down. It looks like there's a longstanding bug in
> mvs_task_prep_ata() where the physical PHY field is populated by taking
> an index through the HBA phy table. This field is ignored for STP but
> the phy table is too small and it uses the expander phy number to index
> it (hence the GPF as we fall off the end of the phy table trying to
> dereference sas_phy->id).
>
> This should fix the problem.
>
> James
>
> ---
>
> diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
> index 2d5ab6d..454536c 100644
> --- a/drivers/scsi/mvsas/mv_sas.c
> +++ b/drivers/scsi/mvsas/mv_sas.c
> @@ -441,14 +441,11 @@ static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
> static int mvs_task_prep_ata(struct mvs_info *mvi,
> struct mvs_task_exec_info *tei)
> {
> - struct sas_ha_struct *sha = mvi->sas;
> struct sas_task *task = tei->task;
> struct domain_device *dev = task->dev;
> struct mvs_device *mvi_dev = dev->lldd_dev;
> struct mvs_cmd_hdr *hdr = tei->hdr;
> struct asd_sas_port *sas_port = dev->port;
> - struct sas_phy *sphy = dev->phy;
> - struct asd_sas_phy *sas_phy = sha->sas_phy[sphy->number];
> struct mvs_slot_info *slot;
> void *buf_prd;
> u32 tag = tei->tag, hdr_tag;
> @@ -468,7 +465,7 @@ static int mvs_task_prep_ata(struct mvs_info *mvi,
> slot->tx = mvi->tx_prod;
> del_q = TXQ_MODE_I | tag |
> (TXQ_CMD_STP << TXQ_CMD_SHIFT) |
> - (MVS_PHY_ID << TXQ_PHY_SHIFT) |
> + ((sas_port->phy_mask & TXQ_PHY_MASK) << TXQ_PHY_SHIFT) |
> (mvi_dev->taskfileset << TXQ_SRS_SHIFT);
> mvi->tx[mvi->tx_prod] = cpu_to_le32(del_q);
>
>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
