From: Stephen Cameron <stephenmcameron@xxxxxxxxx>
Cache the ioaccel handle so that when we need to abort commands sent
down the ioaccel2 path, we can look up the LUN ID in h->dev[] instead of
having to do I/O to the controller.
Add a field to elements in h->dev[] to keep track of how the device is exposed
to the SCSI mid layer: Not at all, without an upper level driver
(no_uld_attach) or normally exposed.
Since masked physical devices are now present in h->dev[] array
it would be perfectly possible to do
echo scsi add-single-device 2 2 0 0 > /proc/scsi/scsi
and bring them online. This was previously not allowed for masked
physical devices.
Ensure that the mapping of physical disks to logical drives gets updated in a
consistent way when a RAID migration occurs and is not touched until updates
to it are complete.
now instead of doing CISS_REPORT_PHYSICAL to get the LUNID for
the physical disk in hpsa_get_pdisk_of_ioaccel2(), just get
it out of h->dev[] where we already have it cached.
do not touch phys_disk[] for ioaccel enabled logical drives during rescan
Reviewed-by: Scott Teel <scott.teel@xxxxxxxx>
Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxx>
---
drivers/scsi/hpsa.c | 253 +++++++++++++++++++++++++----------------------
drivers/scsi/hpsa.h | 6 +
drivers/scsi/hpsa_cmd.h | 3 +
3 files changed, 141 insertions(+), 121 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index a1cfbd3..3417b8b 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -222,6 +222,7 @@ static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth);
static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
static int hpsa_eh_abort_handler(struct scsi_cmnd *scsicmd);
static int hpsa_slave_alloc(struct scsi_device *sdev);
+static int hpsa_slave_configure(struct scsi_device *sdev);
static void hpsa_slave_destroy(struct scsi_device *sdev);
static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno);
@@ -667,6 +668,9 @@ static struct device_attribute *hpsa_shost_attrs[] = {
NULL,
};
+#define HPSA_NRESERVED_CMDS (HPSA_CMDS_RESERVED_FOR_ABORTS + \
+ HPSA_CMDS_RESERVED_FOR_DRIVER + HPSA_MAX_CONCURRENT_PASSTHRUS)
+
static struct scsi_host_template hpsa_driver_template = {
.module = THIS_MODULE,
.name = HPSA,
@@ -681,6 +685,7 @@ static struct scsi_host_template hpsa_driver_template = {
.eh_device_reset_handler = hpsa_eh_device_reset_handler,
.ioctl = hpsa_ioctl,
.slave_alloc = hpsa_slave_alloc,
+ .slave_configure = hpsa_slave_configure,
.slave_destroy = hpsa_slave_destroy,
#ifdef CONFIG_COMPAT
.compat_ioctl = hpsa_compat_ioctl,
@@ -946,6 +951,8 @@ lun_assigned:
h->dev[n] = device;
h->ndevices++;
+ device->offload_to_be_enabled = device->offload_enabled;
+ device->offload_enabled = 0;
added[*nadded] = device;
(*nadded)++;
@@ -982,16 +989,20 @@ static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno,
*/
h->dev[entry]->raid_map = new_entry->raid_map;
h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
- wmb(); /* ensure raid map updated prior to ->offload_enabled */
}
h->dev[entry]->offload_config = new_entry->offload_config;
h->dev[entry]->offload_to_mirror = new_entry->offload_to_mirror;
- h->dev[entry]->offload_enabled = new_entry->offload_enabled;
h->dev[entry]->queue_depth = new_entry->queue_depth;
- dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d updated.\n",
- scsi_device_type(new_entry->devtype), hostno, new_entry->bus,
- new_entry->target, new_entry->lun);
+ /*
+ * We can turn off ioaccel offload now, but need to delay turning
+ * it on until we can update h->dev[entry]->phys_disk[], but we
+ * can't do that until all the devices are updated.
+ */
+ h->dev[entry]->offload_to_be_enabled = new_entry->offload_enabled;
+ if (!new_entry->offload_enabled)
+ h->dev[entry]->offload_enabled = 0;
+
}
/* Replace an entry from h->dev[] array. */
@@ -1014,6 +1025,8 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno,
new_entry->lun = h->dev[entry]->lun;
}
+ new_entry->offload_to_be_enabled = new_entry->offload_enabled;
+ new_entry->offload_enabled = 0;
h->dev[entry] = new_entry;
added[*nadded] = new_entry;
(*nadded)++;
@@ -1312,7 +1325,8 @@ static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h,
*/
if (!logical_drive->phys_disk[i]) {
logical_drive->offload_enabled = 0;
- logical_drive->queue_depth = h->nr_cmds;
+ logical_drive->offload_to_be_enabled = 0;
+ logical_drive->queue_depth = 8;
}
}
if (nraid_map_entries)
@@ -1335,6 +1349,16 @@ static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h,
continue;
if (!is_logical_dev_addr_mode(dev[i]->scsi3addr))
continue;
+
+ /*
+ * If offload is currently enabled, the RAID map and
+ * phys_disk[] assignment *better* not be changing
+ * and since it isn't changing, we do not need to
+ * update it.
+ */
+ if (dev[i]->offload_enabled)
+ continue;
+
hpsa_figure_phys_disk_ptrs(h, dev, ndevices, dev[i]);
}
}
@@ -1433,6 +1457,14 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
/* but if it does happen, we just ignore that device */
}
}
+ hpsa_update_log_drive_phys_drive_ptrs(h, h->dev, h->ndevices);
+
+ /* Now that h->dev[]->phys_disk[] is coherent, we can enable
+ * any logical drives that need it enabled.
+ */
+ for (i = 0; i < h->ndevices; i++)
+ h->dev[i]->offload_enabled = h->dev[i]->offload_to_be_enabled;
+
spin_unlock_irqrestore(&h->devlock, flags);
/* Monitor devices which are in one of several NOT READY states to be
@@ -1456,20 +1488,24 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
sh = h->scsi_host;
/* Notify scsi mid layer of any removed devices */
for (i = 0; i < nremoved; i++) {
- struct scsi_device *sdev =
- scsi_device_lookup(sh, removed[i]->bus,
- removed[i]->target, removed[i]->lun);
- if (sdev != NULL) {
- scsi_remove_device(sdev);
- scsi_device_put(sdev);
- } else {
- /* We don't expect to get here.
- * future cmds to this device will get selection
- * timeout as if the device was gone.
- */
- dev_warn(&h->pdev->dev, "didn't find c%db%dt%dl%d "
- " for removal.", hostno, removed[i]->bus,
- removed[i]->target, removed[i]->lun);
+ if (removed[i]->expose_state & HPSA_SCSI_ADD) {
+ struct scsi_device *sdev =
+ scsi_device_lookup(sh, removed[i]->bus,
+ removed[i]->target, removed[i]->lun);
+ if (sdev != NULL) {
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ } else {
+ /*
+ * We don't expect to get here.
+ * future cmds to this device will get selection
+ * timeout as if the device was gone.
+ */
+ dev_warn(&h->pdev->dev,
+ "didn't find c%db%dt%dl%d for removal.\n",
+ hostno, removed[i]->bus,
+ removed[i]->target, removed[i]->lun);
+ }
}
kfree(removed[i]);
removed[i] = NULL;
@@ -1477,6 +1513,8 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
/* Notify scsi mid layer of any added devices */
for (i = 0; i < nadded; i++) {
+ if (!(added[i]->expose_state & HPSA_SCSI_ADD))
+ continue;
if (scsi_add_device(sh, added[i]->bus,
added[i]->target, added[i]->lun) == 0)
continue;
@@ -1512,7 +1550,6 @@ static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h,
return NULL;
}
-/* link sdev->hostdata to our per-device structure. */
static int hpsa_slave_alloc(struct scsi_device *sdev)
{
struct hpsa_scsi_dev_t *sd;
@@ -1523,16 +1560,35 @@ static int hpsa_slave_alloc(struct scsi_device *sdev)
spin_lock_irqsave(&h->devlock, flags);
sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
sdev_id(sdev), sdev->lun);
- if (sd != NULL) {
- sdev->hostdata = sd;
- if (sd->queue_depth)
- scsi_change_queue_depth(sdev, sd->queue_depth);
+ if (likely(sd)) {
atomic_set(&sd->ioaccel_cmds_out, 0);
- }
+ sdev->hostdata = (sd->expose_state & HPSA_SCSI_ADD) ? sd : NULL;
+ } else
+ sdev->hostdata = NULL;
spin_unlock_irqrestore(&h->devlock, flags);
return 0;
}
+/* configure scsi device based on internal per-device structure */
+static int hpsa_slave_configure(struct scsi_device *sdev)
+{
+ struct hpsa_scsi_dev_t *sd;
+ int queue_depth;
+
+ sd = sdev->hostdata;
+ sdev->no_uld_attach = !sd || !(sd->expose_state & HPSA_ULD_ATTACH);
+
+ if (sd)
+ queue_depth = sd->queue_depth != 0 ?
+ sd->queue_depth : sdev->host->can_queue;
+ else
+ queue_depth = sdev->host->can_queue;
+
+ scsi_change_queue_depth(sdev, queue_depth);
+
+ return 0;
+}
+
static void hpsa_slave_destroy(struct scsi_device *sdev)
{
/* nothing to do. */
@@ -2438,6 +2494,7 @@ static void hpsa_get_ioaccel_status(struct ctlr_info *h,
this_device->offload_config = 0;
this_device->offload_enabled = 0;
+ this_device->offload_to_be_enabled = 0;
buf = kzalloc(64, GFP_KERNEL);
if (!buf)
@@ -2461,6 +2518,7 @@ static void hpsa_get_ioaccel_status(struct ctlr_info *h,
if (hpsa_get_raid_map(h, scsi3addr, this_device))
this_device->offload_enabled = 0;
}
+ this_device->offload_to_be_enabled = this_device->offload_enabled;
out:
kfree(buf);
return;
@@ -2708,6 +2766,7 @@ static int hpsa_update_device_info(struct ctlr_info *h,
this_device->raid_level = RAID_UNKNOWN;
this_device->offload_config = 0;
this_device->offload_enabled = 0;
+ this_device->offload_to_be_enabled = 0;
this_device->volume_offline = 0;
this_device->queue_depth = h->nr_cmds;
}
@@ -2850,88 +2909,23 @@ static int add_ext_target_dev(struct ctlr_info *h,
static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
struct CommandList *ioaccel2_cmd_to_abort, unsigned char *scsi3addr)
{
- struct ReportExtendedLUNdata *physicals = NULL;
- int responsesize = 24; /* size of physical extended response */
- int reportsize = sizeof(*physicals) + HPSA_MAX_PHYS_LUN * responsesize;
- u32 nphysicals = 0; /* number of reported physical devs */
- int found = 0; /* found match (1) or not (0) */
- u32 find; /* handle we need to match */
+ struct io_accel2_cmd *c2 =
+ &h->ioaccel2_cmd_pool[ioaccel2_cmd_to_abort->cmdindex];
+ unsigned long flags;
int i;
- struct scsi_cmnd *scmd; /* scsi command within request being aborted */
- struct hpsa_scsi_dev_t *d; /* device of request being aborted */
- struct io_accel2_cmd *c2a; /* ioaccel2 command to abort */
- __le32 it_nexus; /* 4 byte device handle for the ioaccel2 cmd */
- __le32 scsi_nexus; /* 4 byte device handle for the ioaccel2 cmd */
-
- if (ioaccel2_cmd_to_abort->cmd_type != CMD_IOACCEL2)
- return 0; /* no match */
-
- /* point to the ioaccel2 device handle */
- c2a = &h->ioaccel2_cmd_pool[ioaccel2_cmd_to_abort->cmdindex];
- if (c2a == NULL)
- return 0; /* no match */
-
- scmd = (struct scsi_cmnd *) ioaccel2_cmd_to_abort->scsi_cmd;
- if (scmd == NULL)
- return 0; /* no match */
-
- d = scmd->device->hostdata;
- if (d == NULL)
- return 0; /* no match */
-
- it_nexus = cpu_to_le32(d->ioaccel_handle);
- scsi_nexus = c2a->scsi_nexus;
- find = le32_to_cpu(c2a->scsi_nexus);
-
- if (h->raid_offload_debug > 0)
- dev_info(&h->pdev->dev,
- "%s: scsi_nexus:0x%08x device id: 0x%02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x\n",
- __func__, scsi_nexus,
- d->device_id[0], d->device_id[1], d->device_id[2],
- d->device_id[3], d->device_id[4], d->device_id[5],
- d->device_id[6], d->device_id[7], d->device_id[8],
- d->device_id[9], d->device_id[10], d->device_id[11],
- d->device_id[12], d->device_id[13], d->device_id[14],
- d->device_id[15]);
-
- /* Get the list of physical devices */
- physicals = kzalloc(reportsize, GFP_KERNEL);
- if (physicals == NULL)
- return 0;
- if (hpsa_scsi_do_report_phys_luns(h, physicals, reportsize)) {
- dev_err(&h->pdev->dev,
- "Can't lookup %s device handle: report physical LUNs failed.\n",
- "HP SSD Smart Path");
- kfree(physicals);
- return 0;
- }
- nphysicals = be32_to_cpu(*((__be32 *)physicals->LUNListLength)) /
- responsesize;
-
- /* find ioaccel2 handle in list of physicals: */
- for (i = 0; i < nphysicals; i++) {
- struct ext_report_lun_entry *entry = &physicals->LUN[i];
-
- /* handle is in bytes 28-31 of each lun */
- if (entry->ioaccel_handle != find)
- continue; /* didn't match */
- found = 1;
- memcpy(scsi3addr, entry->lunid, 8);
- if (h->raid_offload_debug > 0)
- dev_info(&h->pdev->dev,
- "%s: Searched h=0x%08x, Found h=0x%08x, scsiaddr 0x%8phN\n",
- __func__, find,
- entry->ioaccel_handle, scsi3addr);
- break; /* found it */
- }
-
- kfree(physicals);
- if (found)
- return 1;
- else
- return 0;
+ spin_lock_irqsave(&h->devlock, flags);
+ for (i = 0; i < h->ndevices; i++)
+ if (h->dev[i]->ioaccel_handle == le32_to_cpu(c2->scsi_nexus)) {
+ memcpy(scsi3addr, h->dev[i]->scsi3addr,
+ sizeof(h->dev[i]->scsi3addr));
+ spin_unlock_irqrestore(&h->devlock, flags);
+ return 1;
+ }
+ spin_unlock_irqrestore(&h->devlock, flags);
+ return 0;
}
+
/*
* Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev,
* logdev. The number of luns in physdev and logdev are returned in
@@ -3142,10 +3136,12 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
/* Figure out where the LUN ID info is coming from */
lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
i, nphysicals, nlogicals, physdev_list, logdev_list);
- /* skip masked physical devices. */
- if (lunaddrbytes[3] & 0xC0 &&
- i < nphysicals + (raid_ctlr_position == 0))
- continue;
+
+ /* skip masked non-disk devices */
+ if (MASKED_DEVICE(lunaddrbytes))
+ if (i < nphysicals + (raid_ctlr_position == 0) &&
+ NON_DISK_PHYS_DEV(lunaddrbytes))
+ continue;
/* Get device type, vendor, model, device id */
if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
@@ -3170,6 +3166,18 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
*this_device = *tmpdevice;
+ /* do not expose masked devices */
+ if (MASKED_DEVICE(lunaddrbytes) &&
+ i < nphysicals + (raid_ctlr_position == 0)) {
+ if (h->hba_mode_enabled)
+ dev_warn(&h->pdev->dev,
+ "Masked physical device detected\n");
+ this_device->expose_state = HPSA_DO_NOT_EXPOSE;
+ } else {
+ this_device->expose_state =
+ HPSA_SG_ATTACH | HPSA_ULD_ATTACH;
+ }
+
switch (this_device->devtype) {
case TYPE_ROM:
/* We don't *really* support actual CD-ROM devices,
@@ -3211,6 +3219,10 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
case TYPE_MEDIUM_CHANGER:
ncurrent++;
break;
+ case TYPE_ENCLOSURE:
+ if (h->hba_mode_enabled)
+ ncurrent++;
+ break;
case TYPE_RAID:
/* Only present the Smartarray HBA as a RAID controller.
* If it's a RAID controller other than the HBA itself
@@ -3227,7 +3239,6 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
if (ncurrent >= HPSA_MAX_DEVICES)
break;
}
- hpsa_update_log_drive_phys_drive_ptrs(h, currentsd, ncurrent);
adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent);
out:
kfree(tmpdevice);
@@ -4252,10 +4263,7 @@ static int hpsa_register_scsi(struct ctlr_info *h)
sh->max_cmd_len = MAX_COMMAND_SIZE;
sh->max_lun = HPSA_MAX_LUN;
sh->max_id = HPSA_MAX_LUN;
- sh->can_queue = h->nr_cmds -
- HPSA_CMDS_RESERVED_FOR_ABORTS -
- HPSA_CMDS_RESERVED_FOR_DRIVER -
- HPSA_MAX_CONCURRENT_PASSTHRUS;
+ sh->can_queue = h->nr_cmds - HPSA_NRESERVED_CMDS;
sh->cmd_per_lun = sh->can_queue;
sh->sg_tablesize = h->maxsgentries;
h->scsi_host = sh;
@@ -6097,18 +6105,21 @@ static int hpsa_find_cfgtables(struct ctlr_info *h)
static void hpsa_get_max_perf_mode_cmds(struct ctlr_info *h)
{
- h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+#define MIN_MAX_COMMANDS 16
+ BUILD_BUG_ON(MIN_MAX_COMMANDS <= HPSA_NRESERVED_CMDS);
+
+ h->max_commands = readl(&h->cfgtable->MaxPerformantModeCommands);
/* Limit commands in memory limited kdump scenario. */
if (reset_devices && h->max_commands > 32)
h->max_commands = 32;
- if (h->max_commands < 16) {
- dev_warn(&h->pdev->dev, "Controller reports "
- "max supported commands of %d, an obvious lie. "
- "Using 16. Ensure that firmware is up to date.\n",
- h->max_commands);
- h->max_commands = 16;
+ if (h->max_commands < MIN_MAX_COMMANDS) {
+ dev_warn(&h->pdev->dev,
+ "Controller reports max supported commands of %d Using %d instead. Ensure that firmware is up to date.\n",
+ h->max_commands,
+ MIN_MAX_COMMANDS);
+ h->max_commands = MIN_MAX_COMMANDS;
}
}
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 6577130..58f3315 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -54,6 +54,7 @@ struct hpsa_scsi_dev_t {
u32 ioaccel_handle;
int offload_config; /* I/O accel RAID offload configured */
int offload_enabled; /* I/O accel RAID offload enabled */
+ int offload_to_be_enabled;
int offload_to_mirror; /* Send next I/O accelerator RAID
* offload request to mirror drive
*/
@@ -68,6 +69,11 @@ struct hpsa_scsi_dev_t {
* devices in order to honor physical device queue depth limits.
*/
struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES];
+#define HPSA_DO_NOT_EXPOSE 0x0
+#define HPSA_SG_ATTACH 0x1
+#define HPSA_ULD_ATTACH 0x2
+#define HPSA_SCSI_ADD (HPSA_SG_ATTACH | HPSA_ULD_ATTACH)
+ u8 expose_state;
};
struct reply_queue_buffer {
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 3a621c7..76d5499 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -240,6 +240,7 @@ struct ReportLUNdata {
struct ext_report_lun_entry {
u8 lunid[8];
+#define MASKED_DEVICE(x) ((x)[3] & 0xC0)
#define GET_BMIC_BUS(lunid) ((lunid)[7] & 0x3F)
#define GET_BMIC_LEVEL_TWO_TARGET(lunid) ((lunid)[6])
#define GET_BMIC_DRIVE_NUMBER(lunid) (((GET_BMIC_BUS((lunid)) - 1) << 8) + \
@@ -247,6 +248,8 @@ struct ext_report_lun_entry {
u8 wwid[8];
u8 device_type;
u8 device_flags;
+#define NON_DISK_PHYS_DEV(x) ((x)[17] & 0x01)
+#define PHYS_IOACCEL(x) ((x)[17] & 0x08)
u8 lun_count; /* multi-lun device, how many luns */
u8 redundant_paths;
u32 ioaccel_handle; /* ioaccel1 only uses lower 16 bits */
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
