From: Nicholas Bellinger <nab@xxxxxxxxxxxxxxx>
This patch updates standard INQUIRY, INQUIRY EVPD=0x86, READ_CAPACITY_16
and control mode pages to use se_sess->sess_prot_type when determing which
type of T10-PI related feature bits can be exposed.
This is required for fabric sessions supporting T10-PI metadata to
backend devices that don't have protection enabled.
Cc: Martin Petersen <martin.petersen@xxxxxxxxxx>
Cc: Sagi Grimberg <sagig@xxxxxxxxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
Cc: Doug Gilbert <dgilbert@xxxxxxxxxxxx>
Signed-off-by: Nicholas Bellinger <nab@xxxxxxxxxxxxxxx>
---
drivers/target/target_core_sbc.c | 13 +++++++++++--
drivers/target/target_core_spc.c | 14 +++++++++-----
2 files changed, 20 insertions(+), 7 deletions(-)
diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index 5b3564a..68373c9 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -93,6 +93,8 @@ sbc_emulate_readcapacity_16(struct se_cmd *cmd)
{
struct se_device *dev = cmd->se_dev;
struct se_session *sess = cmd->se_sess;
+ int pi_prot_type = dev->dev_attrib.pi_prot_type;
+
unsigned char *rbuf;
unsigned char buf[32];
unsigned long long blocks = dev->transport->get_blocks(dev);
@@ -114,8 +116,15 @@ sbc_emulate_readcapacity_16(struct se_cmd *cmd)
* Set P_TYPE and PROT_EN bits for DIF support
*/
if (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) {
- if (dev->dev_attrib.pi_prot_type)
- buf[12] = (dev->dev_attrib.pi_prot_type - 1) << 1 | 0x1;
+ /*
+ * Only override a device's pi_prot_type if no T10-PI is
+ * available, and sess_prot_type has been explicitly enabled.
+ */
+ if (!pi_prot_type)
+ pi_prot_type = sess->sess_prot_type;
+
+ if (pi_prot_type)
+ buf[12] = (pi_prot_type - 1) << 1 | 0x1;
}
if (dev->transport->get_lbppbe)
diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c
index 460e931..5b6a0af 100644
--- a/drivers/target/target_core_spc.c
+++ b/drivers/target/target_core_spc.c
@@ -103,10 +103,12 @@ spc_emulate_inquiry_std(struct se_cmd *cmd, unsigned char *buf)
buf[5] |= 0x8;
/*
* Set Protection (PROTECT) bit when DIF has been enabled on the
- * device, and the transport supports VERIFY + PASS.
+ * device, and the fabric supports VERIFY + PASS. Also report
+ * PROTECT=1 if sess_prot_type has been configured to allow T10-PI
+ * to unprotected devices.
*/
if (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) {
- if (dev->dev_attrib.pi_prot_type)
+ if (dev->dev_attrib.pi_prot_type || cmd->se_sess->sess_prot_type)
buf[5] |= 0x1;
}
@@ -480,9 +482,11 @@ spc_emulate_evpd_86(struct se_cmd *cmd, unsigned char *buf)
* only for TYPE3 protection.
*/
if (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) {
- if (dev->dev_attrib.pi_prot_type == TARGET_DIF_TYPE1_PROT)
+ if (dev->dev_attrib.pi_prot_type == TARGET_DIF_TYPE1_PROT ||
+ cmd->se_sess->sess_prot_type == TARGET_DIF_TYPE1_PROT)
buf[4] = 0x5;
- else if (dev->dev_attrib.pi_prot_type == TARGET_DIF_TYPE3_PROT)
+ else if (dev->dev_attrib.pi_prot_type == TARGET_DIF_TYPE3_PROT ||
+ cmd->se_sess->sess_prot_type == TARGET_DIF_TYPE3_PROT)
buf[4] = 0x4;
}
@@ -874,7 +878,7 @@ static int spc_modesense_control(struct se_cmd *cmd, u8 pc, u8 *p)
* TAG field.
*/
if (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) {
- if (dev->dev_attrib.pi_prot_type)
+ if (dev->dev_attrib.pi_prot_type || sess->sess_prot_type)
p[5] |= 0x80;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
