this regression is getting old, but it's still present in the newest
Linus kernels.
I have a HP server with a P411 card with a MSL G3 48 slot tape changer
attached. the tape changer has two LTO5 and one LTO6 tape drives
installed. one of the cables is an "octopus", well "quadpus", but
changing what's connected with a "proper" cable and two of the quadpus
doesn't seem to make any difference. there is no other equipment (e.g.,
disks) attached to this card.
on Linux 3.14 this works fine, but on anything newer one of the tape
drives and the changer itself goes missing. see attachments of boot
messages from each case.
I've gone through a bisect from v3.14 to v3.15-rc1, and ended up at this
commit:
: [root@dump2-osl1 ~/src/linux]; git bisect good
283b4a9b98b192ebc0e15351fd6fb60e1be78c5d is the first bad commit
commit 283b4a9b98b192ebc0e15351fd6fb60e1be78c5d
Author: Stephen M. Cameron <scameron@xxxxxxxxxxxxxxxxxx>
Date: Tue Feb 18 13:55:33 2014 -0600
[SCSI] hpsa: add ioaccell mode 1 RAID offload support.
This enables sending i/o's destined for RAID logical drives
which can be serviced by a single physical disk down a different,
faster i/o path directly to physical drives for certain logical
volumes on SSDs bypassing the Smart Array RAID stack for a
performance improvement.
Signed-off-by: Matt Gates <matthew.gates@xxxxxx>
Signed-off-by: Stephen M. Cameron <scameron@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Scott Teel <scott.teel@xxxxxx>
Signed-off-by: Mike Miller <michael.miller@xxxxxxxxxxxxx>
Signed-off-by: Don Brace <brace@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Joe Handzik <joseph.t.handzik@xxxxxx>
Signed-off-by: James Bottomley <JBottomley@xxxxxxxxxxxxx>
:040000 040000 2883c53c791ca8add0c8fd743027bb3c65a293b7
224b5b082268720c62f0da340017111fe6b03eb2 M drivers
it there any more information I can provide?
--
thanks,
Kjetil T. Homme
Redpill Linpro - Changing the game
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14.0-rc3-bisect (root@xxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #16 SMP Thu Feb 19 17:00:01 CET 2015 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14.0-rc3-bisect root=/dev/mapper/sysvg-root ro rootdelay=360 console=tty1 console=ttyS1,115200n8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009a800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df62efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df62f000-0x00000000df63bfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000df63c000-0x00000000df63cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df63d000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081fffefff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x81ffff max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdf63d max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_map[mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x81fc00000-0x81fdfffff] [ 0.000000] init_memory_mapping: [mem 0x81c000000-0x81fbfffff] [ 0.000000] init_memory_mapping: [mem 0x800000000-0x81bffffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdf62efff] [ 0.000000] init_memory_mapping: [mem 0xdf63c000-0xdf63cfff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff] [ 0.000000] init_memory_mapping: [mem 0x81fe00000-0x81fffefff] [ 0.000000] RAMDISK: [mem 0x3690e000-0x37feffff] [ 0.000000] ACPI: RSDP 00000000000f4f00 000024 (v02 HP ) [ 0.000000] ACPI: XSDT 00000000df630340 0000BC (v01 HP ProLiant 00000002 Ò? 0000162E) [ 0.000000] ACPI: FACP 00000000df630440 0000F4 (v03 HP ProLiant 00000002 Ò? 0000162E) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131218/tbfadt-684) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20131218/tbfadt-684) [ 0.000000] ACPI: DSDT 00000000df630540 0020BD (v01 HP DSDT 00000001 INTL 20030228) [ 0.000000] ACPI: FACS 00000000df62f100 000040 [ 0.000000] ACPI: SPCR 00000000df62f140 000050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E) [ 0.000000] ACPI: MCFG 00000000df62f1c0 00003C (v01 HP ProLiant 00000001 00000000) [ 0.000000] ACPI: HPET 00000000df62f200 000038 (v01 HP ProLiant 00000002 Ò? 0000162E) [ 0.000000] ACPI: FFFF 00000000df62f240 000064 (v02 HP ProLiant 00000002 Ò? 0000162E) [ 0.000000] ACPI: SPMI 00000000df62f2c0 000040 (v05 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: ERST 00000000df62f300 0001D0 (v01 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: APIC 00000000df62f500 00015E (v01 HP ProLiant 00000002 00000000) [ 0.000000] ACPI: SRAT 00000000df62f680 000570 (v01 HP Proliant 00000001 Ò? 0000162E) [ 0.000000] ACPI: FFFF 000f62fc00 000176 (v01 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: BERT 00000000df62fd80 000030 (v01 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: HEST 00000000df62fdc0 0000BC (v01 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: FFFF 00000000df62fe80 000494 (v01 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: SSDT 00000000df632600 000125 (v03 HP CRSPCI0 00000002 HP 00000001) [ 0.000000] ACPI: SSDT 00000000df632740 000255 (v03 HP riser1a 00000002 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000df6329c0 00025D (v03 HP riser2a 00000002 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000df632c40 0003BB (v01 HP pcc 00000001 INTL 20090625) [ 0.000000] ACPI: SSDT 00000000df633000 000377 (v01 HP pmab 00000001 INTL 20090625) [ 0.000000] ACPI: SSDT 00000000df633380 004104 (v01 INTEL PPM RCM 00000001 INTL 20061109) [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04de 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x21 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x22 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x23 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x24 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x25 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x30 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x31 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x32 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x33 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x34 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x35 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0xdfffffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x41fffffff] [ 0.000000] Sode 1 PXM 1 [mem 0x420000000-0x81fffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem 0x100000000-0x41fffffff] -> [mem 0x00000000-0x41fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41fffffff] [ 0.000000] NODE_DATA [mem 0x41fffb000-0x41fffffff] [ 0.000000] Initmem setup node 1 [mem 0x420000000-0x81fffefff] [ 0.000000] NODE_DATA [mem 0x81fffa000-0x81fffefff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x81fffefff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00099fff] [ 0.000000] node 0: [mem 0x00100000-0xdf62efff] [ 0.000000] node 0: [mem 0xdf63c000-0xdf63cfff] [ 0.000000] node 0: [mem 0x100000000-0x41fffffff] [ 0.000000] node 1: [mem 0x420000000-0x81fffefff] [ 0.000000] ACPI: PM-TO Port: 0x908 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x16] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x1bled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24 0.000000] IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 32 CPUs, 8 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf62f000-0xdf63bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf63d000-0xe3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfee0ffff] [ 0.000000] PM: Registered noemory: [mem 0xfee10000-0xff7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] e820: [mem 0xe4000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88040fc00000 s86528 r8192 d24064 u131072 [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 8254938 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14.0-rc3-bisect root=/dev/mapper/sysvg-root ro rootdelay=360 console=tty1 console=ttyS1,115200n8 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 32909776K/33543968K available (7583K kernel code, 1089K rwdata, 3520K rodata, 1348K init, 1428K bss, 634192K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle graiod acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-31. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 [ 0.000000] NR_IRQS:16640 nr_irqs:1344 16 [ 0.000000] ACPI: Core revision 20131218 [ 0.000000] ACPI: All ACPI Tables successfully acquired [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty1] enabled [ 0.000000] console [ttyS1] enabled [ 0.000000] allocated 134217728 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2666.050 MHz processor [ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.10 BogoMIPS (lpj=10664200) [ 0.005184] pid_max: default: 32768 minimum: 301 [ 0.007458] Security Framework initialized [ 0.009617] AppArmor: AppArmor initialized [ 0.011778] Yama: becoming mindful. [ 0.015666] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.026029] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.032606] Mount-cache hash table entries: 256 [ 0.035116] Initializing cgroup subsys memory [ 0.037249] Initializing cgroup subsys devices [ 0.039504] Initializing cgroup subsys freezer [ 0.041662] Initializing cgroup subsys net_cls [ 0.044000] Initializing cgroup subsys blkio [ 0.046076] Initializing cgroup subsys perf_event [ 0.048501] Initializing cgroup subsys net_prio [ 0.050731] Initializing cgroup subsys hugetlb [ 0.052913] CPU: Physical Processor ID: 0 [ 0.054885] CPU: Processor Core ID: 0 [ 0.056687] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.056687] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.063100] mce: CPU supports 9 MCE banks [ 0.065069] CPU0: Thermal monitoring enabled ( [ 0.159351] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.159351] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.159351] tlb_flushall_shift: 6 [ 0.174849] Freeing SMP alternatives memory: 28K (ffffffff81e63000 - ffffffff81e6a000) [ 0.179785] ftrace: allocating 28567 entries in 112 pages [ 0.195065] Switched APIC routing to physical flat. [ 0.197990] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.240717] smpboot: CPU0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz (fam: 06, model: 2c, stepping: 02) [ 0.351924] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Broken BIOS detected, complain to your hardware vendor. [ 0.357847] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330) [ 0.361630] Intel PMU driver. [ 0.363103] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.366552] ... version: 3 [ 0.368544] ... bit width: 48 [ 0.370588] ... generic registers: 4 [ 0.372510] ... value mask: 0000ffffffffffff [ 0.375075] ... max period: 000000007fffffff [ 0.377612] ... fixed-purpose events: 3 [ 0.379820] ... event mask: 000000070000000f [ 0.384552] x86: Booting SMP configuration: [ 0.386671] .... node #1, CPUs: #1 [ 0.498544] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.502703] [ 0.503491] .... node #0, CPUs: #2 [ 0.518772] .... node #1, CPUs: #3 [ 0.533998] .... node #0, CPUs: #4 [ 0.549364] .... node #1, CPUs: #5 [ 0.564642] .... node #0, CPUs: #6 [ 0.579918] .... node #1, CPUs: #7 [ 0.595166] .... node #0, CPUs: #8 [ 0.610635] .... node #1, CPUs: #9 [ 0.625868] .... node #0, CPUs: #10 [ 0.641207] .... node #1, CPUs: #11 [ 0.656463] .... node #0, CPUs: #12 [ 0.671830] .... node #1, CPUs: #13 [ 0.687299] .... node #0, CPUs: #14 [ 0.702808] .... node #1, CPUs: #15 [ 0.718157] .... node #0, CPUs: #16 [ 0.733549] .... node #1, CPUs: #17 [ 0.748789] .... node #0, CPUs: #18 [ 0.764231] .... node #1, CPUs: #19 [ 0.779738] .... node #0, CPUs: #20 [ 0.795120] .... node #1, CPUs: #21 [ 0.810726] .... node #0, CPUs: #22 [ 0.826194] .... node #1, CPUs: #23 [ 0.841384] x86: Booted up 2 nodes, 24 CPUs [ 0.843911] smpboot: Total of 24 processors activated (127966.68 BogoMIPS) [ 0.876207] devtmpfs: initialized [ 0.884493] EVM: security.selinux [ 0.886178] EVM: security.SMACK64 [ 0.887846] EVM: security.ima [ 0.889421] EVM: security.capability [ 0.892289] pinctrl core: initialized pinctrl subsystem [ 0.895230] regulator-dummy: no parameters [ 0.897300] RTC time: 17:16:39, date: 02/19/15 [ 0.899659] NET: Registered protocol family 16 [ 0.901988] cpuidle: using governor ladder [ 0.904135] cpuidle: using governor menu [ 0.906135] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.910066] ACPI: bus type PCI registered [ 0.912038] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.915194] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.919759] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.926611] PCI: Using configuration type 1 for base access [ 0.929486] PCI: HP ProLiant DL380 detected, enabling pci=bfsort. [ 0.934535] bio: create slab <bio-0> at 0 [ 0.936866] ACPI: Added _OSI(Module Device) [ 0.939059] ACPI: Added _OSI(Processor Device) [ 0.941432] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.943715] ACPI: Added _OSI(Processor Aggregator Device) [ 0.950596] ACPI: Interpreter enabled [ 0.952536] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) [ 0.957288] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 0.961957] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580) [ 0.966512] ACPI: (supports S0 S4 S5) [ 0.968334] ACPI: Using IOAPIC for interrupt routing [ 0.970712] HEST: Table parsing has been initialized. [ 0.973334] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.977751] ACPI: No dock devices found. [ 0.984567] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-0e]) [ 0.987628] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.991818] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.995014] acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff]; [mem 0xfed00000-0xfed03fff] ignored [ 1.000774] PCI host bridge to bus 0000:00 [ 1.002820] pci_bus 0000:00: root bus resource [bus 00-0e] [ 1.005653] pci_bus 0000:00: root bus resource [mem 0xe7000000-0xfbffffff] [ 1.009037] pci_bus 0000:00: root bus resource [io 0x1000-0x7fff] [ 1.012003] pci_bus 0000:00: root bus resource [io 0x0000-0x03a [ 1.114985] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] [ 1.118213] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff] [ 1.121239] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff] [ 1.124529] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb] [ 1.127519] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df] [ 1.130586] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.145733] pci 0000:00:01.0: PCI bridge to [bus 05] [ 1.148602] pci 0000:00:02.0: PCI bridge to [bus 06] [ 1.157728] pci 0000:00:03.0: PCI bridge to [bus 0b] [ 1.160418] pci 0000:00:04.0: PCI bridge to [bus 0c] [ 1.169724] pci 0000:00:05.0: PCI bridge to [bus 0d] [ 1.172465] pci 0000:00:06.0: PCI bridge to [bus 0e] [ 1.175061] pci 0000:00:07.0: PCI bridge to [bus 0a] [ 1.185719] pci 0000:00:08.0: PCI bridge to [bus 09] [ 1.193716] pci 0000:00:09.0: PCI bridge to [bus 08] [ 1.196470] pci 0000:00:0a.0: PCI bridge to [bus 07] [ 1.205716] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 1.208437] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 1.217716] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 1.220606] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode) [ 1.224301] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11) [ 1.227657] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) [ 1.231242] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled. [ 1.235351] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. [ 1.239362] ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11) [ 1.242587] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled. [ 1.246666] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) [ 1.249976] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11) [ 1.253571] vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none [ 1.257601] vgaarb: loaded [ 1.259053] vgaarb: bridge control possible 0000:01:03.0 [ 1.262163] SCSI subsystem initialized [ 1.264175] ACPI: bus type USB registered [ 1.266197] usbcore: registered new interface driver usbfs [ 1.270565] usbcore: registered new interface driver hub [ 1.273304] usbcore: registered new device driver usb [ 1.276033] PCI: Using ACPI for IRQ routing [ 1.279577] PCI: Discovered peer bus 3e [ 1.281598] PCI host bridge to bus 0000:3e [ 1.283597] pci_bus 0000:3e: root bus resource [io 0x0000-0xffff] [ 1.286574] pci_bus 0000:3e: t bus resource [mem 0x00000000-0xffffffffff] [ 1.390137] pci_bus 0000:3e: No busn resource found for root bus, will use [bus 3e-ff] [ 1.395563] PCI: Discovered peer bus 3f [ 1.397570] PCI host bridge to bus 0000:3f [ 1.399802] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff] [ 1.402806] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xffffffffff] [ 1.406374] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff] [ 1.412314] NetLabel: Initializing [ 1.414021] NetLabel: domain hash size = 128 [ 1.416175] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.418709] NetLabel: unlabeled traffic allowed by default [ 1.421747] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 1.424854] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 1.429760] Switched to clocksource hpet [ 1.441367] AppArmor: AppArmor Filesystem Enabled [ 1.443740] pnp: PnP ACPI init [ 1.445299] ACPI: bus type PNP registered [ 1.447649] system 00:00: [io 0x0408-0x040f] has been reserved [ 1.450611] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 1.453640] system 00:00: [io 0x0700-0x071f] has been reserved [ 1.456490] system 00:00: [io 0x088008ff] has been reserved [ 1.559431] system 00:00: [io 0x0900-0x097f] has been reserved [ 1.562317] system 00:00: [io 0x0cd4-0x0cd7] has been reserved [ 1.565379] system 00:00: [io 0x0cd0-0x0cd3] has been reserved [ 1.568355] system 00:00: [io 0x0f50-0x0f58] has been reserved [ 1.571228] system 00:00: [io 0x0ca0-0x0ca1] has been reserved [ 1.574053] system 00:00: [io 0x0ca4-0x0ca5] has been reserved [ 1.576902] system 00:00: [io 0x02f8-0x02ff] has been reserved [ 1.579851] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved [ 1.583224] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved [ 1.587253] pnp: PnP ACPI: found 9 devices [ 1.589429] ACPI: bus type PNP unregistered [ 1.598957] pci 0000:00:01.0: BAR 15: assigned [mem 0xe7000000-0xe70fffff pref] [ 1.602568] pci 0000:00:03.0: BAR 15: assigned [mem 0xe7100000-0xe71fffff pref] [ 1.606149] pci 0000:00:05.0: BAR 15: assigned [mem 0xe7200000-0xe72fffff pref] [ 1.609753] pci 0000:00:08.0: BAR 15: assigned [mem 0xe7300000-0xe73fffff pref] [ 1.613466] pci 0000:00:09.0: BAR 15: assigned [mem 0xe7400000-0xe74fffff pref] [ 1.616975] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe7500000-0xe75fffff pref] [ 1.620591] pci 0000:00:1c.4: BAR 15: assigned [mem 0xe7600000-0xe76fffff pref] [ 1.624123] pci 0000:05:00.0: BAR 6: igned [mem 0xe7000000-0xe707ffff pref] [ 1.727580] pci 0000:00:01.0: PCI bridge to [bus 05] [ 1.730067] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 1.733031] pci 0000:00:01.0: bridge window [mem 0xfb300000-0xfb5fffff] [ 1.736276] pci 0000:00:01.0: bridge window [mem 0xe7000000-0xe70fffff pref] [ 1.739846] pci 0000:00:02.0: PCI bridge to [bus 06] [ 1.742454] pci 0000:0b:00.0: BAR 6: assigned [mem 0xe7100000-0xe717ffff pref] [ 1.745921] pci 0000:00:03.0: PCI bridge to [bus 0b] [ 1.748421] pci 0000:00:03.0: bridge window [mem 0xfba00000-0xfbbfffff] [ 1.751666] pci 0000:00:03.0: bridge window [mem 0xe7100000-0xe71fffff pref] [ 1.755146] pci 0000:00:04.0: PCI bridge to [bus 0c] [ 1.757794] pci 0000:0d:00.0: BAR 6: assigned [mem 0xe7200000-0xe727ffff pref] [ 1.761298] pci 0000:00:05.0: PCI bridge to [bus 0d] [ 1.763700] pci 0000:00:05.0: bridge windoio 0x7000-0x7fff] [ 1.866756] pci 0000:00:05.0: bridge window [mem 0xfbd00000-0xfbffffff] [ 1.870739] pci 0000:00:05.0: bridge window [mem 0xe7200000-0xe72fffff pref] [ 1.874256] pci 0000:00:06.0: PCI bridge to [bus 0e] [ 1.876661] pci 0000:00:07.0: PCI bridge to [bus 0a] [ 1.879202] pci 0000:09:00.0: BAR 6: assigned [mem 0xe7300000-0xe737ffff pref] [ 1.882667] pci 0000:00:08.0: PCI bridge to [bus 09] [ 1.885282] pci 0000:00:08.0: bridge window [io 0x6000-0x6fff] [ 1.888340] pci 0000:00:08.0: bridge window [mem 0xfb700000-0xfb9fffff] [ 1.891622] pci 0000:00:08.0: bridge window [mem 0xe7300000-0xe73fffff pref] [ 1.895126] pci 0000:08:00.0: BAR 6: assigned [mem 0xe7400000-0xe740ffff pref] [ 1.898685] pci 0000:00:09.0: PCI bridge to [bus 08] [ 1.901262] pci 0000:00:09.0: bridge window [io 0x5000-0x5fff] [ 1.904188] pci 0000:00:09.0: bridge window [mem 0xfb600000-0xfb6fffff] [ 1.907432] pci 0000:00:09.0: bridge window [mem 0xe7400000-0xe74fffff pref] [ 1.910988] pci 0000:00:0a.0: PCI bridge to [bus 07] [ 1.913384] pci 0000:03:00.0: BAR 6: assigned [mem 0xe7500000-0xe750ffff pref] [ 1.917034] pci 0000:03:00.1: BAR 6: assigned [mem 0xe7510000-0xe751ffff pref] [ 1.920584] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 1.923147] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf9ffffff] [ 1.926376] pci 0000:00:1c.0: bridge dow [mem 0xe7500000-0xe75fffff pref] [ 2.030163] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 2.032587] pci 0000:02:00.2: BAR 6: assigned [mem 0xe7600000-0xe760ffff pref] [ 2.036081] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 2.038595] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 2.041540] pci 0000:00:1c.4: bridge window [mem 0xf5d00000-0xf5ffffff] [ 2.044956] pci 0000:00:1c.4: bridge window [mem 0xe7600000-0xe76fffff pref] [ 2.048673] pci 0000:01:03.0: BAR 6: assigned [mem 0xf5c00000-0xf5c1ffff pref] [ 2.052167] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 2.054740] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 2.057750] pci 0000:00:1e.0: bridge window [mem 0xf5c00000-0xf5cfffff] [ 2.061216] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref] [ 2.065117] NET: Registered protocol family 2 [ 2.067560] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 2.071588] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.075068] TCP: Hash tables configured (established 262144 bind 65536) [ 2.078560] TCP: reno registered [ 2.080381] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 2.083512] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 2.087128] NET: Registered protocol family 1 [ 2.105934] Trying to unpack rootfs image as initramfs... [ 2.499906] Freeing initrd memory: 23432K (ffff88003690e000 - ffff880037ff0000) [ 2.503492] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.506665] software IO TLB [mem 0xdb62f000-0xdf62f000] (64MB) mapped at [ffff8800db62f000-ffff8800df62efff] [ 2.512415] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x1a [ 2.515358] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x1a [ 2.518278] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x1a [ 2.521103] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x1a [ 2.523919] microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x1a [ 2.526755] microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x1a [ 2.529654] microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x1a [ 2.532447] microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x1a [ 2.535263] microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x1a [ 2.538167] microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x1a [ 2.540989] microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x1a [ 2.543909] microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x1a [ 2.546922] microcode: CPU12 sig=0x206c2, pf=0x1, revision=0x1a [ 2.550054] microcode: CPU13 sig=0x206c2, pf=0x1, revision=0x1a [ 2.552921] microcode: CPU14 sig=0x206c2, pf=0x1, revision=0x1a [ 2.555798] microcode: CPU15 sig=0x206c2, pf=0x1, revision=0x1a [ 2.558754] microcode: CPU16 sig=0x206c2, pf=0x1, revision=0x1a [ 2.561622] microcode: CPU17 sig=0x206c2, pf=0x1, revision=0x1a [ 2.564442] microcode: CPU18 sig=0x206c2, pf=0x1, revision=0x1a [ 2.567303] microcode: CPU19 sig=0x206c2, pf=0x1, revision=0x1a [ 2.570184] microcode: CPU20 sig=0x206c2, pf=0x1, revision=0x1a [ 2.573090] microcode: CPU21 sig=0x206c2, pf=0x1, revision=0x1a [ 2.575940] microcode: CPU22 sig=0x206c2, pf=0x1, revision=0x1a [ 2.578886] microcode: CPU23 sig=0x206c2, pf=0x1, revision=0x1a [ 2.581825] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 2.586219] Scanning for low memory corruption eve60 seconds [ 2.689872] futex hash table entries: 8192 (order: 7, 524288 bytes) [ 2.693072] Initialise system trusted keyring [ 2.695304] audit: initializing netlink subsys (disabled) [ 2.698238] audit: type=2000 audit(1424366199.348:1): initialized [ 2.726877] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.731535] zbud: loaded [ 2.733032] VFS: Disk quotas dquot_6.5.2 [ 2.735061] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.738919] fuse init (API version 7.22) [ 2.740970] msgmni has been set to 32768 [ 2.743116] Key type big_key registered [ 2.745459] Key type asymmetric registered [ 2.747589] Asymmetric key parser 'x509' registered [ 2.749983] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.753627] io scheduler noop registered [ 2.755559] io scheduler deadline registered (default) [ 2.758151] io scheduler cfq registered [ 2.760947] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.763860] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.768020] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.773256] ACPI: Power Button [PWRF] [ 2.775762] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.778666] ACPI: Thermal Zone [THM0] (8 C) [ 2.780738] ERST: Failed to get Error Log Address Range. [ 2.783354] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 2.787016] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.810652] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.834654] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.840063] Linux agpgart interface v0.103 [ 2.843958] brd: module loaded [ 2.846513] loop: module loaded [ 2.848416] libphy: Fixed MDIO Bus: probed [ 2.850479] tun: Universal TUN/TAP device driver, 1.6 [ 2.852924] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 2.855977] PPP generic driver version 2.4.2 [ 2.858266] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.861562] ehci-pci: EHCI PCI platform driver [ 2.863843] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 2.866427] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.870109] ehci-pci 0000:00:1d.7: debug port 1 [ 2.876216] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf5bf0000 [ 2.889338] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.892300] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.895598] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.899162] usb usb1: Product: EHCI Host Controller [ 2.901574] usb usb1: Manufacturer: Linux 3.14.0-rc3-bisect ehci_hcd [ 2.904623] usb usb1: SerialNumber: 0000:00:1d.7 [ 907011] hub 1-0:1.0: USB hub found [ 3.008871] hub 1-0:1.0: 8 ports detected [ 3.011024] ehci-platform: EHCI generic platform driver [ 3.013774] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.016781] ohci-pci: OHCI PCI platform driver [ 3.019070] ohci-platform: OHCI generic platform driver [ 3.021608] uhci_hcd: USB Universal Host Controller Interface driver [ 3.024769] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.027349] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.030861] uhci_hcd 0000:00:1d.0: detected 2 ports [ 3.033235] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001000 [ 3.036052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.039596] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.043070] usb usb2: Product: UHCI Host Controller [ 3.045469] usb usb2: Manufacturer: Linux 3.14.0-rc3-bisect uhci_hcd [ 3.048855] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.051236] hub 2-0:1.0: USB hub found [ 3.053122] hub 2-0:1.0: 2 ports detected [ 3.055268] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.057935] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.061513] uhci_hcd 0000:00:1d.1: detected 2 ports [ 3.063879] uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001020 [ 3.066695] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.074] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.173781] usb usb3: Product: UHCI Host Controller [ 3.176160] usb usb3: Manufacturer: Linux 3.14.0-rc3-bisect uhci_hcd [ 3.179384] usb usb3: SerialNumber: 0000:00:1d.1 [ 3.182139] hub 3-0:1.0: USB hub found [ 3.184043] hub 3-0:1.0: 2 ports detected [ 3.186336] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.188993] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.192584] uhci_hcd 0000:00:1d.2: detected 2 ports [ 3.194981] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001040 [ 3.197948] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.201216] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.204678] usb usb4: Product: UHCI Host Controller [ 3.207081] usb usb4: Manufacturer: Linux 3.14.0-rc3-bisect uhci_hcd [ 3.210174] usb usb4: SerialNumber: 0000:00:1d.2 [ 3.212727] hub 4-0:1.0: USB hub found [ 3.214681] hub 4-0:1.0: 2 ports detected [ 3.217097] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.219681] uhci_hcd 0000:00:1d.3: new USB bus registered, assed bus number 5 [ 3.323260] uhci_hcd 0000:00:1d.3: detected 2 ports [ 3.325781] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001060 [ 3.328817] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.332089] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.335586] usb usb5: Product: UHCI Host Controller [ 3.338076] usb usb5: Manufacturer: Linux 3.14.0-rc3-bisect uhci_hcd [ 3.341128] usb usb5: SerialNumber: 0000:00:1d.3 [ 3.343764] hub 5-0:1.0: USB hub found [ 3.345674] hub 5-0:1.0: 2 ports detected [ 3.347952] uhci_hcd 0000:02:00.4: UHCI Host Controller [ 3.350524] uhci_hcd 0000:02:00.4: new USB bus registered, assigned bus number 6 [ 3.354083] uhci_hcd 0000:02:00.4: detected 8 ports [ 3.356680] uhci_hcd 0000:02:00.4: port count misdetected? forcing to 2 ports [ 3.360218] uhci_hcd 0000:02:00.4: irq 17, io base 0x00003c00 [ 3.363064] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.366721] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.370673] usb usb6: Product: UHCI Host Controller [ 3.373349] usb usb6: Manufacturer: Linux 3.14.0-rc3-bisect uhci_hcd [ 3.376749] usb usb6: SerialNumber: 0000:02:00.4 [ 3.379613] hub 6-0:1.0: USB hub found [ 3.381727] hub 6-0:1.0: 2 ports detected [ 3.384143] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1, [ 3.490629] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.493534] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.496558] mousedev: PS/2 mouse device common for all mice [ 3.500169] rtc_cmos 00:08: RTC can wake from S4 [ 3.503070] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 3.506494] rtc_cmos 00:08: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 3.509231] tsc: Refined TSC clocksource calibration: 2665.908 MHz [ 3.514090] device-mapper: uevent: version 1.0.3 [ 3.516931] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx [ 3.521667] ledtrig-cpu: registered to indicate activity on CPUs [ 3.525074] TCP: cubic registered [ 3.527376] NET: Registered protocol family 10 [ 3.530067] NET: Registered protocol family 17 [ 3.532907] Key type dns_resolver registered [ 3.537083] Loading compiled-in X.509 certificates [ 3.541203] Loaded X.509 cert 'Magrathea: Glacier signing key: 6178ea801789398e678a82f7db973567470f5846' [ 3.546775] registered taskstats version 1 [ 32614] Key type trusted registered [ 3.658180] Key type encrypted registered [ 3.663899] AppArmor: AppArmor sha1 policy hashing enabled [ 3.667602] IMA: No TPM chip found, activating TPM-bypass! [ 3.672145] Magic number: 3:924:289 [ 3.674320] tty tty22: hash matches [ 3.676314] memory memory151: hash matches [ 3.679999] rtc_cmos 00:08: setting system clock to 2015-02-19 17:16:42 UTC (1424366202) [ 3.692650] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.695945] EDD information not available. [ 3.702589] Freeing unused kernel memory: 1348K (ffffffff81d12000 - ffffffff81e63000) [ 3.745594] Write protecting the kernel read-only data: 12288k [ 3.784213] Freeing unused kernel memory: 596K (ffff88000176b000 - ffff880001800000) [ 3.832763] Freeing unused kernel memory: 576K (ffff880001b70000 - ffff880001c00000) Loading, please wait... [ 3.894802] udevd[283]: starting version 175 [ 3.943398] HP HPSA Driver (v 3.4.0-1) [ 3.964117] hpsa 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.005226] hpsa 0000:05:00.0: MSIX [ 4.027831] Adaptec aacraid driver 1.2-0[30300]-ms [ 4.044682] hpsa 0000:05:00.0: hpsa0: <0x323a> at IRQ 67 using DAC [ 4.065930] scsi0 : hpsa [ 4.066028] hpsa 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.066084] hpsa 0000:09:00.0: MSIX [ 4.069972] hpsa 0000:05:00.0: RAID device c0b3t0l0 added. [ 4.069974] hpsa 0000:05:00.0: Direct-Access device c0b0t0l0 added. [ 4.069975] hpsa 0000:05:00.0: Direct-Access device c0b0t0l1 added. [ 4.069977] hpsa 0000:05:00.0: Direct-Access device c0b0t0l3 added. [ 4.070247] scsi 0:3:0:0: RAID HP P410i 6.60 PQ: 0 ANSI: 5 [ 4.070478] scsi 0:0:0:0: Direct-Access HP LOGICAL VOLUME 6.60 PQ: 0 ANSI: 5 [ 4.070704] scsi 0:0:0:1: Direct-Access HP LOGICAL VOLUME 6.60 PQ: 0 ANSI: 5 [ 4.070934] scsi 0:0:0:3: Direct-Access HP LOGICAL VOLUME 6.60 PQ: 0 ANSI: 5 [ 4.071110] scsi 0:3:0:0: Attached scsi generic sg0 type 12 [ 4.071402] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 4.071578] sd 0:0:0:0: [sda] 286677120 512-byte logical blocks: (146 GB/136 GiB) [ 4.071652] sd 0:0:0:1: Attached scsi generic sg2 type 0 [ 4.071794] sd 0:0:0:1: [sdb] 4688229296 512-byte logical blocks: (2.40 TB/2.18 TiB) [ 4.071925] sd 0:0:0:3: Attached scsi generic sg3 type 0 [ 4.072021] sd 0:0:0:0: [sda] Write Protect is off [ 4.072173] sd 0:0:0:1: [sdb] Write Protect is off [ 4.072228] sd 0:0:0:3: [sdc] 976707632 512-byte logical blocks: (500 GB/465 GiB) [ 4.072285] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.072451] sd 0:0:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.072674] sd 0:0:0:3: [sdc] Write Protect is off [ 4.073049] sd 0:0:0:3: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.078222] sdc: unknown partition table [ 4.079153] sd 0:0:0:3: [sdc] Attached SCSI disk [ 4.081943] sdb: unknown partition table [ 4.082810] sd 0:0:0:1: [sdb] Attached SCSI disk [ 4.086282] hpsa 0000:09:00.0: hpsa1: <0x323a> at IRQ 75 using DAC [ 4.087230] sda: sda1 [ 4.088215] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.097098] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 4.107248] scsi1 : hpsa [ 4.107317] hpsa 0000:0d:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.107371] hpsa 0000:0d:00.0: MSIX [ 4.118708] hpsa 0000:09:00.0: RAID device c1b3t0l0 added. [ 4.118709] hpsa 0000:09:00.0: Direct-Access device c1b0t0l0 added. [ 4.118711] hpsa 0000:09:00.0: Direct-Access device c1b0t0l1 added. [ 4.118712] hpsa 0000:09:00.0: Direct-Access device c1b0t0l2 added. [ 4.119085] scsi 1:3:0:0: RAID HP P411 6.60 PQ: 0 ANSI: 5 [ 4.119362] scsi 1:0:0:0: Direct-Access HP LOGICAL VOLUME 6.60 PQ: 0 ANSI: 5 [ 4.119653] scsi 1:0:0:1: Direct-Access HP LOGICAL VOLUME 6.60 PQ: 0 ANSI: 5 [ 4.119883] scsi 1:0:0:2: Direct-Access HP LOGICAL VOLUME 6.60 PQ: 0 ANSI: 5 [ 4.120049] scsi 1:3:0:0: Attached scsi generic sg4 type 12 [ 4.120415] sd 1:0:0:0: Attached scsi generic sg5 type 0 [ 4.120609] sd 1:0:0:0: [sdd] 46883734448 512-byte logical blocks: (24.0 TB/21.8 TiB) [ 4.120763] sd 1:0:0:1: Attached scsi generic sg6 type 0 [ 4.120914] sd 1:0:0:1: [sde] 46883734448 512-byte logical blocks: (24.0 TB/21.8 TiB) [ 4.121113] sd 1:0:0:2: Attached scsi generic sg7 type 0 [ 4.121125] sd 1:0:0:0: [sdd] Write Protect is off [ 4.121332] sd 1:0:0:2: [sdf] 46883734448 512-byte logical blocks: (24.0 TB/21.8 TiB) [ 4.121381] sd 1:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.121453] sd 1:0:0:1: [sde] Write Protect is off [ 4.121671] sd 1:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.121798] sd 1:0:0:2: [sdf] Write Protect is off [ 4.122074] sd 1:0:0:2: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.127529] hpsa 0000:0d:00.0: hpsa2: <0x323a> at IRQ 83 using DAC [ 4.128887] sdd: unknown partition table [ 4.130418] sdf: unknown partition table [ 4.130439] sde: unknown partition table [ 4.130783] sd 1:0:0:0: [sdd] Attached SCSI disk [ 4.131274] sd 1:0:0:2: [sdf] Attached SCSI disk [ 4.131326] sd 1:0:0:1: [sde] Attached SCSI disk [ 4.148409] scsi2 : hpsa [ 4.156483] hpsa 0000:0d:00.0: RAID device c2b3t0l0 added. [ 4.156485] hpsa 0000:0d:00.0: Sequential-Access device c2b2t0l0 added. [ 4.156486] hpsa 0000:0d:00.0: Sequential-Access device c2b2t1l0 added. [ 4.156488] hpsa 0000:0d:00.0: Medium Changer device c2b2t1l1 added. [ 4.156489] hpsa 0000:0d:00.0: Sequential-Access device c2b2t2l0 added. [ 4.156782] scsi 2:3:0:0: RAID HP P411 6.60 PQ: 0 ANSI: 5 [ 4.157602] scsi 2:2:0:0: Sequential-Access HP Ultrium 6-SCSI 32AW PQ: 0 ANSI: 6 [ 4.158564] scsi 2:2:1:0: Sequential-Access HP Ultrium 5-SCSI Z58W PQ: 0 ANSI: 6 [ 4.160118] scsi 2:2:1:1: Medium Changer HP MSL G3 Series 8.10 PQ: 0 ANSI: 5 [ 4.161163] scsi 2:2:2:0: Sequential-Access HP Ultrium 5-SCSI Z58W PQ: 0 ANSI: 6 [ 4.161345] scsi 2:3:0:0: Attached scsi generic sg8 type 12 [ 4.161593] scsi 2:2:0:0: Attached scsi generic sg9 type 1 [ 4.161834] scsi 2:2:1:0: Attached scsi generic sg10 type 1 [ 4.162053] scsi 2:2:1:1: Attached scsi generic sg11 type 8 [ 4.162268] scsi 2:2:2:0: Attached scsi generic sg12 type 1 [ 4.279825] random: lvm urandom read with 80 bits of entropy available [ 4.292618] usb 4-1: New USB device found, idVendor=1781, idProduct=0c31 [ 4.292620] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.292622] usb 4-1: Product: TellStick Duo [ 4.292623] usb 4-1: Manufacturer: Telldus [ 4.292625] usb 4-1: SerialNumber: AE01DHGO [ 4.365006] random: nonblocking pool is initialized [ 4.537028] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 4.717466] usb 5-1: New USB device found, idVendor=0624, idProduct=0294 [ 4.717468] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.717469] usb 5-1: Product: Dell 03R874 [ 4.717470] usb 5-1: Manufacturer: Avocent [ 4.856860] usb 6-1: new full-speed USB device number 2 using uhci_hcd [ 5.002249] usb 6-1: New USB device found, idVendor=03f0, idProduct=7029 [ 5.002251] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.002252] usb 6-1: Product: Virtual Keyboard [ 5.002253] usb 6-1: Manufacturer: HP [ 7.400607] aacraid 0000:0b:00.0: can't disable ASPM; OS doesn't have ASPM control [ 7.445714] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.5 (December 20, 2013) [ 7.495046] Switched to clocksource tsc [ 7.495079] [drm] Initialized drm 1.1.0 20060810 [ 7.495892] bnx2 0000:03:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 16, node addr b4:99:ba:b2:48:4e [ 7.496651] bnx2 0000:03:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 17, node addr b4:99:ba:b2:48:50 [ 7.508254] Floppy drive(s): fd0 is 1.44M [ 7.716543] AAC0: kernel 5.2-0[17757] Jun 9 2010 [ 7.742737] AAC0: monitor 5.2-0[17757] [ 7.764017] AAC0: bios 5.2-0[17757] [ 7.784175] AAC0: serial 00835EC0188 [ 7.804934] AAC0: Non-DASD support enabled. [ 7.829142] AAC0: 64bit support enabled. [ 7.851768] AAC0: 64 Bit DAC enabled [ 7.852668] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 7.852669] SCSI Media Changer driver v0.25 [ 7.853149] st 2:2:0:0: Attached scsi tape st0 [ 7.853150] st 2:2:0:0: st0: try direct i/o: yes (alignment 4 B) [ 7.991327] hpsa 0000:0d:00.0: hpsa2: a power on or device reset detected [ 7.991340] hidraw: raw HID events driver (C) Jiri Kosina [ 8.058701] ahci 0000:08:00.0: controller can do FBS, turning on CAP_FBS [ 8.059611] ch0: type #1 (mt): 0x0+1 [medium transport] [ 8.059612] ch0: type #2 (st): 0x3e9+48 [storage] [ 8.059613] ch0: type #3 (ie): 0x65+0 [import/export] [ 8.059614] ch0: type #4 (dt): 0x1+4 [data transfer] [ 8.060200] bio: create slab <bio-1> at 1 [ 8.077474] scsi3 : aacraid [ 8.077684] scsi 3:0:0:0: Direct-Access Sun ld0 V1.0 PQ: 0 ANSI: 2 [ 8.077869] scsi 3:0:1:0: Direct-Access Sun ld 1027qaj005 V1.0 PQ: 0 ANSI: 2 [ 8.092010] scsi 3:1:0:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 8.093522] scsi 3:1:1:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 8.095039] scsi 3:1:2:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 8.096605] scsi 3:1:3:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 8.098168] scsi 3:1:4:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 8.099737] scsi 3:1:5:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 8.101301] scsi 3:1:6:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 8.102870] scsi 3:1:7:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 8.104688] scsi 3:1:8:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 8.106506] scsi 3:1:9:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 8.108080] scsi 3:1:10:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 8.109639] scsi 3:1:11:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 8.111744] scsi 3:1:13:0: Direct-Access SEAGATE ST31000N SU15 PQ: 0 ANSI: 5 [ 8.123265] ch0: dt 0x1: ch0: ID/LUN unknown [ 8.150110] scsi 3:1:14:0: Direct-Access SEAGATE ST31000N SU15 PQ: 0 ANSI: 5 [ 8.152268] scsi 3:1:16:0: Direct-Access SEAGATE ST31000N SU15 PQ: 0 ANSI: 5 [ 8.154035] scsi 3:1:17:0: Direct-Access SEAGATE ST31000N SU15 PQ: 0 ANSI: 5 [ 8.156094] scsi 3:1:18:0: Direct-Access SEAGATE ST31000N SU15 PQ: 0 ANSI: 5 [ 8.157849] scsi 3:1:19:0: Direct-Access SEAGATE ST31000N SU15 PQ: 0 ANSI: 5 [ 8.158815] scsi 3:1:20:0: Direct-Access HITACHI HUA7210S AC5A PQ: 0 ANSI: 5 [ 8.160570] scsi 3:1:21:0: Direct-Access SEAGATE ST31000N SU15 PQ: 0 ANSI: 5 [ 8.161528] scsi 3:1:22:0: Direct-Access HITACHI HUA7210S AC5A PQ: 0 ANSI: 5 [ 8.162928] ch0: dt 0x2: ch0: ID/LUN unknown [ 8.197111] ch0: dt 0x3: ch0: ID/LUN unknown [ 8.211064] scsi 3:3:0:0: Enclosure SUN Storage J4200 3A53 PQ: 0 ANSI: 5 [ 8.219851] scsi 3:3:1:0: Enclosure SUN Storage J4200 3A53 PQ: 0 ANSI: 5 [ 8.231532] ch0: dt 0x4: ch0: ID 5, LUN 0, ch0: Huh? device not found! [ 8.231533] ch0: INITIALIZE ELEMENT STATUS, may take some time ... [ 8.248504] sd 3:0:0:0: [sdg] Very big device. Trying to use READ CAPACITY(16). [ 8.248525] sd 3:0:0:0: [sdg] 15619502080 512-byte logical blocks: (7.99 TB/7.27 TiB) [ 8.248560] sd 3:0:0:0: Attached scsi generic sg13 type 0 [ 8.248561] sd 3:0:0:0: [sdg] Write Protect is off [ 8.248597] sd 3:0:0:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 8.248734] sd 3:0:1:0: [sdh] Very big device. Trying to use READ CAPACITY(16). [ 8.248761] sd 3:0:0:0: [sdg] Very big device. Trying to use READ CAPACITY(16). [ 8.248762] sd 3:0:1:0: [sdh] 31205601280 512-byte logical blocks: (15.9 TB/14.5 TiB) [ 8.248777] sd 3:0:1:0: Attached scsi generic sg14 type 0 [ 8.248782] sd 3:0:1:0: [sdh] Write Protect is off [ 8.248822] sd 3:0:1:0: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 8.248955] sd 3:0:1:0: [sdh] Very big device. Trying to use READ CAPACITY(16). [ 8.248957] scsi 3:1:0:0: Attached scsi generic sg15 type 0 [ 8.249128] scsi 3:1:1:0: Attached scsi generic sg16 type 0 [ 8.249244] sdh: unknown partition table [ 8.249255] scsi 3:1:2:0: Attached scsi generic sg17 type 0 [ 8.249281] sdg: unknown partition table [ 8.249329] sd 3:0:1:0: [sdh] Very big device. Trying to use READ CAPACITY(16). [ 8.249380] sd 3:0:0:0: [sdg] Very big device. Trying to use READ CAPACITY(16). [ 8.249415] scsi 3:1:3:0: Attached scsi generic sg18 type 0 [ 8.249436] sd 3:0:0:0: [sdg] Attached SCSI removable disk [ 8.249464] sd 3:0:1:0: [sdh] Attached SCSI removable disk [ 8.249588] scsi 3:1:4:0: Attached scsi generic sg19 type 0 [ 8.249729] scsi 3:1:5:0: Attached scsi generic sg20 type 0 [ 8.249842] scsi 3:1:6:0: Attached scsi generic sg21 type 0 [ 8.250003] scsi 3:1:7:0: Attached scsi generic sg22 type 0 [ 8.250173] scsi 3:1:8:0: Attached scsi generic sg23 type 0 [ 8.250383] scsi 3:1:9:0: Attached scsi generic sg24 type 0 [ 8.250536] scsi 3:1:10:0: Attached scsi generic sg25 type 0 [ 8.250692] scsi 3:1:11:0: Attached scsi generic sg26 type 0 [ 8.250890] scsi 3:1:13:0: Attached scsi generic sg27 type 0 [ 8.251090] scsi 3:1:14:0: Attached scsi generic sg28 type 0 [ 8.251255] scsi 3:1:16:0: Attached scsi generic sg29 type 0 [ 8.251460] scsi 3:1:17:0: Attached scsi generic sg30 type 0 [ 8.251659] scsi 3:1:18:0: Attached scsi generic sg31 type 0 [ 8.251866] scsi 3:1:19:0: Attached scsi generic sg32 type 0 [ 8.252047] scsi 3:1:20:0: Attached scsi generic sg33 type 0 [ 8.252207] scsi 3:1:21:0: Attached scsi generic sg34 type 0 [ 8.252346] scsi 3:1:22:0: Attached scsi generic sg35 type 0 [ 8.252503] scsi 3:3:0:0: Attached scsi generic sg36 type 13 [ 8.252696] scsi 3:3:1:0: Attached scsi generic sg37 type 13 [ 8.253008] ch0: ... finished [ 8.253010] ch 2:2:1:1: Attached scsi changer ch0 [ 8.253632] st 2:2:1:0: Attached scsi tape st1 [ 8.253633] st 2:2:1:0: st1: try direct i/o: yes (alignment 4 B) [ 8.253878] st 2:2:2:0: Attached scsi tape st2 [ 8.253879] st 2:2:2:0: st2: try direct i/o: yes (alignment 4 B) [ 10.527290] floppy0: no floppy controllers found [ 10.527300] work still pending [ 11.155066] ahci 0000:08:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 11.201084] ahci 0000:08:00.0: flags: 64bit ncq fbs pio [ 11.231356] scsi4 : ahci [ 11.246532] scsi5 : ahci [ 11.260663] scsi6 : ahci [ 11.274923] scsi7 : ahci [ 11.288868] scsi8 : ahci [ 11.303010] scsi9 : ahci [ 11.317986] scsi10 : ahci [ 11.326833] usbcore: registered new interface driver usbhid [ 11.326834] usbhid: USB HID core driver [ 11.388960] scsi11 : ahci [ 11.404031] ata1: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0100 irq 91 [ 11.446616] ata2: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0180 irq 91 [ 11.488516] ata3: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0200 irq 91 [ 11.529610] ata4: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0280 irq 91 [ 11.570554] osst :I: Tape driver with OnStream support version 0.99.4 [ 11.570554] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 11.570560] ata5: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0300 irq 91 [ 11.570562] ata6: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0380 irq 91 [ 11.570563] ata7: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0400 irq 91 [ 11.570566] ata8: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0480 irq 91 [ 11.807371] [drm] radeon kernel modesetting enabled. [ 11.836319] [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB). [ 11.882378] [drm] register mmio base: 0xF5CF0000 [ 11.882579] input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:0624:0294.0001/input/input3 [ 11.882726] hid-generic 0003:0624:0294.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1d.3-1/input0 [ 11.882936] input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:0624:0294.0002/input/input4 [ 11.886564] hid-generic 0003:0624:0294.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1d.3-1/input1 [ 11.886718] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:02:00.4/usb6/6-1/6-1:1.0/0003:03F0:7029.0003/input/input5 [ 11.898889] hid-generic 0003:03F0:7029.0003: input,hidraw2: USB HID v1.01 Keyboard [HP Virtual Keyboard ] on usb-0000:02:00.4-1/input0 [ 11.899007] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:02:00.4/usb6/6-1/6-1:1.1/0003:03F0:7029.0004/input/input6 [ 11.899125] hid-generic 0003:03F0:7029.0004: input,hidraw3: USB HID v1.01 Mouse [HP Virtual Keyboard ] on usb-0000:02:00.4-1/input1 [ 12.190765] ata2: SATA link down (SStatus 0 SControl 300) [ 12.206733] ata4: SATA link down (SStatus 0 SControl 300) [ 12.206749] ata5: SATA link down (SStatus 0 SControl 300) [ 12.206765] ata7: SATA link down (SStatus 0 SControl 300) [ 12.206782] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 12.230686] ata3: SATA link down (SStatus 0 SControl 300) [ 12.321183] ata8.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 [ 12.321383] ata8.00: configured for UDMA/66 [ 12.358681] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 12.358832] ata1.00: ATA-8: ROG RAIDR Express PCIe SSD, MV.R00-0, max UDMA7 [ 12.358834] ata1.00: 468555520 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 12.359006] ata1.00: configured for UDMA/133 [ 12.362886] scsi 4:0:0:0: Direct-Access ATA ROG RAIDR Expres MV.R PQ: 0 ANSI: 5 [ 12.363052] sd 4:0:0:0: [sdi] 468555520 512-byte logical blocks: (239 GB/223 GiB) [ 12.363530] sd 4:0:0:0: [sdi] Write Protect is off [ 12.363684] sd 4:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.366553] sdi: unknown partition table [ 12.367214] sd 4:0:0:0: [sdi] Attached SCSI disk [ 12.410667] ata6: SATA link down (SStatus 0 SControl 300) [ 13.074651] [drm] register mmio size: 65536 [ 13.101624] radeon 0000:01:03.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (64M used) [ 13.150075] radeon 0000:01:03.0: GTT: 512M 0x00000000C8000000 - 0x00000000E7FFFFFF [ 13.193018] [drm] Detected VRAM RAM=128M, BAR=128M [ 13.220525] [drm] RAM width 16bits DDR [ 13.243232] [TTM] Zone kernel: Available graphics memory: 16467878 kiB [ 13.244092] SSE version of gcm_enc/dec engaged. [ 13.305958] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 13.342986] [TTM] Initializing pool allocator [ 13.367969] [TTM] Initializing DMA pool allocator [ 13.394974] [drm] radeon: 64M of VRAM memory ready [ 13.422549] [drm] radeon: 512M of GTT memory ready. [ 13.450407] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 13.506677] [drm] PCI GART of 512M enabled (table at 0x0000000036980000). [ 13.545089] radeon 0000:01:03.0: WB disabled [ 13.568454] radeon 0000:01:03.0: fence driver on ring 0 use gpu addr 0x00000000c8000000 and cpu addr 0xffff880037ab4000 [ 13.629528] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 13.666778] [drm] Driver supports precise vblank timestamp query. [ 13.701480] [drm] radeon: irq initialized. [ 13.724457] [drm] Loading R100 Microcode [ 13.746624] [drm] radeon: ring at 0x00000000C8001000 [ 13.775230] [drm] ring test succeeded in 1 usecs [ 14.298210] [drm] ib test succeeded in 0 usecs [ 14.323555] [drm] No TV DAC info found in BIOS [ 14.348786] [drm] Radeon Display Connectors [ 14.371407] [drm] Connector 0: [ 14.388754] [drm] VGA-1 [ 14.404065] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 14.438475] [drm] Encoders: [ 14.455494] [drm] CRT1: INTERNAL_DAC1 [ 14.478367] [drm] Connector 1: [ 14.496009] [drm] VGA-2 [ 14.511022] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c [ 14.545116] [drm] Encoders: [ 14.561095] [drm] CRT2: INTERNAL_DAC2 [ 14.626696] [drm] fb mappable at 0xE8040000 [ 14.649798] [drm] vram apper at 0xE8000000 [ 14.673193] [drm] size 786432 [ 14.689840] [drm] fb depth is 8 [ 14.707125] [drm] pitch is 1024 [ 14.725330] fbcon: radeondrmfb (fb0) is primary device [ 14.883133] Console: switching to colour frame buffer device 128x48 [ 14.955340] radeon 0000:01:03.0: fb0: radeondrmfb frame buffer device [ 14.991561] radeon 0000:01:03.0: registered panic notifier [ 15.021595] [drm] Initialized radeon 2.37.0 20080528 for 0000:01:03.0 on minor 0 [ 22.596920] ses 3:3:0:0: Attached Enclosure device [ 22.597123] sd 4:0:0:0: Attached scsi generic sg38 type 0 [ 22.651502] ses 3:3:1:0: Attached Enclosure device [ 22.678414] scsi 11:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5 [ 22.723195] scsi 11:0:0:0: Attached scsi generic sg39 type 3 [ 40.533704] bio: create slab <bio-2> at 2 udevd[412]: timeout: killing 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [613] udevd[412]: 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [613] terminated by signal 9 (Killed) udevd[413]: timeout: killing 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [616] udevd[414]: timeout: killing 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [617] udevd[413]: 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [616] terminated by signal 9 (Killed) udevd[414]: 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [617] terminated by signal 9 (Killed) udevd[415]: timeout: killing 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [655] udevd[415]: 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [655] terminated by signal 9 (Killed) udevd[420]: timeout: killing 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [654] udevd[420]: 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [654] terminated by signal 9 (Killed) udevd[299]: timeout: killing 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [657] udevd[299]: 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [657] terminated by signal 9 (Killed) [ 70.323425] device-mapper: table: 252:7: snapshot: Snapshot cow pairing for exception table handover failed [ 70.375851] device-mapper: ioctl: error adding target to table [ 70.411504] device-mapper: table: 252:7: snapshot: Snapshot cow pairing for exception table handover failed [ 70.467469] device-mapper: ioctl: error adding target to table Begin: Loading essential drivers ... [ 71.629958] md: linear personality registered for level -1 [ 71.669798] md: multipath personality registered for level -4 [ 71.712659] md: raid0 personality registered for level 0 [ 71.780896] md: raid1 personality registered for level 1 [ 71.818592] async_tx: api initialized (async) [ 71.853996] xor: measuring software checksum speed [ 71.917720] prefetch64-sse: 11265.000 MB/sec [ 71.981701] generic_sse: 9846.000 MB/sec [ 72.006021] xor: using function: prefetch64-sse (11265.000 MB/sec) [ 72.125691] raid6: sse2x1 6594 MB/s [ 72.213662] raid6: sse2x2 7691 MB/s [ 72.301636] raid6: sse2x4 8468 MB/s [ 72.325779] raid6: using algorithm sse2x4 (8468 MB/s) [ 72.357323] raid6: using ssse3x2 recovery algorithm [ 72.477233] md: raid6 personality registered for level 6 [ 72.509818] md: raid5 personality registered for level 5 [ 72.542868] md: raid4 personality registered for level 4 [ 72.626368] md: raid10 personality registered for level 10
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.15.0-rc1-bisect (root@xxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #3 SMP Tue Feb 17 18:03:42 CET 2015 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.15.0-rc1-bisect root=/dev/mapper/sysvg-root ro rootdelay=360 console=tty1 console=ttyS1,115200n8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009a800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df62efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df62f000-0x00000000df63bfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000df63c000-0x00000000df63cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df63d000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081fffefff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x81ffff max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdf63d max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mappmem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x81fc00000-0x81fdfffff] [ 0.000000] init_memory_mapping: [mem 0x81c000000-0x81fbfffff] [ 0.000000] init_memory_mapping: [mem 0x800000000-0x81bffffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdf62efff] [ 0.000000] init_memory_mapping: [mem 0xdf63c000-0xdf63cfff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff] [ 0.000000] init_memory_mapping: [mem 0x81fe00000-0x81fffefff] [ 0.000000] RAMDISK: [mem 0x368f2000-0x37feffff] [ 0.000000] ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP ) [ 0.000000] ACPI: XSDT 0x00000000DF630340 0000BC (v01 HP ProLiant 00000002 Ò? 0000162E) [ 0.000000] ACPI: FACP 0x00000000DF630440 0000F4 (v03 HP ProLiant 00000002 Ò? 0000162E) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20140214/tbfadt-684) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20140214/tbfadt-684) [ 0.000000] ACPI: DSDT 0x00000000DF630540 0020BD (v01 HP DSDT 00000001 INTL 20030228) [ 0.000000] ACPI: FACS 0x00000000DF62F100 000040 [ 0.000000] ACPI: SPCR 0x00000000DF62F140 000050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E) [ 0.000000] ACPI: MCFG 0x00000000DF62F1C0 00003C (v01 HP ProLiant 00000001 00000000) [ 0.000000] ACPI: HPET 0x0000000200 000038 (v01 HP ProLiant 00000002 Ò? 0000162E) [ 0.000000] ACPI: FFFF 0x00000000DF62F240 000064 (v02 HP ProLiant 00000002 Ò? 0000162E) [ 0.000000] ACPI: SPMI 0x00000000DF62F2C0 000040 (v05 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: ERST 0x00000000DF62F300 0001D0 (v01 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: APIC 0x00000000DF62F500 00015E (v01 HP ProLiant 00000002 00000000) [ 0.000000] ACPI: SRAT 0x00000000DF62F680 000570 (v01 HP Proliant 00000001 Ò? 0000162E) [ 0.000000] ACPI: FFFF 0x00000000DF62FC00 000176 (v01 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: BERT 0x00000000DF62FD80 000030 (v01 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: HEST 0x00000000DF62FDC0 0000BC (v01 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: FFFF 0x00000000DF62FE80 000494 (v01 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: SSDT 0x00000000DF632600 000125 (v03 HP CRSPCI0 00000002 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000DF632740 00025 HP riser1a 00000002 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DF6329C0 00025D (v03 HP riser2a 00000002 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DF632C40 0003BB (v01 HP pcc 00000001 INTL 20090625) [ 0.000000] ACPI: SSDT 0x00000000DF633000 000377 (v01 HP pmab 00000001 INTL 20090625) [ 0.000000] ACPI: SSDT 0x00000000DF633380 004104 (v01 INTEL PPM RCM 00000001 INTL 20061109) [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 1 [ 0.000000] SRAT: PXM 1 -> A21 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x22 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x23 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x24 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x25 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x30 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x31 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x32 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x33 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x34 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x35 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0xdfffffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x41fffffff] [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x420000000-0x81fffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem 0x100000000-0x41fffffff] -> [mem 0x00000000-0x41fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41fffffff] [ 0.000000] NODE_DATA [mem 0x41fffb000-0x41fffffff] [ 0.000000] Initmem setup node 1 [mem 0x420000000-0x81fffefff] [ 0.000000] NODE_DATA [mem 0x81fffa000-0x81ff [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x81fffefff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00099fff] [ 0.000000] node 0: [mem 0x00100000-0xdf62efff] [ 0.000000] node 0: [mem 0xdf63c000-0xdf63cfff] [ 0.000000] node 0: [mem 0x100000000-0x41fffffff] [ 0.000000] node 1: [mem 0x420000000-0x81fffefff] [ 0.000000] ACPI: PM-Timer IO Port: 0x908 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x0bled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x16] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled) [ 0.000000] ACPI: Lacpi_id[0x1b] lapic_id[0x33] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 32 CPUs, 8 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf62f000-0xdf63bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf63d000-0xe3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfee0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff] [ 00] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] e820: [mem 0xe4000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88040fc00000 s86592 r8192 d24000 u131072 [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 8254938 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.15.0-rc1-bisect root=/dev/mapper/sysvg-root ro rootdelay=360 console=tty1 console=ttyS1,115200n8 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 32909652K/33543968K available (7590K kernel code, 1115K rwdata, 3548K rodata, 1336K init, 1428K bss, 634316K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObj, CPUs=32, Nodes=2 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-31. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 [ 0.000000] NR_IRQS:16640 nr_irqs:1344 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty1] enabled [ 0.000000] console [ttyS1] enabled [ 0.000000] allocated 134217728 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2666.036 MHz processor [ 0.000033] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.07 BogoMIPS (lpj=10664144) [ 0.005377] pid_max: default: 32768 minimum: 301 [ 0.007686] ACPI: Core revision 20140214 [ 0.013265] ACPI: All ACPI Tables successfully acquired [ 0.016148] Security Framework initialized [ 0.018299] AppArmor: AppArmor initialized [ 0.020311] Yama: becoming mindful. [ 0.024355] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.034816] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.041379] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.045139] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.049055] Initializing cgroup subsys memory [ 0.051333] Initializing cgroup subsys devices [ 0.053525] Initializing cgroup subsys freezer [ 0.055702] Initializing cgroup subsys net_cls [ 0.057846] Initializing cgroup subsys blkio [ 0.060087] Initializing cgroup subsys perf_event [ 0.062448] Initializing cgroup subsys net_prio [ 0.064633] Initializing cgroup subsys hugetlb [ 0.066805] CPU: Physical Processor ID: 0 [ 0.068769] CPU: Processor Core ID: 0 [ 0.070663] ENERGY_PAS: Set to 'normal', was 'performance' [ 0.070663] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.176691] mce: CPU supports 9 MCE banks [ 0.178831] CPU0: Thermal monitoring enabled (TM1) [ 0.181238] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.181238] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.181238] tlb_flushall_shift: 6 [ 0.188621] Freeing SMP alternatives memory: 28K (ffffffff81e66000 - ffffffff81e6d000) [ 0.193553] ftrace: allocating 28795 entries in 113 pages [ 0.208981] Switched APIC routing to physical flat. [ 0.212047] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.254722] smpboot: CPU0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz (fam: 06, model: 2c, stepping: 02) [ 0.368148] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Broken BIOS detected, complain to your hardware vendor. [ 0.374079] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330) [ 0.377785] Intel PMU driver. [ 0.379472] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.382841] ... version: 3 [ 0.384803] ... bit width: 48 [ 0.386807] ... generic registers: 4 [ 0.388757] ... value mask: 0000ffffffffffff [ 0.391404] ... max period: 000000007fffffff [ 0.393952] ... fixed-purpose events: 3 [ 0.396076] ... event mask: 000000070000000f [ 0.400871] x86: Booting SMP configuration: [ 0.402972] .... node #1, CPUs: #1 [ 0.514682] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.518825] [ 0.519639] .... node #0, CPUs: #2 [ 0.535083] .... node #1, CPUs: #3 [ 0.550531] .... node #0, CPUs: #4 [ 0.565883] .... node #1, CPUs: #5 [ 0.581213] .... node #0, CPUs: #6 [ 0.596615] .... node #1, CPUs: #7 [ 0.611969] .... node #0, CPUs: #8 [ 0.627333] .... node #1, CPUs: #9 [ 0.642684] .... node #0, CPUs: #10 [ 0.658173] .... node #1, CPUs: #11 [ 0.673389] .... node #0, CPUs: #12 [ 0.688778] .... node #1, CPUs: #13 [ 0.704116] .... node #0, CPUs: #14 [ 0.719385] .... node #1, CPUs: #15 [ 0.734737] .... node #0, CPUs: #16 [ 0.750033] .... node #1, CPUs: #17 [ 0.765354] .... node #0, CPUs: #18 [ 0.780686] .... node #1, CPUs: #19 [ 0.795932] .... node #0, CPUs: #20 [ 0.811383] .... node #1, CPUs: #21 [ 0.826646] .... node #0, CPUs: #22 [ 0.842095] .... node #1, CPUs: #23 [ 0.857191] x86: Booted up 2 nodes, 24 CPUs [ 0.859595] smpboot: Total of 24 processors activated (127966.29 BogoMIPS) [ 0.892669] devtmpfs: initialized [ 0.899839] evm: security.selinux [ 0.901625] evm: security.SMACK64 [ 0.903283] evm: security.ima [ 0.904744] evm: security.capability [ 0.907684] pinctrl core: initialized pinctrl subsystem [ 0.910539] regulator-dummy: no parameters [ 0.912584] RTC time: 18:24:05, date: 02/17/15 [ 0.914807] NET: Registered protocol family 16 [ 0.917096] cpuidle: using governor ladder [ 0.919094] cpuidle: using governor menu [ 0.921136] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.924936] ACPI: bus type PCI registered [ 0.926857] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.929993] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.934526] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.941111] PCI: Using configuration type 1 for base access [ 0.943890] PCI: HP ProLiant DL380 detected, enabling pci=bfsort. [ 0.949469] ACPI: Added _OSI(Module Device) [ 0.951657] ACPI: Added _OSI(Processor Device) [ 0.953818] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.956275] ACPI: Added _OSI(Processor Aggregator Device) [ 0.963231] ACPI: Interpreter enabled [ 0.965094] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580) [ 0.969644] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580) [ 0.974487] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140214/hwxface-580) [ 0.979010] ACPI: (supports S0 S4 S5) [ 0.980842] ACPI: Using IOAPIC for interrupt routing [ 0.983267] HEST: Table parsing has been initialized. [ 0.985693] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.994385] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-0e]) [ 0.997431] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.001491] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabliASPM [ 1.104859] acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff]; [mem 0xfed00000-0xfed03fff] ignored [ 1.110452] PCI host bridge to bus 0000:00 [ 1.112551] pci_bus 0000:00: root bus resource [bus 00-0e] [ 1.115215] pci_bus 0000:00: root bus resource [mem 0xe7000000-0xfbffffff] [ 1.118657] pci_bus 0000:00: root bus resource [io 0x1000-0x7fff] [ 1.121709] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] [ 1.124695] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] [ 1.127639] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff] [ 1.130691] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff] [ 1.134329] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb] [ 1.137319] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df] [ 1.140382] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.153945] pci 0000:00:01.0: PCI bridge to [bus 05] [ 1.156615] pci 0000:00:02.0: PCI bridge to [bus 06] [ 1.165941] pci 0000:00:03.0: PCI bridge to [bus 0b] [ 1.168479] pci 0000:00:04.0: PCI bridge to [bus 0c] [ 1.177937] pci 0000:00:05.0: PCI bridge to [bus 0d] [ 1.180810] pci 0000:00:06.0: PCI bridge to [bus 0e] [ 1.183356] pci 0000:00:07.0: PCI bridge to [bus 0a] [ 1.193932] pci 0000:00:08.0: PCI bridge to [bus 09] [ 1.201929] pci 0000:00:09.0: PCI bridge to [bus 08] [ 1.204416] pci 0000:00:0a.0: PCI bridge to [bus 07] [ 1.213930] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 1.216426] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 1.225929] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 1.228814] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode) [ 1.232606] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11) [ 1.235908] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) [ 1.239159] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled. [ 1.243166] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. [ 1.247240] ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11) [ 1.250546] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled. [ 1.254433] ACPI: PCI Interrupt Link [LNKGIRQs 5 7 *10 11) [ 1.357804] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11) [ 1.361348] vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none [ 1.365616] vgaarb: loaded [ 1.366996] vgaarb: bridge control possible 0000:01:03.0 [ 1.369921] SCSI subsystem initialized [ 1.372117] ACPI: bus type USB registered [ 1.374261] usbcore: registered new interface driver usbfs [ 1.378566] usbcore: registered new interface driver hub [ 1.381665] usbcore: registered new device driver usb [ 1.384425] PCI: Using ACPI for IRQ routing [ 1.387988] PCI: Discovered peer bus 3e [ 1.390077] PCI host bridge to bus 0000:3e [ 1.392245] pci_bus 0000:3e: root bus resource [io 0x0000-0xffff] [ 1.395243] pci_bus 0000:3e: root bus resource [mem 0x00000000-0xffffffffff] [ 1.398607] pci_bus 0000:3e: No busn resource found for root bus, will use [bus 3e-ff] [ 1.404183] PCI: Discovered peer bus 3f [ 1.406157] PCI host bridge to bus 0000:3f [ 1.408317] pci_bus 0000:3f: root bussource [io 0x0000-0xffff] [ 1.511426] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xffffffffff] [ 1.514854] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff] [ 1.520915] NetLabel: Initializing [ 1.522609] NetLabel: domain hash size = 128 [ 1.524730] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.527150] NetLabel: unlabeled traffic allowed by default [ 1.530015] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 1.533204] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 1.538159] Switched to clocksource hpet [ 1.540296] Could not create debugfs 'set_ftrace_filter' entry [ 1.543139] Could not create debugfs 'set_ftrace_notrace' entry [ 1.552168] AppArmor: AppArmor Filesystem Enabled [ 1.554518] pnp: PnP ACPI init [ 1.556064] ACPI: bus type PNP registered [ 1.558298] system 00:00: [io 0x0408-0x040f] has been reserved [ 1.561280] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 1.564292] system 00:00: [io 0x0700-0x071f] has been reserved [ 1.567152] system 00:00: [io 0x0880-0x08ff] has beeeserved [ 1.670085] system 00:00: [io 0x0900-0x097f] has been reserved [ 1.672947] system 00:00: [io 0x0cd4-0x0cd7] has been reserved [ 1.675848] system 00:00: [io 0x0cd0-0x0cd3] has been reserved [ 1.678890] system 00:00: [io 0x0f50-0x0f58] has been reserved [ 1.681833] system 00:00: [io 0x0ca0-0x0ca1] has been reserved [ 1.684698] system 00:00: [io 0x0ca4-0x0ca5] has been reserved [ 1.687502] system 00:00: [io 0x02f8-0x02ff] has been reserved [ 1.690431] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved [ 1.693785] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved [ 1.697537] pnp: PnP ACPI: found 9 devices [ 1.699579] ACPI: bus type PNP unregistered [ 1.708235] pci 0000:00:01.0: BAR 15: assigned [mem 0xe7000000-0xe70fffff pref] [ 1.711931] pci 0000:00:03.0: BAR 15: assigned [mem 0xe7100000-0xe71fffff pref] [ 1.715505] pci 0000:00:05.0: BAR 15: assigned [mem 0xe7200000-0xe72fffff pref] [ 1.719032] pci 0000:00:08.0: BAR 15: assigned [mem 0xe7300000-0xe73fffff pref] [ 1.722611] pci 0000:00:0: BAR 15: assigned [mem 0xe7400000-0xe74fffff pref] [ 1.826309] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe7500000-0xe75fffff pref] [ 1.829948] pci 0000:00:1c.4: BAR 15: assigned [mem 0xe7600000-0xe76fffff pref] [ 1.833474] pci 0000:05:00.0: BAR 6: assigned [mem 0xe7000000-0xe707ffff pref] [ 1.837145] pci 0000:00:01.0: PCI bridge to [bus 05] [ 1.839544] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 1.842524] pci 0000:00:01.0: bridge window [mem 0xfb300000-0xfb5fffff] [ 1.845796] pci 0000:00:01.0: bridge window [mem 0xe7000000-0xe70fffff pref] [ 1.849240] pci 0000:00:02.0: PCI bridge to [bus 06] [ 1.851914] pci 0000:0b:00.0: BAR 6: assigned [mem 0xe7100000-0xe717ffff pref] [ 1.855528] pci 0000:00:03.0: PCI bridge to [bus 0b] [ 1.857944] pci 0000:00:03.0: bridge window [mem 0xfba00000-0xfbbfffff] [ 1.861269] pci 0000:00:03.0: bridge window [mem 0xe7100000-0xe71fffff pref] [ 1.864755] pci 0000:00:04.0: PCI bridge to [bus 0c] [ 1.867156] pci 0000:0d:00.0: BAR 6: assigned [mem 0xe7200000-0xe727ffff pref] [ 1.870897] pci 0000:05.0: PCI bridge to [bus 0d] [ 1.973366] pci 0000:00:05.0: bridge window [io 0x7000-0x7fff] [ 1.976337] pci 0000:00:05.0: bridge window [mem 0xfbd00000-0xfbffffff] [ 1.979703] pci 0000:00:05.0: bridge window [mem 0xe7200000-0xe72fffff pref] [ 1.983333] pci 0000:00:06.0: PCI bridge to [bus 0e] [ 1.985772] pci 0000:00:07.0: PCI bridge to [bus 0a] [ 1.988166] pci 0000:09:00.0: BAR 6: assigned [mem 0xe7300000-0xe737ffff pref] [ 1.991734] pci 0000:00:08.0: PCI bridge to [bus 09] [ 1.994142] pci 0000:00:08.0: bridge window [io 0x6000-0x6fff] [ 1.997246] pci 0000:00:08.0: bridge window [mem 0xfb700000-0xfb9fffff] [ 2.000607] pci 0000:00:08.0: bridge window [mem 0xe7300000-0xe73fffff pref] [ 2.004042] pci 0000:08:00.0: BAR 6: assigned [mem 0xe7400000-0xe740ffff pref] [ 2.007478] pci 0000:00:09.0: PCI bridge to [bus 08] [ 2.009980] pci 0000:00:09.0: bridge window [io 0x5000-0x5fff] [ 2.013081] pci 0000:00:09.0: bridge window [mem 0xfb600000-0xfb6fffff] [ 2.016333] pci 0000:00:09.0: bridge window [mem 0xe7400-0xe74fffff pref] [ 2.119958] pci 0000:00:0a.0: PCI bridge to [bus 07] [ 2.122372] pci 0000:03:00.0: BAR 6: assigned [mem 0xe7500000-0xe750ffff pref] [ 2.126051] pci 0000:03:00.1: BAR 6: assigned [mem 0xe7510000-0xe751ffff pref] [ 2.129638] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 2.132044] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf9ffffff] [ 2.135273] pci 0000:00:1c.0: bridge window [mem 0xe7500000-0xe75fffff pref] [ 2.138768] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 2.141402] pci 0000:02:00.2: BAR 6: assigned [mem 0xe7600000-0xe760ffff pref] [ 2.144934] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 2.147307] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 2.150347] pci 0000:00:1c.4: bridge window [mem 0xf5d00000-0xf5ffffff] [ 2.153626] pci 0000:00:1c.4: bridge window [mem 0xe7600000-0xe76fffff pref] [ 2.157327] pci 0000:01:03.0: BAR 6: assigned [mem 0xf5c00000-0xf5c1ffff pref] [ 2.160995] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 2.163604] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 2.166548] pci 0000:00:1e.0: bridge window [mem 0xf5c00000-0xf5cfffff] [ 2.169872] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref] [ 2.173869] NET: Registered protocol family 2 [ 2.176351] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 2.180476] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.183951] TCP: Hash tables configured (established 262144 bind 65536) [ 2.187336] TCP: reno registered [ 2.189165] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 2.192372] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 2.195978] NET: Registered protocol family 1 [ 2.214355] Trying to unpack rootfs image as initramfs... [ 2.608055] Freeing initrd memory: 23544K (ffff8800368f2000 - ffff880037ff0000) [ 2.611785] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.614939] software IO TLB [mem 0xdb62f000-0xdf62f000] (64MB) mapped at [ffff8800db62f000-ffff8800df62efff] [ 2.620775] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x1a [ 2.623743] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x1a [ 2.626609] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x1a [ 2.629547] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x1a [ 2.632370] microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x1a [ 2.635164] microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x1a [ 2.637980] microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x1a [ 2.640892] microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x1a [ 2.643712] microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x1a [ 2.646532] microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x1a [ 2.649445] microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x1a [ 2.652286] microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x1a [ 2.655101] microcode: CPU12 sig=0x206c2, pf=0x1, revision=0x1a [ 2.658085] microcode: CPU13 sig=0x206c2, pf=0x1, revision=0x1a [ 2.661018] microcode: CPU14 sig=0x206c2, pf=0x1, revision=0x1a [ 2.663869] microcode: CPU15 sig=0x206c2, pf=0x1, revision=0x1a [ 2.666723] microcode: CPU16 sig=0x206c2, pf=0x1, revision=0x1a [ 2.669666] microcode: CPU17 sig=0x206c2, pf=0x1, revision=0x1a [ 2.672519] microcode: CPU18 sig=0x206c2, pf=0x1, revision=0x1a [ 2.675373] microcode: CPU19 sig=0x206c2, pf=0x1, revision=0x1a [ 2.678205] microcode: CPU20 sig=0x206c2, pf=0x1, revision=0x1a [ 2.681102] microcode: CPU21 sig=0x206c2, pf=0x1, revision=0x1a [ 2.683934] microcode: CPU22 sig=0x206c2, pf=0x1, revision=0x1a [ 2.686780] microcode: CPU23 sig=0x206c2, pf=0x1, revision=0x1a [ 2.689791] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 2.694007] Scanning for low memory corruption every 60 seconds [ 2.697714] futex hash table entries: 8192 (order: 7, 524288 bs) [ 2.801531] Initialise system trusted keyring [ 2.803713] audit: initializing netlink subsys (disabled) [ 2.806377] audit: type=2000 audit(1424197445.356:1): initialized [ 2.834161] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.838781] zbud: loaded [ 2.840396] VFS: Disk quotas dquot_6.5.2 [ 2.842421] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.846129] fuse init (API version 7.23) [ 2.848171] msgmni has been set to 32768 [ 2.850271] Key type big_key registered [ 2.937818] Key type asymmetric registered [ 2.939981] Asymmetric key parser 'x509' registered [ 2.942484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.946152] io scheduler noop registered [ 2.948064] io scheduler deadline registered (default) [ 2.950725] io scheduler cfq registered [ 2.953885] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.956660] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.963088] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.966734] ACPI: Power Button [PWRF] [ 2.969685] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.972486] ACPI: Thermal Zone [THM0] (8 C) [ 2.974639] ERST: Failed to get Error Log Address Range. [ 2.977316] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 2.981146] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.004774] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.028955] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.036166] Linux agpgart interface v0.103 [ 3.041340] brd: module loaded [ 3.044486] loop: module loaded [ 3.046577] libphy: Fixed MDIO Bus: probed [ 3.048646] tun: Universal TUN/TAP device driver, 1.6 [ 3.051220] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 3.054307] PPP generic driver version 2.4.2 [ 3.056538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.059883] ehci-pci: EHCI PCI platform driver [ 3.062276] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 3.064966] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.068557] ehci-pci 0000:00:1d.7: debug port 1 [ 3.074816] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf5bf0000 [ 3.089717] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.092633] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.095905] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.099486] usb usb1: Product: EHCI Host Controller [ 3.101858] usb usb1: Manufacturer: Linux 3.15.0-rc1-bisect ehci_hcd [ 3.104910] usb usb1: SerialNumber: 0000:00:1d.7 [ 3.107492] hub 1-0:1.0: USB hub found [ 3.109434] hub 1-0:1.0: 8 ports detected [ 3.111702] ehci-platform: EHCI generic platform driver [ 3.114263] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.117243] ohci-pci: OHCI PCI platform driver [ 3.119514] ohci-platform: OHCI generic platform driver [ 3.122062] uhci_hcd: USB Universal Host Controller Interface driver [ 3.125292] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.127812] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.131469] uhci_hcd 0000:00:1d.0: detected 2 ports [ 3.133849] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001000 [ 3.136690] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.140059] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.143517] usb usb2: Product: UHCI Host Controller [ 3.145877] usb usb2: Manufacturer: Linux 3.15.0-rc1-bisect uhci_hcd [ 3.148912] usb usb2: SalNumber: 0000:00:1d.0 [ 3.251514] hub 2-0:1.0: USB hub found [ 3.253540] hub 2-0:1.0: 2 ports detected [ 3.255808] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.258445] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.262126] uhci_hcd 0000:00:1d.1: detected 2 ports [ 3.264521] uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001020 [ 3.267384] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.270827] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.274319] usb usb3: Product: UHCI Host Controller [ 3.276687] usb usb3: Manufacturer: Linux 3.15.0-rc1-bisect uhci_hcd [ 3.279814] usb usb3: SerialNumber: 0000:00:1d.1 [ 3.282615] hub 3-0:1.0: USB hub found [ 3.284622] hub 3-0:1.0: 2 ports detected [ 3.286776] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.289614] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.293191] uhci_hcd 0000:00:1d.2: detected 2 ports [ 3.295584] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001040 [ 3.298410] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.301743] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.305209] usb usb4: Product: UHCI Host Controller [ 3.307561] usb usb4: Manufacturer: Linux 3.15.0-rc1-bisect uhci_hcd [ 3.310673] usb usb4: SerialNumber: 0000:00:1d.2 [ 3.313213] hub 4-0:1.0: USB hub found [ 3.315118] hub 4-0:1.0: 2 ports detected [ 3.317272] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.320030] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.323583] uhci_hcd 0000:1d.3: detected 2 ports [ 3.426020] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001060 [ 3.428837] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.432149] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.435600] usb usb5: Product: UHCI Host Controller [ 3.437988] usb usb5: Manufacturer: Linux 3.15.0-rc1-bisect uhci_hcd [ 3.441116] usb usb5: SerialNumber: 0000:00:1d.3 [ 3.443703] hub 5-0:1.0: USB hub found [ 3.445612] hub 5-0:1.0: 2 ports detected [ 3.447711] uhci_hcd 0000:02:00.4: UHCI Host Controller [ 3.450528] uhci_hcd 0000:02:00.4: new USB bus registered, assigned bus number 6 [ 3.454127] uhci_hcd 0000:02:00.4: detected 8 ports [ 3.456473] uhci_hcd 0000:02:00.4: port count misdetected? forcing to 2 ports [ 3.460029] uhci_hcd 0000:02:00.4: irq 17, io base 0x00003c00 [ 3.462916] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.466645] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.470613] usb usb6: Product: UHCI Host Controller [ 3.473299] usb usb6: Manufacturer: Linux 3.15.0-rc1-bisect uhci_hcd [ 3.476660] usb usb6: SerialNumber: 0000:02:00.4 [ 3.479577] hub 6-0:1.0: USB hub found [ 3.481694] hub 6-0:1.0: 2 ports detected [ 3.484026] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 3.490254] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.493006] serio: i8042 Aport at 0x60,0x64 irq 12 [ 3.596349] mousedev: PS/2 mouse device common for all mice [ 3.599977] rtc_cmos 00:08: RTC can wake from S4 [ 3.602988] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 3.606466] rtc_cmos 00:08: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 3.610759] device-mapper: uevent: version 1.0.3 [ 3.613583] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx [ 3.617586] tsc: Refined TSC clocksource calibration: 2665.906 MHz [ 3.621729] ledtrig-cpu: registered to indicate activity on CPUs [ 3.625066] TCP: cubic registered [ 3.627132] NET: Registered protocol family 10 [ 3.630613] NET: Registered protocol family 17 [ 3.633298] Key type dns_resolver registered [ 3.637384] Loading compiled-in X.509 certificates [ 3.641551] Loaded X.509 cert 'Magrathea: Glacier signing key: 6178ea801789398e678a82f7db973567470f5846' [ 3.646861] registered taskstats version 1 [ 3.652775] Key type trusted registered [ 3.658079] Key type encrypted registered [ 3.663551] AppArmor: AppArmor sha1 policy hasg enabled [ 3.766740] ima: No TPM chip found, activating TPM-bypass! [ 3.771212] Magic number: 3:536:443 [ 3.773261] pci0000:3f: hash matches [ 3.775366] pcieport 0000:00:1c.4: hash matches [ 3.778980] rtc_cmos 00:08: setting system clock to 2015-02-17 18:24:08 UTC (1424197448) [ 3.791584] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.794917] EDD information not available. [ 3.801171] Freeing unused kernel memory: 1336K (ffffffff81d18000 - ffffffff81e66000) [ 3.846126] Write protecting the kernel read-only data: 12288k [ 3.882924] Freeing unused kernel memory: 592K (ffff88000176c000 - ffff880001800000) [ 3.930148] Freeing unused kernel memory: 548K (ffff880001b77000 - ffff880001c00000) Loading, please wait... [ 3.992470] udevd[285]: starting version 175 [ 4.041529] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 4.079691] HP HPSA Driver (v 3.4.4-1) [ 4.101056] Adaptec aacraid driver 1.2-0[30300]-ms [ 4.101072] hpsa 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.101159] hpsa 0000:05:00.0: MSIX [ 4.101267] hpsa 0000:05:00.0: Logical aborts not supported [ 4.121350] hpsa 0000:05:00.0: hpsa0: <0x323a> at IRQ 67 using DAC [ 4.142244] scsi0 : hpsa [ 4.142331] hpsa 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.142389] hpsa 0000:09:00.0: MSIX [ 4.142475] hpsa 0000:09:00.0: Logical aborts not supported [ 4.146706] hpsa 0000:05:00.0: RAID device c0b3t0l0 added. [ 4.146708] hpsa 0000:05:00.0: Direct-Access device c0b0t0l0 added. [ 4.146709] hpsa 0000:05:00.0: Direct-Access device c0b0t0l1 added. [ 4.146710] hpsa 0000:05:00.0: Direct-Access device c0b0t0l3 added. [ 4.146970] scsi 0:3:0:0: RAID HP P410i 6.60 PQ: 0 ANSI: 5 [ 4.147478] scsi 0:0:0:0: Direct-Access HP LOGICAL VOLUME 6.60 PQ: 0 ANSI: 5 [ 4.147970] scsi 0:0:0:1: Direct-Access HP LOGICAL VOLUME 6.60 PQ: 0 ANSI: 5 [ 4.148472] scsi 0:0:0:3: Direct-Access HP LOGICAL VOLUME 6.60 PQ: 0 ANSI: 5 [ 4.148954] scsi 0:3:0:0: Attached scsi generic sg0 type 12 [ 4.149266] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 4.149432] sd 0:0:0:0: [sda] 286677120 512-byte logical blocks: (146 GB/136 GiB) [ 4.149565] sd 0:0:0:1: Attached scsi generic sg2 type 0 [ 4.149748] sd 0:0:0:1: [sdb] 4688229296 512-byte logical blocks: (2.40 TB/2.18 TiB) [ 4.149877] sd 0:0:0:0: [sda] Write Protect is off [ 4.149891] sd 0:0:0:3: Attached scsi generic sg3 type 0 [ 4.149943] sd 0:0:0:3: [sdc] 976707632 512-byte logical blocks: (500 GB/465 GiB) [ 4.150133] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.150224] sd 0:0:0:1: [sdb] Write Protect is off [ 4.150415] sd 0:0:0:3: [sdc] Write Protect is off [ 4.150468] sd 0:0:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.150718] sd 0:0:0:3: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.156129] sdc: unknown partition table [ 4.157058] sd 0:0:0:3: [sdc] Attached SCSI disk [ 4.161721] sdb: unknown partition table [ 4.162448] sd 0:0:0:1: [sdb] Attached SCSI disk [ 4.162538] hpsa 0000:09:00.0: hpsa1: <0x323a> at IRQ 75 using DAC [ 4.168196] sda: sda1 [ 4.169192] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.184064] scsi1 : hpsa [ 4.184152] hpsa 0000:0d:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.184209] hpsa 0000:0d:00.0: MSIX [ 4.184295] hpsa 0000:0d:00.0: Logical aborts not supported [ 4.204391] hpsa 0000:0d:00.0: hpsa2: <0x323a> at IRQ 83 using DAC [ 4.208987] hpsa 0000:09:00.0: RAID device c1b3t0l0 added. [ 4.208991] hpsa 0000:09:00.0: Direct-Access device c1b0t0l0 added. [ 4.208992] hpsa 0000:09:00.0: Direct-Access device c1b0t0l1 added. [ 4.208993] hpsa 0000:09:00.0: Direct-Access device c1b0t0l2 added. [ 4.209345] scsi 1:3:0:0: RAID HP P411 6.60 PQ: 0 ANSI: 5 [ 4.209890] scsi 1:0:0:0: Direct-Access HP LOGICAL VOLUME 6.60 PQ: 0 ANSI: 5 [ 4.210400] scsi 1:0:0:1: Direct-Access HP LOGICAL VOLUME 6.60 PQ: 0 ANSI: 5 [ 4.210898] scsi 1:0:0:2: Direct-Access HP LOGICAL VOLUME 6.60 PQ: 0 ANSI: 5 [ 4.211371] scsi 1:3:0:0: Attached scsi generic sg4 type 12 [ 4.211667] sd 1:0:0:0: Attached scsi generic sg5 type 0 [ 4.211833] sd 1:0:0:0: [sdd] 46883734448 512-byte logical blocks: (24.0 TB/21.8 TiB) [ 4.211953] sd 1:0:0:1: Attached scsi generic sg6 type 0 [ 4.212097] sd 1:0:0:1: [sde] 46883734448 512-byte logical blocks: (24.0 TB/21.8 TiB) [ 4.212238] sd 1:0:0:0: [sdd] Write Protect is off [ 4.212241] sd 1:0:0:2: Attached scsi generic sg7 type 0 [ 4.212461] sd 1:0:0:2: [sdf] 46883734448 512-byte logical blocks: (24.0 TB/21.8 TiB) [ 4.212520] sd 1:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.212606] sd 1:0:0:1: [sde] Write Protect is off [ 4.212825] sd 1:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.212968] sd 1:0:0:2: [sdf] Write Protect is off [ 4.213227] sd 1:0:0:2: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.221525] sdd: unknown partition table [ 4.221534] sde: unknown partition table [ 4.222426] sd 1:0:0:0: [sdd] Attached SCSI disk [ 4.222491] sd 1:0:0:1: [sde] Attached SCSI disk [ 4.222634] sdf: unknown partition table [ 4.223278] sd 1:0:0:2: [sdf] Attached SCSI disk [ 4.225431] scsi2 : hpsa [ 4.231126] hpsa 0000:0d:00.0: RAID device c2b3t0l0 added. [ 4.231127] hpsa 0000:0d:00.0: Sequential-Access device c2b2t0l0 added. [ 4.231129] hpsa 0000:0d:00.0: Sequential-Access device c2b2t1l0 added. [ 4.231376] scsi 2:3:0:0: RAID HP P411 6.60 PQ: 0 ANSI: 5 [ 4.232466] scsi 2:2:0:0: Sequential-Access HP Ultrium 6-SCSI 32AW PQ: 0 ANSI: 6 [ 4.234910] scsi 2:2:1:0: Sequential-Access HP Ultrium 5-SCSI Z58W PQ: 0 ANSI: 6 [ 4.236821] scsi 2:3:0:0: Attached scsi generic sg8 type 12 [ 4.237114] scsi 2:2:0:0: Attached scsi generic sg9 type 1 [ 4.237422] scsi 2:2:1:0: Attached scsi generic sg10 type 1 [ 4.276193] usb 4-1: New USB device found, idVendor=1781, idProduct=0c31 [ 4.276194] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.276196] usb 4-1: Product: TellStick Duo [ 4.276197] usb 4-1: Manufacturer: Telldus [ 4.276198] usb 4-1: SerialNumber: AE01DHGO [ 4.521399] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 4.701528] usb 5-1: New USB device found, idVendor=0624, idProduct=0294 [ 4.701529] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.701530] usb 5-1: Product: Dell 03R874 [ 4.701532] usb 5-1: Manufacturer: Avocent [ 4.841302] usb 6-1: new full-speed USB device number 2 using uhci_hcd [ 4.987041] usb 6-1: New USB device found, idVendor=03f0, idProduct=7029 [ 4.987042] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.987043] usb 6-1: Product: Virtual Keyboard [ 4.987044] usb 6-1: Manufacturer: HP [ 7.295749] aacraid 0000:0b:00.0: can't disable ASPM; OS doesn't have ASPM control [ 7.340618] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.5 (December 20, 2013) [ 7.390247] Switched to clocksource tsc [ 7.390344] ahci 0000:08:00.0: controller can do FBS, turning on CAP_FBS [ 7.391224] bnx2 0000:03:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 16, node addr b4:99:ba:b2:48:4e [ 7.391300] Floppy drive(s): fd0 is 1.44M [ 7.392095] bnx2 0000:03:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 17, node addr b4:99:ba:b2:48:50 [ 7.394515] random: nonblocking pool is initialized [ 7.404526] ahci 0000:08:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 7.404528] ahci 0000:08:00.0: flags: 64bit ncq fbs pio [ 7.405762] scsi4 : ahci [ 7.405987] scsi5 : ahci [ 7.406146] scsi6 : ahci [ 7.406289] scsi7 : ahci [ 7.406425] scsi8 : ahci [ 7.406561] scsi9 : ahci [ 7.406702] scsi10 : ahci [ 7.406838] scsi11 : ahci [ 7.406895] ata1: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0100 irq 91 [ 7.406897] ata2: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0180 irq 91 [ 7.406898] ata3: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0200 irq 91 [ 7.406900] ata4: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0280 irq 91 [ 7.406901] ata5: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0300 irq 91 [ 7.406902] ata6: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0380 irq 91 [ 7.406904] ata7: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0400 irq 91 [ 7.406905] ata8: SATA max UDMA/133 abar m2048@0xfb6f0000 port 0xfb6f0480 irq 91 [ 7.580878] AAC0: kernel 5.2-0[17757] Jun 9 2010 [ 7.580879] AAC0: monitor 5.2-0[17757] [ 7.580879] AAC0: bios 5.2-0[17757] [ 7.580881] AAC0: serial 00835EC0188 [ 7.580881] AAC0: Non-DASD support enabled. [ 7.580882] AAC0: 64bit support enabled. [ 7.580882] AAC0: 64 Bit DAC enabled [ 7.599777] scsi3 : aacraid [ 7.599973] scsi 3:0:0:0: Direct-Access Sun ld0 V1.0 PQ: 0 ANSI: 2 [ 7.600111] scsi 3:0:1:0: Direct-Access Sun ld 1027qaj005 V1.0 PQ: 0 ANSI: 2 [ 7.614163] scsi 3:1:0:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 7.618496] scsi 3:1:1:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 7.622848] scsi 3:1:2:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 7.627201] scsi 3:1:3:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 7.631539] scsi 3:1:4:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 7.635886] scsi 3:1:5:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 7.640234] scsi 3:1:6:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 7.644573] scsi 3:1:7:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 7.649307] scsi 3:1:8:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 7.654495] scsi 3:1:9:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 7.659645] scsi 3:1:10:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 7.664560] scsi 3:1:11:0: Direct-Access HITACHI H7220AA3 A28A PQ: 0 ANSI: 5 [ 7.669506] scsi 3:1:13:0: Direct-Access SEAGATE ST31000N SU15 PQ: 0 ANSI: 5 [ 7.675256] scsi 3:1:14:0: Direct-Access SEAGATE ST31000N SU15 PQ: 0 ANSI: 5 [ 7.681245] scsi 3:1:16:0: Direct-Access SEAGATE ST31000N SU15 PQ: 0 ANSI: 5 [ 7.687092] scsi 3:1:17:0: Direct-Access SEAGATE ST31000N SU15 PQ: 0 ANSI: 5 [ 7.692879] scsi 3:1:18:0: Direct-Access SEAGATE ST31000N SU15 PQ: 0 ANSI: 5 [ 7.698854] scsi 3:1:19:0: Direct-Access SEAGATE ST31000N SU15 PQ: 0 ANSI: 5 [ 7.703682] scsi 3:1:20:0: Direct-Access HITACHI HUA7210S AC5A PQ: 0 ANSI: 5 [ 7.707229] scsi 3:1:21:0: Direct-Access SEAGATE ST31000N SU15 PQ: 0 ANSI: 5 [ 7.711627] scsi 3:1:22:0: Direct-Access HITACHI HUA7210S AC5A PQ: 0 ANSI: 5 [ 7.732431] ata4: SATA link down (SStatus 0 SControl 300) [ 7.732455] ata2: SATA link down (SStatus 0 SControl 300) [ 7.732474] ata7: SATA link down (SStatus 0 SControl 300) [ 7.732491] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.732507] ata5: SATA link down (SStatus 0 SControl 300) [ 7.732522] ata6: SATA link down (SStatus 0 SControl 300) [ 7.732552] ata3: SATA link down (SStatus 0 SControl 300) [ 7.753926] scsi 3:3:0:0: Enclosure SUN Storage J4200 3A53 PQ: 0 ANSI: 5 [ 7.769249] scsi 3:3:1:0: Enclosure SUN Storage J4200 3A53 PQ: 0 ANSI: 5 [ 7.795201] sd 3:0:0:0: [sdg] Very big device. Trying to use READ CAPACITY(16). [ 7.795221] sd 3:0:0:0: [sdg] 15619502080 512-byte logical blocks: (7.99 TB/7.27 TiB) [ 7.795240] sd 3:0:0:0: [sdg] Write Protect is off [ 7.795254] sd 3:0:0:0: Attached scsi generic sg11 type 0 [ 7.795341] sd 3:0:0:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 7.795490] sd 3:0:1:0: [sdh] Very big device. Trying to use READ CAPACITY(16). [ 7.795500] sd 3:0:1:0: [sdh] 31205601280 512-byte logical blocks: (15.9 TB/14.5 TiB) [ 7.795513] sd 3:0:1:0: [sdh] Write Protect is off [ 7.795529] sd 3:0:1:0: Attached scsi generic sg12 type 0 [ 7.795545] sd 3:0:1:0: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 7.795548] sd 3:0:0:0: [sdg] Very big device. Trying to use READ CAPACITY(16). [ 7.795689] sd 3:0:1:0: [sdh] Very big device. Trying to use READ CAPACITY(16). [ 7.795719] scsi 3:1:0:0: Attached scsi generic sg13 type 0 [ 7.795904] scsi 3:1:1:0: Attached scsi generic sg14 type 0 [ 7.796009] sdh: unknown partition table [ 7.796089] sd 3:0:1:0: [sdh] Very big device. Trying to use READ CAPACITY(16). [ 7.796113] sdg: unknown partition table [ 7.796129] sd 3:0:1:0: [sdh] Attached SCSI removable disk [ 7.796172] scsi 3:1:2:0: Attached scsi generic sg15 type 0 [ 7.796339] sd 3:0:0:0: [sdg] Very big device. Trying to use READ CAPACITY(16). [ 7.796463] scsi 3:1:3:0: Attached scsi generic sg16 type 0 [ 7.796586] sd 3:0:0:0: [sdg] Attached SCSI removable disk [ 7.796642] scsi 3:1:4:0: Attached scsi generic sg17 type 0 [ 7.796864] scsi 3:1:5:0: Attached scsi generic sg18 type 0 [ 7.797099] scsi 3:1:6:0: Attached scsi generic sg19 type 0 [ 7.797314] scsi 3:1:7:0: Attached scsi generic sg20 type 0 [ 7.797544] scsi 3:1:8:0: Attached scsi generic sg21 type 0 [ 7.797753] scsi 3:1:9:0: Attached scsi generic sg22 type 0 [ 7.797962] scsi 3:1:10:0: Attached scsi generic sg23 type 0 [ 7.798176] scsi 3:1:11:0: Attached scsi generic sg24 type 0 [ 7.798385] scsi 3:1:13:0: Attached scsi generic sg25 type 0 [ 7.798554] scsi 3:1:14:0: Attached scsi generic sg26 type 0 [ 7.798726] scsi 3:1:16:0: Attached scsi generic sg27 type 0 [ 7.798895] scsi 3:1:17:0: Attached scsi generic sg28 type 0 [ 7.799057] scsi 3:1:18:0: Attached scsi generic sg29 type 0 [ 7.799221] scsi 3:1:19:0: Attached scsi generic sg30 type 0 [ 7.799386] scsi 3:1:20:0: Attached scsi generic sg31 type 0 [ 7.799558] scsi 3:1:21:0: Attached scsi generic sg32 type 0 [ 7.799749] scsi 3:1:22:0: Attached scsi generic sg33 type 0 [ 7.799945] scsi 3:3:0:0: Attached scsi generic sg34 type 13 [ 7.800138] scsi 3:3:1:0: Attached scsi generic sg35 type 13 [ 7.859320] ata8.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 [ 7.859493] ata8.00: configured for UDMA/66 [ 7.900405] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.900574] ata1.00: ATA-8: ROG RAIDR Express PCIe SSD, MV.R00-0, max UDMA7 [ 7.900575] ata1.00: 468555520 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 7.900768] ata1.00: configured for UDMA/133 [ 7.900957] scsi 4:0:0:0: Direct-Access ATA ROG RAIDR Expres MV.R PQ: 0 ANSI: 5 [ 7.901336] sd 4:0:0:0: Attached scsi generic sg36 type 0 [ 7.901343] sd 4:0:0:0: [sdi] 468555520 512-byte logical blocks: (239 GB/223 GiB) [ 7.901392] sd 4:0:0:0: [sdi] Write Protect is off [ 7.901410] sd 4:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.901710] scsi 11:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5 [ 7.903322] sdi: unknown partition table [ 7.903433] sd 4:0:0:0: [sdi] Attached SCSI disk [ 7.920337] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 7.920337] ata8.00: irq_stat 0x40000001 [ 7.920340] scsi 11:0:0:0: CDB: [ 7.920343] Inquiry: 12 01 00 00 ff 00 [ 7.920346] ata8.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 0 dma 16640 in [ 7.920346] res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) [ 7.920349] ata8: hard resetting link [ 8.248266] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8.248488] ata8.00: configured for UDMA/66 [ 8.248556] ata8: EH complete [ 8.248841] scsi 11:0:0:0: Attached scsi generic sg37 type 3 [ 10.411765] floppy0: no floppy controllers found [ 10.411775] work still pending [ 11.961890] hidraw: raw HID events driver (C) Jiri Kosina [ 11.992645] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 12.028823] st 2:2:0:0: Attached scsi tape st0 [ 12.053619] st 2:2:0:0: st0: try direct i/o: yes (alignment 4 B) [ 12.088031] st 2:2:1:0: Attached scsi tape st1 [ 12.113337] st 2:2:1:0: st1: try direct i/o: yes (alignment 4 B) [ 12.148914] [drm] Initialized drm 1.1.0 20060810 [ 12.190464] osst :I: Tape driver with OnStream support version 0.99.4 [ 12.190464] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 12.224126] usbcore: registered new interface driver usbhid [ 12.224127] usbhid: USB HID core driver [ 12.322253] SSE version of gcm_enc/dec engaged. [ 12.348898] input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:0624:0294.0001/input/input3 [ 12.412850] hid-generic 0003:0624:0294.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1d.3-1/input0 [ 12.480714] input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:0624:0294.0002/input/input4 [ 12.542793] hid-generic 0003:0624:0294.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1d.3-1/input1 [ 12.607186] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:02:00.4/usb6/6-1/6-1:1.0/0003:03F0:7029.0003/input/input5 [ 12.678746] hid-generic 0003:03F0:7029.0003: input,hidraw2: USB HID v1.01 Keyboard [HP Virtual Keyboard ] on usb-0000:02:00.4-1/input0 [ 12.748997] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:02:00.4/usb6/6-1/6-1:1.1/0003:03F0:7029.0004/input/input6 [ 12.822386] hid-generic 0003:03F0:7029.0004: input,hidraw3: USB HID v1.01 Mouse [HP Virtual Keyboard ] on usb-0000:02:00.4-1/input1 [ 12.893761] [drm] radeon kernel modesetting enabled. [ 12.921801] [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB). [ 12.966166] [drm] register mmio base: 0xF5CF0000 [ 12.992158] [drm] register mmio size: 65536 [ 13.015915] radeon 0000:01:03.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (64M used) [ 13.065294] radeon 0000:01:03.0: GTT: 512M 0x00000000C8000000 - 0x00000000E7FFFFFF [ 13.108432] [drm] Detected VRAM RAM=128M, BAR=128M [ 13.135767] [drm] RAM width 16bits DDR [ 13.156540] [TTM] Zone kernel: Available graphics memory: 16467850 kiB [ 13.192727] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 13.230685] [TTM] Initializing pool allocator [ 13.255845] [TTM] Initializing DMA pool allocator [ 13.283786] [drm] radeon: 64M of VRAM memory ready [ 13.311292] [drm] radeon: 512M of GTT memory ready. [ 13.339328] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 13.394809] [drm] PCI GART of 512M enabled (table at 0x0000000036B00000). [ 13.433313] radeon 0000:01:03.0: WB disabled [ 13.457515] radeon 0000:01:03.0: fence driver on ring 0 use gpu addr 0x00000000c8000000 and cpu addr 0xffff880036a82000 [ 13.517613] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 13.554595] [drm] Driver supports precise vblank timestamp query. [ 13.587527] [drm] radeon: irq initialized. [ 13.610995] [drm] Loading R100 Microcode [ 13.633616] [drm] radeon: ring at 0x00000000C8001000 [ 13.662563] [drm] ring test succeeded in 1 usecs [ 14.186619] [drm] ib test succeeded in 0 usecs [ 14.209578] [drm] No TV DAC info found in BIOS [ 14.234710] [drm] Radeon Display Connectors [ 14.257670] [drm] Connector 0: [ 14.274082] [drm] VGA-1 [ 14.289129] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 14.322991] [drm] Encoders: [ 14.339625] [drm] CRT1: INTERNAL_DAC1 [ 14.362031] [drm] Connector 1: [ 14.379513] [drm] VGA-2 [ 14.394081] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c [ 14.428083] [drm] Encoders: [ 14.444065] [drm] CRT2: INTERNAL_DAC2 [ 14.508682] [drm] fb mappable at 0xE8040000 [ 14.531017] [drm] vram apper at 0xE8000000 [ 14.553071] [drm] size 786432 [ 14.570223] [drm] fb depth is 8 [ 14.588228] [drm] pitch is 1024 [ 14.607580] fbcon: radeondrmfb (fb0) is primary device [ 14.760411] Console: switching to colour frame buffer device 128x48 [ 14.830139] radeon 0000:01:03.0: fb0: radeondrmfb frame buffer device [ 14.866382] radeon 0000:01:03.0: registered panic notifier [ 14.898034] [drm] Initialized radeon 2.38.0 20080528 for 0000:01:03.0 on minor 0 [ 23.388128] ses 3:3:0:0: Attached Enclosure device [ 23.412821] ses 3:3:1:0: Attached Enclosure device udevd[428]: timeout: killing 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [680] udevd[434]: timeout: killing 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [679] udevd[433]: timeout: killing 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [674] udevd[439]: timeout: killing 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [678] udevd[428]: 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [680] terminated by signal 9 (Killed) udevd[433]: 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [674] terminated by signal 9 (Killed) udevd[439]: 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [678] terminated by signal 9 (Killed) udevd[434]: 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [679] terminated by signal 9 (Killed) udevd[438]: timeout: killing 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [677] udevd[438]: 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [677] terminated by signal 9 (Killed) udevd[367]: timeout: killing 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [683] udevd[367]: 'watershed sh -c '/sbin/lvm vgscan; /sbin/lvm vgchange -a y'' [683] terminated by signal 9 (Killed) [ 69.654011] device-mapper: table: 252:7: snapshot: Snapshot cow pairing for exception table handover failed [ 69.708247] device-mapper: ioctl: error adding target to table [ 69.744730] device-mapper: table: 252:7: snapshot: Snapshot cow pairing for exception table handover failed [ 69.798851] device-mapper: ioctl: error adding target to table Begin: Loading essential drivers ... [ 70.916757] md: linear personality registered for level -1 [ 70.955064] md: multipath personality registered for level -4 [ 70.996153] md: raid0 personality registered for level 0 [ 71.067029] md: raid1 personality registered for level 1 [ 71.105719] async_tx: api initialized (async) [ 71.141007] xor: measuring software checksum speed [ 71.206325] prefetch64-sse: 11309.000 MB/sec [ 71.270304] generic_sse: 9951.000 MB/sec [ 71.294947] xor: using function: prefetch64-sse (11309.000 MB/sec) [ 71.406276] raid6: sse2x1 6599 MB/s [ 71.494240] raid6: sse2x2 7705 MB/s [ 71.582235] raid6: sse2x4 8479 MB/s [ 71.601486] raid6: using algorithm sse2x4 (8479 MB/s) [ 71.630157] raid6: using ssse3x2 recovery algorithm [ 71.758437] md: raid6 personality registered for level 6 [ 71.790280] md: raid5 personality registered for level 5 [ 71.823691] md: raid4 personality registered for level 4 [ 71.910292] md: raid10 personality registered for level 10
Attachment:
signature.asc
Description: OpenPGP digital signature
