Re: [PATCH v2 2/2] [SCSI] sg: fix EWOULDBLOCK errors with scsi-mq

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15-02-13 12:10 PM, Tony Battersby wrote:
With scsi-mq enabled, userspace programs can get unexpected EWOULDBLOCK
(a.k.a. EAGAIN) errors when submitting commands to the SCSI generic
driver.  Fix by calling blk_get_request() with GFP_KERNEL instead of
GFP_ATOMIC.

Note: to avoid introducing a potential deadlock, this patch should be
applied after the patch titled "sg: fix unkillable I/O wait deadlock
with scsi-mq".

Cc: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # 3.17+
Signed-off-by: Tony Battersby <tonyb@xxxxxxxxxxxxxxx>

Acked-by: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
Tested-by: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>

For inclusion in kernel 3.20.

The difference in behavior is due to bt_get() in block/blk-mq-tag.c
checking for __GFP_WAIT.

The bsg driver already calls blk_get_request() with GFP_KERNEL, so there
is no need for a change there.

--- linux-3.19.0/drivers/scsi/sg.c.orig	2015-02-13 11:04:40.000000000 -0500
+++ linux-3.19.0/drivers/scsi/sg.c	2015-02-13 11:05:14.000000000 -0500
@@ -1695,7 +1695,22 @@ sg_start_req(Sg_request *srp, unsigned c
  			return -ENOMEM;
  	}

+	/*
+	 * NOTE
+	 *
+	 * With scsi-mq enabled, there are a fixed number of preallocated
+	 * requests equal in number to shost->can_queue.  If all of the
+	 * preallocated requests are already in use, then using GFP_ATOMIC with
+	 * blk_get_request() will return -EWOULDBLOCK, whereas using GFP_KERNEL
+	 * will cause blk_get_request() to sleep until an active command
+	 * completes, freeing up a request.  Neither option is ideal, but
+	 * GFP_KERNEL is the better choice to prevent userspace from getting an
+	 * unexpected EWOULDBLOCK.
+	 *
+	 * With scsi-mq disabled, blk_get_request() with GFP_KERNEL usually
+	 * does not sleep except under memory pressure.
+	 */
+	rq = blk_get_request(q, rw, GFP_KERNEL);
-	rq = blk_get_request(q, rw, GFP_ATOMIC);
  	if (IS_ERR(rq)) {
  		kfree(long_cmdp);
  		return PTR_ERR(rq);

--

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux