[PATCH 18/36] aha1542: Call wait_mask from aha1542_out

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



aha1542_out call is always followed by wait_mask.
Move the call into aha1542_out to simplify code.

Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/scsi/aha1542.c |   17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c
index b8e4952..4849d02 100644
--- a/drivers/scsi/aha1542.c
+++ b/drivers/scsi/aha1542.c
@@ -185,6 +185,8 @@ static int aha1542_out(unsigned int base, u8 *cmdp, int len)
 		outb(*cmdp++, DATA(base));
 	}
 	spin_unlock_irqrestore(&aha1542_lock, flags);
+	if (!wait_mask(INTRFLAGS(base), INTRMASK, HACC, 0, 0))
+		return 1;
 
 	return 0;
 }
@@ -650,8 +652,7 @@ static void setup_mailboxes(int bse, struct Scsi_Host *shpnt)
 	};
 	aha1542_intr_reset(bse);	/* reset interrupts, so they don't block */
 	any2scsi((cmd + 2), isa_virt_to_bus(mb));
-	aha1542_out(bse, cmd, 5);
-	if (!wait_mask(INTRFLAGS(bse), INTRMASK, HACC, 0, 0))
+	if (aha1542_out(bse, cmd, 5))
 		printk(KERN_ERR "aha1542_detect: failed setting up mailboxes\n");
 	aha1542_intr_reset(bse);
 }
@@ -744,8 +745,7 @@ static int aha1542_mbenable(int base)
 		if ((mbenable_result[0] & 0x08) && (mbenable_result[1] & 0x03))
 			retval = BIOS_TRANSLATION_25563;
 
-		aha1542_out(base, mbenable_cmd, 3);
-		if (!wait_mask(INTRFLAGS(base), INTRMASK, HACC, 0, 0))
+		if (aha1542_out(base, mbenable_cmd, 3))
 			goto fail;
 	};
 	while (0) {
@@ -879,19 +879,16 @@ static void aha1542_set_bus_times(int indx)
 		offcmd[1] = setup_busoff[indx];
 	}
 	aha1542_intr_reset(base_io);
-	aha1542_out(base_io, oncmd, 2);
-	if (!wait_mask(INTRFLAGS(base_io), INTRMASK, HACC, 0, 0))
+	if (aha1542_out(base_io, oncmd, 2))
 		goto fail;
 	aha1542_intr_reset(base_io);
-	aha1542_out(base_io, offcmd, 2);
-	if (!wait_mask(INTRFLAGS(base_io), INTRMASK, HACC, 0, 0))
+	if (aha1542_out(base_io, offcmd, 2))
 		goto fail;
 	if (setup_dmaspeed[indx] >= 0) {
 		u8 dmacmd[] = {CMD_DMASPEED, 0};
 		dmacmd[1] = setup_dmaspeed[indx];
 		aha1542_intr_reset(base_io);
-		aha1542_out(base_io, dmacmd, 2);
-		if (!wait_mask(INTRFLAGS(base_io), INTRMASK, HACC, 0, 0))
+		if (aha1542_out(base_io, dmacmd, 2))
 			goto fail;
 	}
 	aha1542_intr_reset(base_io);
-- 
Ondrej Zary

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux