On 02/05/2015 08:23 PM, James Smart wrote:
> ---
> drivers/scsi/lpfc/lpfc_hw4.h | 1 +
> drivers/scsi/lpfc/lpfc_init.c | 179 +++++++++++++++++++++++++++++-------------
> 2 files changed, 125 insertions(+), 55 deletions(-)
>
> diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
> index f432ec1..3121ec4 100644
> --- a/drivers/scsi/lpfc/lpfc_hw4.h
> +++ b/drivers/scsi/lpfc/lpfc_hw4.h
> @@ -3244,6 +3244,7 @@ struct lpfc_acqe_sli {
> #define LPFC_SLI_EVENT_TYPE_NVLOG_POST 0x4
> #define LPFC_SLI_EVENT_TYPE_DIAG_DUMP 0x5
> #define LPFC_SLI_EVENT_TYPE_MISCONFIGURED 0x9
> +#define LPFC_SLI_EVENT_TYPE_REMOTE_DPORT 0xA
> };
>
> /*
> diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
> index 2b5b910..4ba91af 100644
> --- a/drivers/scsi/lpfc/lpfc_init.c
> +++ b/drivers/scsi/lpfc/lpfc_init.c
> @@ -1330,13 +1330,14 @@ lpfc_offline_eratt(struct lpfc_hba *phba)
> void
> lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
> {
> + spin_lock_irq(&phba->hbalock);
> + phba->link_state = LPFC_HBA_ERROR;
> + spin_unlock_irq(&phba->hbalock);
Hi James,
please explain why is the spinlock^ needed?
There seems to be lot of other places where link_state is not protected,
for example it is evaluated in lpfc_sli4_handle_received_buffer with no lock.
Could you please also add some more description to the of the body your mails,
sometimes a subject only is not enough.
Thanks,
Tomas
> +
> lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
> lpfc_offline(phba);
> - lpfc_sli4_brdreset(phba);
> lpfc_hba_down_post(phba);
> - lpfc_sli4_post_status_check(phba);
> lpfc_unblock_mgmt_io(phba);
> - phba->link_state = LPFC_HBA_ERROR;
> }
>
> /**
> @@ -1629,6 +1630,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
> uint32_t uerrlo_reg, uemasklo_reg;
> uint32_t pci_rd_rc1, pci_rd_rc2;
> bool en_rn_msg = true;
> + struct temp_event temp_event_data;
> int rc;
>
> /* If the pci channel is offline, ignore possible errors, since
> @@ -1636,9 +1638,6 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
> */
> if (pci_channel_offline(phba->pcidev))
> return;
> - /* If resets are disabled then leave the HBA alone and return */
> - if (!phba->cfg_enable_hba_reset)
> - return;
>
> if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
> switch (if_type) {
> @@ -1654,6 +1653,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
> return;
> lpfc_sli4_offline_eratt(phba);
> break;
> +
> case LPFC_SLI_INTF_IF_TYPE_2:
> pci_rd_rc1 = lpfc_readl(
> phba->sli4_hba.u.if_type2.STATUSregaddr,
> @@ -1668,15 +1668,27 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
> reg_err1 = readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
> reg_err2 = readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
> if (bf_get(lpfc_sliport_status_oti, &portstat_reg)) {
> - /* TODO: Register for Overtemp async events. */
> lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
> "2889 Port Overtemperature event, "
> - "taking port offline\n");
> + "taking port offline Data: x%x x%x\n",
> + reg_err1, reg_err2);
> +
> + temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
> + temp_event_data.event_code = LPFC_CRIT_TEMP;
> + temp_event_data.data = 0xFFFFFFFF;
> +
> + shost = lpfc_shost_from_vport(phba->pport);
> + fc_host_post_vendor_event(shost, fc_get_event_number(),
> + sizeof(temp_event_data),
> + (char *)&temp_event_data,
> + SCSI_NL_VID_TYPE_PCI
> + | PCI_VENDOR_ID_EMULEX);
> +
> spin_lock_irq(&phba->hbalock);
> phba->over_temp_state = HBA_OVER_TEMP;
> spin_unlock_irq(&phba->hbalock);
> lpfc_sli4_offline_eratt(phba);
> - break;
> + return;
> }
> if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
> reg_err2 == SLIPORT_ERR2_REG_FW_RESTART) {
> @@ -1693,6 +1705,10 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
> lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
> "3145 Port Down: Provisioning\n");
>
> + /* If resets are disabled then leave the HBA alone and return */
> + if (!phba->cfg_enable_hba_reset)
> + return;
> +
> /* Check port status register for function reset */
> rc = lpfc_sli4_port_sta_fn_reset(phba, LPFC_MBX_NO_WAIT,
> en_rn_msg);
> @@ -4044,18 +4060,21 @@ lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli)
> char port_name;
> char message[128];
> uint8_t status;
> + uint8_t evt_type;
> + struct temp_event temp_event_data;
> struct lpfc_acqe_misconfigured_event *misconfigured;
> + struct Scsi_Host *shost;
> +
> + evt_type = bf_get(lpfc_trailer_type, acqe_sli);
>
> - /* special case misconfigured event as it contains data for all ports */
> - if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
> - LPFC_SLI_INTF_IF_TYPE_2) ||
> - (bf_get(lpfc_trailer_type, acqe_sli) !=
> - LPFC_SLI_EVENT_TYPE_MISCONFIGURED)) {
> + /* Special case Lancer */
> + if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
> + LPFC_SLI_INTF_IF_TYPE_2) {
> lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
> "2901 Async SLI event - Event Data1:x%08x Event Data2:"
> "x%08x SLI Event Type:%d\n",
> acqe_sli->event_data1, acqe_sli->event_data2,
> - bf_get(lpfc_trailer_type, acqe_sli));
> + evt_type);
> return;
> }
>
> @@ -4063,58 +4082,107 @@ lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli)
> if (port_name == 0x00)
> port_name = '?'; /* get port name is empty */
>
> - misconfigured = (struct lpfc_acqe_misconfigured_event *)
> + switch (evt_type) {
> + case LPFC_SLI_EVENT_TYPE_OVER_TEMP:
> + temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
> + temp_event_data.event_code = LPFC_THRESHOLD_TEMP;
> + temp_event_data.data = (uint32_t)acqe_sli->event_data1;
> +
> + lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
> + "3190 Over Temperature:%d Celsius- Port Name %c\n",
> + acqe_sli->event_data1, port_name);
> +
> + shost = lpfc_shost_from_vport(phba->pport);
> + fc_host_post_vendor_event(shost, fc_get_event_number(),
> + sizeof(temp_event_data),
> + (char *)&temp_event_data,
> + SCSI_NL_VID_TYPE_PCI
> + | PCI_VENDOR_ID_EMULEX);
> + break;
> + case LPFC_SLI_EVENT_TYPE_NORM_TEMP:
> + temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
> + temp_event_data.event_code = LPFC_NORMAL_TEMP;
> + temp_event_data.data = (uint32_t)acqe_sli->event_data1;
> +
> + lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
> + "3191 Normal Temperature:%d Celsius - Port Name %c\n",
> + acqe_sli->event_data1, port_name);
> +
> + shost = lpfc_shost_from_vport(phba->pport);
> + fc_host_post_vendor_event(shost, fc_get_event_number(),
> + sizeof(temp_event_data),
> + (char *)&temp_event_data,
> + SCSI_NL_VID_TYPE_PCI
> + | PCI_VENDOR_ID_EMULEX);
> + break;
> + case LPFC_SLI_EVENT_TYPE_MISCONFIGURED:
> + misconfigured = (struct lpfc_acqe_misconfigured_event *)
> &acqe_sli->event_data1;
>
> - /* fetch the status for this port */
> - switch (phba->sli4_hba.lnk_info.lnk_no) {
> - case LPFC_LINK_NUMBER_0:
> - status = bf_get(lpfc_sli_misconfigured_port0,
> + /* fetch the status for this port */
> + switch (phba->sli4_hba.lnk_info.lnk_no) {
> + case LPFC_LINK_NUMBER_0:
> + status = bf_get(lpfc_sli_misconfigured_port0,
> &misconfigured->theEvent);
> - break;
> - case LPFC_LINK_NUMBER_1:
> - status = bf_get(lpfc_sli_misconfigured_port1,
> + break;
> + case LPFC_LINK_NUMBER_1:
> + status = bf_get(lpfc_sli_misconfigured_port1,
> &misconfigured->theEvent);
> - break;
> - case LPFC_LINK_NUMBER_2:
> - status = bf_get(lpfc_sli_misconfigured_port2,
> + break;
> + case LPFC_LINK_NUMBER_2:
> + status = bf_get(lpfc_sli_misconfigured_port2,
> &misconfigured->theEvent);
> - break;
> - case LPFC_LINK_NUMBER_3:
> - status = bf_get(lpfc_sli_misconfigured_port3,
> + break;
> + case LPFC_LINK_NUMBER_3:
> + status = bf_get(lpfc_sli_misconfigured_port3,
> &misconfigured->theEvent);
> - break;
> - default:
> - status = ~LPFC_SLI_EVENT_STATUS_VALID;
> - break;
> - }
> + break;
> + default:
> + status = ~LPFC_SLI_EVENT_STATUS_VALID;
> + break;
> + }
>
> - switch (status) {
> - case LPFC_SLI_EVENT_STATUS_VALID:
> - return; /* no message if the sfp is okay */
> - case LPFC_SLI_EVENT_STATUS_NOT_PRESENT:
> - sprintf(message, "Optics faulted/incorrectly installed/not " \
> - "installed - Reseat optics, if issue not "
> - "resolved, replace.");
> - break;
> - case LPFC_SLI_EVENT_STATUS_WRONG_TYPE:
> - sprintf(message,
> - "Optics of two types installed - Remove one optic or " \
> - "install matching pair of optics.");
> - break;
> - case LPFC_SLI_EVENT_STATUS_UNSUPPORTED:
> - sprintf(message, "Incompatible optics - Replace with " \
> + switch (status) {
> + case LPFC_SLI_EVENT_STATUS_VALID:
> + return; /* no message if the sfp is okay */
> + case LPFC_SLI_EVENT_STATUS_NOT_PRESENT:
> + sprintf(message, "Optics faulted/incorrectly "
> + "installed/not installed - Reseat optics, "
> + "if issue not resolved, replace.");
> + break;
> + case LPFC_SLI_EVENT_STATUS_WRONG_TYPE:
> + sprintf(message,
> + "Optics of two types installed - Remove one "
> + "optic or install matching pair of optics.");
> + break;
> + case LPFC_SLI_EVENT_STATUS_UNSUPPORTED:
> + sprintf(message, "Incompatible optics - Replace with "
> "compatible optics for card to function.");
> + break;
> + default:
> + /* firmware is reporting a status we don't know about */
> + sprintf(message, "Unknown event status x%02x", status);
> + break;
> + }
> +
> + lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
> + "3176 Misconfigured Physical Port - "
> + "Port Name %c %s\n", port_name, message);
> + break;
> + case LPFC_SLI_EVENT_TYPE_REMOTE_DPORT:
> + lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
> + "3192 Remote DPort Test Initiated - "
> + "Event Data1:x%08x Event Data2: x%08x\n",
> + acqe_sli->event_data1, acqe_sli->event_data2);
> break;
> default:
> - /* firmware is reporting a status we don't know about */
> - sprintf(message, "Unknown event status x%02x", status);
> + lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
> + "3193 Async SLI event - Event Data1:x%08x Event Data2:"
> + "x%08x SLI Event Type:%d\n",
> + acqe_sli->event_data1, acqe_sli->event_data2,
> + evt_type);
> break;
> }
> -
> - lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
> - "3176 Misconfigured Physical Port - "
> - "Port Name %c %s\n", port_name, message);
> }
>
> /**
> @@ -5183,6 +5251,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
> rc = lpfc_pci_function_reset(phba);
> if (unlikely(rc))
> return -ENODEV;
> + phba->temp_sensor_support = 1;
> }
>
> /* Create the bootstrap mailbox command */
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
