Reviewed-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
On Wed, 3 Dec 2014, Rasmus Villemoes wrote:
> Consecutive seq_puts calls with literal strings may be replaced by a
> single call, saving a little .text.
>
> Signed-off-by: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/scsi/advansys.c | 43 +++++++++++++++----------------------------
> drivers/scsi/atp870u.c | 5 ++---
> drivers/scsi/dc395x.c | 4 ++--
> drivers/scsi/pcmcia/nsp_cs.c | 4 ++--
> 4 files changed, 21 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
> index d31fc6d..c4d0910 100644
> --- a/drivers/scsi/advansys.c
> +++ b/drivers/scsi/advansys.c
> @@ -2903,11 +2903,9 @@ static void asc_prt_adv_bios(struct seq_file *m, struct Scsi_Host *shost)
> * the BIOS code segment base address.
> */
> if (boardp->bios_signature != 0x55AA) {
> - seq_puts(m, "Disabled or Pre-3.1\n");
> - seq_puts(m,
> - "BIOS either disabled or Pre-3.1. If it is pre-3.1, then a newer version\n");
> - seq_puts(m,
> - "can be found at the ConnectCom FTP site: ftp://ftp.connectcom.net/pub\n";);
> + seq_puts(m, "Disabled or Pre-3.1\n"
> + "BIOS either disabled or Pre-3.1. If it is pre-3.1, then a newer version\n"
> + "can be found at the ConnectCom FTP site: ftp://ftp.connectcom.net/pub\n";);
> } else {
> major = (boardp->bios_version >> 12) & 0xF;
> minor = (boardp->bios_version >> 8) & 0xF;
> @@ -2923,9 +2921,8 @@ static void asc_prt_adv_bios(struct seq_file *m, struct Scsi_Host *shost)
> */
> if (major < 3 || (major <= 3 && minor < 1) ||
> (major <= 3 && minor <= 1 && letter < ('I' - 'A'))) {
> - seq_puts(m,
> - "Newer version of ROM BIOS is available at the ConnectCom FTP site:\n");
> - seq_puts(m, "ftp://ftp.connectcom.net/pub\n";);
> + seq_puts(m, "Newer version of ROM BIOS is available at the ConnectCom FTP site:\n"
> + "ftp://ftp.connectcom.net/pub\n";);
> }
> }
> }
> @@ -3071,27 +3068,23 @@ static void asc_prt_asc_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
> seq_puts(m, " Target ID: ");
> for (i = 0; i <= ASC_MAX_TID; i++)
> seq_printf(m, " %d", i);
> - seq_puts(m, "\n");
>
> - seq_puts(m, " Disconnects: ");
> + seq_puts(m, "\n Disconnects: ");
> for (i = 0; i <= ASC_MAX_TID; i++)
> seq_printf(m, " %c",
> (ep->disc_enable & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
> - seq_puts(m, "\n");
>
> - seq_puts(m, " Command Queuing: ");
> + seq_puts(m, "\n Command Queuing: ");
> for (i = 0; i <= ASC_MAX_TID; i++)
> seq_printf(m, " %c",
> (ep->use_cmd_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
> - seq_puts(m, "\n");
>
> - seq_puts(m, " Start Motor: ");
> + seq_puts(m, "\n Start Motor: ");
> for (i = 0; i <= ASC_MAX_TID; i++)
> seq_printf(m, " %c",
> (ep->start_motor & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
> - seq_puts(m, "\n");
>
> - seq_puts(m, " Synchronous Transfer:");
> + seq_puts(m, "\n Synchronous Transfer:");
> for (i = 0; i <= ASC_MAX_TID; i++)
> seq_printf(m, " %c",
> (ep->init_sdtr & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
> @@ -3410,10 +3403,9 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
> i,
> (v->use_tagged_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
> }
> - seq_puts(m, "\n");
>
> /* Current number of commands waiting for a device. */
> - seq_puts(m, " Command Queue Pending:");
> + seq_puts(m, "\n Command Queue Pending:");
> for (i = 0; i <= ASC_MAX_TID; i++) {
> if ((chip_scsi_id == i) ||
> ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
> @@ -3421,10 +3413,9 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
> }
> seq_printf(m, " %X:%u", i, v->cur_dvc_qng[i]);
> }
> - seq_puts(m, "\n");
>
> /* Current limit on number of commands that can be sent to a device. */
> - seq_puts(m, " Command Queue Limit:");
> + seq_puts(m, "\n Command Queue Limit:");
> for (i = 0; i <= ASC_MAX_TID; i++) {
> if ((chip_scsi_id == i) ||
> ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
> @@ -3432,10 +3423,9 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
> }
> seq_printf(m, " %X:%u", i, v->max_dvc_qng[i]);
> }
> - seq_puts(m, "\n");
>
> /* Indicate whether the device has returned queue full status. */
> - seq_puts(m, " Command Queue Full:");
> + seq_puts(m, "\n Command Queue Full:");
> for (i = 0; i <= ASC_MAX_TID; i++) {
> if ((chip_scsi_id == i) ||
> ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
> @@ -3447,9 +3437,8 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
> else
> seq_printf(m, " %X:N", i);
> }
> - seq_puts(m, "\n");
>
> - seq_puts(m, " Synchronous Transfer:");
> + seq_puts(m, "\n Synchronous Transfer:");
> for (i = 0; i <= ASC_MAX_TID; i++) {
> if ((chip_scsi_id == i) ||
> ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
> @@ -3555,9 +3544,8 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
> i,
> (tagqng_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
> }
> - seq_puts(m, "\n");
>
> - seq_puts(m, " Queue Limit:");
> + seq_puts(m, "\n Queue Limit:");
> for (i = 0; i <= ADV_MAX_TID; i++) {
> if ((chip_scsi_id == i) ||
> ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
> @@ -3569,9 +3557,8 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
>
> seq_printf(m, " %X:%d", i, lrambyte);
> }
> - seq_puts(m, "\n");
>
> - seq_puts(m, " Command Pending:");
> + seq_puts(m, "\n Command Pending:");
> for (i = 0; i <= ADV_MAX_TID; i++) {
> if ((chip_scsi_id == i) ||
> ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
> diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
> index 0b02467..0836433 100644
> --- a/drivers/scsi/atp870u.c
> +++ b/drivers/scsi/atp870u.c
> @@ -3101,9 +3101,8 @@ static const char *atp870u_info(struct Scsi_Host *notused)
>
> static int atp870u_show_info(struct seq_file *m, struct Scsi_Host *HBAptr)
> {
> - seq_puts(m, "ACARD AEC-671X Driver Version: 2.6+ac\n");
> - seq_puts(m, "\n");
> - seq_puts(m, "Adapter Configuration:\n");
> + seq_puts(m, "ACARD AEC-671X Driver Version: 2.6+ac\n\n"
> + "Adapter Configuration:\n");
> seq_printf(m, " Base IO: %#.4lx\n", HBAptr->io_port);
> seq_printf(m, " IRQ: %d\n", HBAptr->irq);
> return 0;
> diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
> index 3a55ea2..48c79f9 100644
> --- a/drivers/scsi/dc395x.c
> +++ b/drivers/scsi/dc395x.c
> @@ -4623,8 +4623,8 @@ static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host)
> unsigned long flags;
> int dev;
>
> - seq_puts(m, DC395X_BANNER " PCI SCSI Host Adapter\n");
> - seq_puts(m, " Driver Version " DC395X_VERSION "\n");
> + seq_puts(m, DC395X_BANNER " PCI SCSI Host Adapter\n"
> + " Driver Version " DC395X_VERSION "\n");
>
> DC395x_LOCK_IO(acb->scsi_host, flags);
>
> diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
> index bf883a6..acf558a 100644
> --- a/drivers/scsi/pcmcia/nsp_cs.c
> +++ b/drivers/scsi/pcmcia/nsp_cs.c
> @@ -1375,8 +1375,8 @@ static int nsp_show_info(struct seq_file *m, struct Scsi_Host *host)
> hostno = host->host_no;
> data = (nsp_hw_data *)host->hostdata;
>
> - seq_puts(m, "NinjaSCSI status\n\n");
> - seq_puts(m, "Driver version: $Revision: 1.23 $\n");
> + seq_puts(m, "NinjaSCSI status\n\n"
> + "Driver version: $Revision: 1.23 $\n");
> seq_printf(m, "SCSI host No.: %d\n", hostno);
> seq_printf(m, "IRQ: %d\n", host->irq);
> seq_printf(m, "IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
