From: Stephen Cameron <stephenmcameron@xxxxxxxxx>
Cleanup comments to be more specific. Make messages more
informational.
Reviewed-by: Scott Teel <scott.teel@xxxxxxxx>
Signed-off-by: Robert Elliott <elliott@xxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxx>
---
drivers/scsi/hpsa.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 08d96a9..5973018 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -5863,8 +5863,8 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
} else {
use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
if (use_doorbell) {
- dev_warn(&pdev->dev, "Soft reset not supported. "
- "Firmware update is required.\n");
+ dev_warn(&pdev->dev,
+ "Soft reset not supported. Firmware update is required.\n");
rc = -ENOTSUPP; /* try soft reset */
goto unmap_cfgtable;
}
@@ -5884,8 +5884,7 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_READY);
if (rc) {
dev_warn(&pdev->dev,
- "failed waiting for board to become ready "
- "after hard reset\n");
+ "Failed waiting for board to become ready after hard reset\n");
goto unmap_cfgtable;
}
@@ -5984,7 +5983,7 @@ static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
}
/* If MSI/MSI-X is supported by the kernel we will try to enable it on
- * controllers that are capable. If not, we use IO-APIC mode.
+ * controllers that are capable. If not, we use legacy INTx mode.
*/
static void hpsa_interrupt_mode(struct ctlr_info *h)
@@ -6003,7 +6002,7 @@ static void hpsa_interrupt_mode(struct ctlr_info *h)
(h->board_id == 0x40820E11) || (h->board_id == 0x40830E11))
goto default_int_mode;
if (pci_find_capability(h->pdev, PCI_CAP_ID_MSIX)) {
- dev_info(&h->pdev->dev, "MSIX\n");
+ dev_info(&h->pdev->dev, "MSI-X capable controller\n");
h->msix_vector = MAX_REPLY_QUEUES;
if (h->msix_vector > num_online_cpus())
h->msix_vector = num_online_cpus();
@@ -6024,7 +6023,7 @@ static void hpsa_interrupt_mode(struct ctlr_info *h)
}
single_msi_mode:
if (pci_find_capability(h->pdev, PCI_CAP_ID_MSI)) {
- dev_info(&h->pdev->dev, "MSI\n");
+ dev_info(&h->pdev->dev, "MSI capable controller\n");
if (!pci_enable_msi(h->pdev))
h->msi_vector = 1;
else
@@ -6209,7 +6208,7 @@ static void hpsa_find_board_params(struct ctlr_info *h)
static inline bool hpsa_CISS_signature_present(struct ctlr_info *h)
{
if (!check_signature(h->cfgtable->Signature, "CISS", 4)) {
- dev_warn(&h->pdev->dev, "not a valid CISS config table\n");
+ dev_err(&h->pdev->dev, "not a valid CISS config table\n");
return false;
}
return true;
@@ -6301,7 +6300,7 @@ static int hpsa_enter_simple_mode(struct ctlr_info *h)
h->transMethod = CFGTBL_Trans_Simple;
return 0;
error:
- dev_warn(&h->pdev->dev, "unable to get board into simple mode\n");
+ dev_err(&h->pdev->dev, "failed to enter simple mode\n");
return -ENODEV;
}
@@ -7282,8 +7281,8 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
hpsa_wait_for_mode_change_ack(h);
register_value = readl(&(h->cfgtable->TransportActive));
if (!(register_value & CFGTBL_Trans_Performant)) {
- dev_warn(&h->pdev->dev, "unable to get board into"
- " performant mode\n");
+ dev_err(&h->pdev->dev,
+ "performant mode problem - transport not active\n");
return;
}
/* Change the access methods to the performant access methods */
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
