Add power_status to SES device slot, so we can power on/off the
HDDs behind the enclosure.
Check firmware status in ses_set_* before sending control pages to
firmware.
Signed-off-by: Song Liu <songliubraving@xxxxxx>
Acked-by: Dan Williams <dan.j.williams@xxxxxxxxx>
Reviewed-by: Jens Axboe <axboe@xxxxxx>
Cc: Hannes Reinecke <hare@xxxxxxx>
---
drivers/misc/enclosure.c | 38 ++++++++++++++++++
drivers/scsi/ses.c | 98 ++++++++++++++++++++++++++++++++++++++++++-----
include/linux/enclosure.h | 6 +++
3 files changed, 133 insertions(+), 9 deletions(-)
diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index b7995ed..3289d4d 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -148,6 +148,7 @@ enclosure_register(struct device *dev, const char *name, int components,
for (i = 0; i < components; i++) {
edev->component[i].number = -1;
edev->component[i].slot = -1;
+ edev->component[i].power_status = 1;
}
mutex_lock(&container_list_lock);
@@ -583,6 +584,40 @@ static ssize_t set_component_locate(struct device *cdev,
return count;
}
+static ssize_t get_component_power_status(struct device *cdev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+ struct enclosure_component *ecomp = to_enclosure_component(cdev);
+
+ if (edev->cb->get_power_status)
+ edev->cb->get_power_status(edev, ecomp);
+ return snprintf(buf, 40, "%s\n", ecomp->power_status ? "on" : "off");
+}
+
+static ssize_t set_component_power_status(struct device *cdev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+ struct enclosure_component *ecomp = to_enclosure_component(cdev);
+ int val;
+
+ if (strncmp(buf, "on", 2) == 0 &&
+ (buf[2] == '\n' || buf[2] == '\0'))
+ val = 1;
+ else if (strncmp(buf, "off", 3) == 0 &&
+ (buf[3] == '\n' || buf[3] == '\0'))
+ val = 0;
+ else
+ return -EINVAL;
+
+ if (edev->cb->set_power_status)
+ edev->cb->set_power_status(edev, ecomp, val);
+ return count;
+}
+
static ssize_t get_component_type(struct device *cdev,
struct device_attribute *attr, char *buf)
{
@@ -614,6 +649,8 @@ static DEVICE_ATTR(active, S_IRUGO | S_IWUSR, get_component_active,
set_component_active);
static DEVICE_ATTR(locate, S_IRUGO | S_IWUSR, get_component_locate,
set_component_locate);
+static DEVICE_ATTR(power_status, S_IRUGO | S_IWUSR, get_component_power_status,
+ set_component_power_status);
static DEVICE_ATTR(type, S_IRUGO, get_component_type, NULL);
static DEVICE_ATTR(slot, S_IRUGO, get_component_slot, NULL);
@@ -622,6 +659,7 @@ static struct attribute *enclosure_component_attrs[] = {
&dev_attr_status.attr,
&dev_attr_active.attr,
&dev_attr_locate.attr,
+ &dev_attr_power_status.attr,
&dev_attr_type.attr,
&dev_attr_slot.attr,
NULL
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 433de8e..dcb0d76 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -67,6 +67,20 @@ static int ses_probe(struct device *dev)
#define SES_TIMEOUT (30 * HZ)
#define SES_RETRIES 3
+static void init_device_slot_control(unsigned char *dest_desc,
+ struct enclosure_component *ecomp,
+ unsigned char *status)
+{
+ memcpy(dest_desc, status, 4);
+ dest_desc[0] = 0;
+ /* only clear byte 1 for ENCLOSURE_COMPONENT_DEVICE */
+ if (ecomp->type == ENCLOSURE_COMPONENT_DEVICE)
+ dest_desc[1] = 0;
+ dest_desc[2] &= 0xde;
+ dest_desc[3] &= 0x3c;
+}
+
+
static int ses_recv_diag(struct scsi_device *sdev, int page_code,
void *buf, int bufflen)
{
@@ -178,14 +192,22 @@ static int ses_set_fault(struct enclosure_device *edev,
struct enclosure_component *ecomp,
enum enclosure_component_setting val)
{
- unsigned char desc[4] = {0 };
+ unsigned char desc[4];
+ unsigned char *desc_ptr;
+
+ desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+ if (!desc_ptr)
+ return -EIO;
+
+ init_device_slot_control(desc, ecomp, desc_ptr);
switch (val) {
case ENCLOSURE_SETTING_DISABLED:
- /* zero is disabled */
+ desc[3] &= 0xdf;
break;
case ENCLOSURE_SETTING_ENABLED:
- desc[3] = 0x20;
+ desc[3] |= 0x20;
break;
default:
/* SES doesn't do the SGPIO blink settings */
@@ -219,14 +241,22 @@ static int ses_set_locate(struct enclosure_device *edev,
struct enclosure_component *ecomp,
enum enclosure_component_setting val)
{
- unsigned char desc[4] = {0 };
+ unsigned char desc[4];
+ unsigned char *desc_ptr;
+
+ desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+ if (!desc_ptr)
+ return -EIO;
+
+ init_device_slot_control(desc, ecomp, desc_ptr);
switch (val) {
case ENCLOSURE_SETTING_DISABLED:
- /* zero is disabled */
+ desc[2] &= 0xfd;
break;
case ENCLOSURE_SETTING_ENABLED:
- desc[2] = 0x02;
+ desc[2] |= 0x02;
break;
default:
/* SES doesn't do the SGPIO blink settings */
@@ -239,15 +269,23 @@ static int ses_set_active(struct enclosure_device *edev,
struct enclosure_component *ecomp,
enum enclosure_component_setting val)
{
- unsigned char desc[4] = {0 };
+ unsigned char desc[4];
+ unsigned char *desc_ptr;
+
+ desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+ if (!desc_ptr)
+ return -EIO;
+
+ init_device_slot_control(desc, ecomp, desc_ptr);
switch (val) {
case ENCLOSURE_SETTING_DISABLED:
- /* zero is disabled */
+ desc[2] &= 0x7f;
ecomp->active = 0;
break;
case ENCLOSURE_SETTING_ENABLED:
- desc[2] = 0x80;
+ desc[2] |= 0x80;
ecomp->active = 1;
break;
default:
@@ -265,12 +303,53 @@ static int ses_show_id(struct enclosure_device *edev, char *buf)
return sprintf(buf, "%#llx\n", id);
}
+static void ses_get_power_status(struct enclosure_device *edev,
+ struct enclosure_component *ecomp)
+{
+ unsigned char *desc;
+
+ desc = ses_get_page2_descriptor(edev, ecomp);
+ if (desc)
+ ecomp->power_status = (desc[3] & 0x10) ? 0 : 1;
+}
+
+static int ses_set_power_status(struct enclosure_device *edev,
+ struct enclosure_component *ecomp,
+ int val)
+{
+ unsigned char desc[4];
+ unsigned char *desc_ptr;
+
+ desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+ if (!desc_ptr)
+ return -EIO;
+
+ init_device_slot_control(desc, ecomp, desc_ptr);
+
+ switch (val) {
+ /* power = 1 is device_off = 0 and vice versa */
+ case 0:
+ desc[3] |= 0x10;
+ break;
+ case 1:
+ desc[3] &= 0xef;
+ break;
+ default:
+ return -EINVAL;
+ }
+ ecomp->power_status = val;
+ return ses_set_page2_descriptor(edev, ecomp, desc);
+}
+
static struct enclosure_component_callbacks ses_enclosure_callbacks = {
.get_fault = ses_get_fault,
.set_fault = ses_set_fault,
.get_status = ses_get_status,
.get_locate = ses_get_locate,
.set_locate = ses_set_locate,
+ .get_power_status = ses_get_power_status,
+ .set_power_status = ses_set_power_status,
.set_active = ses_set_active,
.show_id = ses_show_id,
};
@@ -449,6 +528,7 @@ static void ses_enclosure_data_process(struct enclosure_device *edev,
ecomp = &edev->component[components++];
if (!IS_ERR(ecomp)) {
+ ses_get_power_status(edev, ecomp);
if (addl_desc_ptr)
ses_process_descriptor(
ecomp,
diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h
index 0f826c1..7be22da 100644
--- a/include/linux/enclosure.h
+++ b/include/linux/enclosure.h
@@ -79,6 +79,11 @@ struct enclosure_component_callbacks {
int (*set_locate)(struct enclosure_device *,
struct enclosure_component *,
enum enclosure_component_setting);
+ void (*get_power_status)(struct enclosure_device *,
+ struct enclosure_component *);
+ int (*set_power_status)(struct enclosure_device *,
+ struct enclosure_component *,
+ int);
int (*show_id)(struct enclosure_device *, char *buf);
};
@@ -94,6 +99,7 @@ struct enclosure_component {
int locate;
int slot;
enum enclosure_status status;
+ int power_status;
};
struct enclosure_device {
--
1.8.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
