The last time these SCSI asc/ascq codes were synced with T10
was 20130605. This patch is against lk 3.19.0-rc1 .
ChangeLog:
sync the SCSI ASC/ASCQ number to string tables with those
found at http://www.t10.org/lists/asc-num.txt dated
20141221
Signed-off-by: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
--- a/drivers/scsi/constants.c 2014-12-22 11:13:19.113270114 -0500
+++ b/drivers/scsi/constants.c 2014-12-23 10:30:08.799169226 -0500
@@ -392,7 +392,7 @@ struct error_info {
/*
* The canonical list of T10 Additional Sense Codes is available at:
- * http://www.t10.org/lists/asc-num.txt [most recent: 20130605]
+ * http://www.t10.org/lists/asc-num.txt [most recent: 20141221]
*/
static const struct error_info additional[] =
@@ -421,6 +421,7 @@ static const struct error_info additiona
{0x001E, "Conflicting SA creation request"},
{0x001F, "Logical unit transitioning to another power condition"},
{0x0020, "Extended copy information available"},
+ {0x0021, "Atomic command aborted due to ACA"},
{0x0100, "No index/sector signal"},
@@ -446,6 +447,7 @@ static const struct error_info additiona
{0x040C, "Logical unit not accessible, target port in unavailable "
"state"},
{0x040D, "Logical unit not ready, structure check required"},
+ {0x040E, "Logical unit not ready, security session in progress"},
{0x0410, "Logical unit not ready, auxiliary memory not accessible"},
{0x0411, "Logical unit not ready, notify (enable spinup) required"},
{0x0412, "Logical unit not ready, offline"},
@@ -462,6 +464,11 @@ static const struct error_info additiona
{0x041C, "Logical unit not ready, additional power use not yet "
"granted"},
{0x041D, "Logical unit not ready, configuration in progress"},
+ {0x041E, "Logical unit not ready, microcode activation required"},
+ {0x041F, "Logical unit not ready, microcode download required"},
+ {0x0420, "Logical unit not ready, logical unit reset required"},
+ {0x0421, "Logical unit not ready, hard reset required"},
+ {0x0422, "Logical unit not ready, power cycle required"},
{0x0500, "Logical unit does not respond to selection"},
@@ -480,6 +487,7 @@ static const struct error_info additiona
{0x0902, "Focus servo failure"},
{0x0903, "Spindle servo failure"},
{0x0904, "Head select fault"},
+ {0x0905, "Vibration induced tracking error"},
{0x0A00, "Error log overflow"},
@@ -510,6 +518,7 @@ static const struct error_info additiona
{0x0C0D, "Write error - not enough unsolicited data"},
{0x0C0E, "Multiple write errors"},
{0x0C0F, "Defects in error window"},
+ {0x0C10, "Incomplete multiple atomic write operations"},
{0x0D00, "Error detected by third party temporary initiator"},
{0x0D01, "Third party device failure"},
@@ -635,6 +644,10 @@ static const struct error_info additiona
{0x2101, "Invalid element address"},
{0x2102, "Invalid address for write"},
{0x2103, "Invalid write crossing layer jump"},
+ {0x2104, "Unaligned write command"},
+ {0x2105, "Write boundary violation"},
+ {0x2106, "Attempt to read invalid data"},
+ {0x2107, "Read boundary violation"},
{0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
@@ -691,6 +704,7 @@ static const struct error_info additiona
{0x2705, "Permanent write protect"},
{0x2706, "Conditional write protect"},
{0x2707, "Space allocation failed write protect"},
+ {0x2708, "Zone is read only"},
{0x2800, "Not ready to ready change, medium may have changed"},
{0x2801, "Import or export element accessed"},
@@ -743,10 +757,15 @@ static const struct error_info additiona
{0x2C0A, "Partition or collection contains user objects"},
{0x2C0B, "Not reserved"},
{0x2C0C, "Orwrite generation does not match"},
+ {0x2C0D, "Reset write pointer not allowed"},
+ {0x2C0E, "Zone is offline"},
{0x2D00, "Overwrite error on update in place"},
{0x2E00, "Insufficient time for operation"},
+ {0x2E01, "Command timeout before processing"},
+ {0x2E02, "Command timeout during processing"},
+ {0x2E03, "Command timeout during processing due to error recovery"},
{0x2F00, "Commands cleared by another initiator"},
{0x2F01, "Commands cleared by power loss notification"},
@@ -868,6 +887,7 @@ static const struct error_info additiona
{0x3F13, "iSCSI IP address removed"},
{0x3F14, "iSCSI IP address changed"},
{0x3F15, "Inspect referrals sense descriptors"},
+ {0x3F16, "Microcode has been changed without reset"},
/*
* {0x40NN, "Ram failure"},
* {0x40NN, "Diagnostic failure on component nn"},
@@ -946,6 +966,11 @@ static const struct error_info additiona
{0x5306, "Volume identifier missing"},
{0x5307, "Duplicate volume identifier"},
{0x5308, "Element status unknown"},
+ {0x5309, "Data transfer device error - load failed"},
+ {0x530a, "Data transfer device error - unload failed"},
+ {0x530b, "Data transfer device error - unload missing"},
+ {0x530c, "Data transfer device error - eject failed"},
+ {0x530d, "Data transfer device error - library communication failed"},
{0x5400, "Scsi to host system interface failure"},
@@ -963,6 +988,7 @@ static const struct error_info additiona
{0x550B, "Insufficient power for operation"},
{0x550C, "Insufficient resources to create rod"},
{0x550D, "Insufficient resources to create rod token"},
+ {0x550E, "Insufficient zone resources"},
{0x5700, "Unable to recover table-of-contents"},
