The macro SPRINTF doesn't save a lot of typing or make the code more
readable, and depending on a specific identifier (m) in the
surrounding scope is generally frowned upon. Nuke it.
Signed-off-by: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
---
drivers/scsi/NCR5380.c | 20 ++-
drivers/scsi/aha152x.c | 295 +++++++++++++++++++++----------------------
drivers/scsi/dc395x.c | 78 ++++++------
drivers/scsi/nsp32.c | 41 +++---
drivers/scsi/pcmcia/nsp_cs.c | 50 ++++----
drivers/scsi/wd7000.c | 41 +++---
6 files changed, 252 insertions(+), 273 deletions(-)
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 36244d6..aca181e 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -716,8 +716,6 @@ static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance,
}
#endif
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m, ## args)
static
void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m);
static
@@ -734,19 +732,19 @@ static int __maybe_unused NCR5380_show_info(struct seq_file *m,
hostdata = (struct NCR5380_hostdata *) instance->hostdata;
#ifdef PSEUDO_DMA
- SPRINTF("Highwater I/O busy spin counts: write %d, read %d\n",
+ seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n",
hostdata->spin_max_w, hostdata->spin_max_r);
#endif
spin_lock_irq(instance->host_lock);
if (!hostdata->connected)
- SPRINTF("scsi%d: no currently connected command\n", instance->host_no);
+ seq_printf(m, "scsi%d: no currently connected command\n", instance->host_no);
else
lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m);
- SPRINTF("scsi%d: issue_queue\n", instance->host_no);
+ seq_printf(m, "scsi%d: issue_queue\n", instance->host_no);
for (ptr = (struct scsi_cmnd *) hostdata->issue_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble)
lprint_Scsi_Cmnd(ptr, m);
- SPRINTF("scsi%d: disconnected_queue\n", instance->host_no);
+ seq_printf(m, "scsi%d: disconnected_queue\n", instance->host_no);
for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble)
lprint_Scsi_Cmnd(ptr, m);
spin_unlock_irq(instance->host_lock);
@@ -755,8 +753,8 @@ static int __maybe_unused NCR5380_show_info(struct seq_file *m,
static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m)
{
- SPRINTF("scsi%d : destination target %d, lun %llu\n", cmd->device->host->host_no, cmd->device->id, cmd->device->lun);
- SPRINTF(" command = ");
+ seq_printf(m, "scsi%d : destination target %d, lun %llu\n", cmd->device->host->host_no, cmd->device->id, cmd->device->lun);
+ seq_printf(m, " command = ");
lprint_command(cmd->cmnd, m);
}
@@ -765,13 +763,13 @@ static void lprint_command(unsigned char *command, struct seq_file *m)
int i, s;
lprint_opcode(command[0], m);
for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- SPRINTF("%02x ", command[i]);
- SPRINTF("\n");
+ seq_printf(m, "%02x ", command[i]);
+ seq_printf(m, "\n");
}
static void lprint_opcode(int opcode, struct seq_file *m)
{
- SPRINTF("%2d (0x%02x)", opcode, opcode);
+ seq_printf(m, "%2d (0x%02x)", opcode, opcode);
}
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 2b960b3..f14ad8a 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -2490,299 +2490,296 @@ static void show_queues(struct Scsi_Host *shpnt)
disp_enintr(shpnt);
}
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m, ##args)
-
static void get_command(struct seq_file *m, Scsi_Cmnd * ptr)
{
int i;
- SPRINTF("%p: target=%d; lun=%d; cmnd=( ",
+ seq_printf(m, "%p: target=%d; lun=%d; cmnd=( ",
ptr, ptr->device->id, (u8)ptr->device->lun);
for (i = 0; i < COMMAND_SIZE(ptr->cmnd[0]); i++)
- SPRINTF("0x%02x ", ptr->cmnd[i]);
+ seq_printf(m, "0x%02x ", ptr->cmnd[i]);
- SPRINTF("); resid=%d; residual=%d; buffers=%d; phase |",
+ seq_printf(m, "); resid=%d; residual=%d; buffers=%d; phase |",
scsi_get_resid(ptr), ptr->SCp.this_residual,
ptr->SCp.buffers_residual);
if (ptr->SCp.phase & not_issued)
- SPRINTF("not issued|");
+ seq_printf(m, "not issued|");
if (ptr->SCp.phase & selecting)
- SPRINTF("selecting|");
+ seq_printf(m, "selecting|");
if (ptr->SCp.phase & disconnected)
- SPRINTF("disconnected|");
+ seq_printf(m, "disconnected|");
if (ptr->SCp.phase & aborted)
- SPRINTF("aborted|");
+ seq_printf(m, "aborted|");
if (ptr->SCp.phase & identified)
- SPRINTF("identified|");
+ seq_printf(m, "identified|");
if (ptr->SCp.phase & completed)
- SPRINTF("completed|");
+ seq_printf(m, "completed|");
if (ptr->SCp.phase & spiordy)
- SPRINTF("spiordy|");
+ seq_printf(m, "spiordy|");
if (ptr->SCp.phase & syncneg)
- SPRINTF("syncneg|");
- SPRINTF("; next=0x%p\n", SCNEXT(ptr));
+ seq_printf(m, "syncneg|");
+ seq_printf(m, "; next=0x%p\n", SCNEXT(ptr));
}
static void get_ports(struct seq_file *m, struct Scsi_Host *shpnt)
{
int s;
- SPRINTF("\n%s: %s(%s) ", CURRENT_SC ? "on bus" : "waiting", states[STATE].name, states[PREVSTATE].name);
+ seq_printf(m, "\n%s: %s(%s) ", CURRENT_SC ? "on bus" : "waiting", states[STATE].name, states[PREVSTATE].name);
s = GETPORT(SCSISEQ);
- SPRINTF("SCSISEQ( ");
+ seq_printf(m, "SCSISEQ( ");
if (s & TEMODEO)
- SPRINTF("TARGET MODE ");
+ seq_printf(m, "TARGET MODE ");
if (s & ENSELO)
- SPRINTF("SELO ");
+ seq_printf(m, "SELO ");
if (s & ENSELI)
- SPRINTF("SELI ");
+ seq_printf(m, "SELI ");
if (s & ENRESELI)
- SPRINTF("RESELI ");
+ seq_printf(m, "RESELI ");
if (s & ENAUTOATNO)
- SPRINTF("AUTOATNO ");
+ seq_printf(m, "AUTOATNO ");
if (s & ENAUTOATNI)
- SPRINTF("AUTOATNI ");
+ seq_printf(m, "AUTOATNI ");
if (s & ENAUTOATNP)
- SPRINTF("AUTOATNP ");
+ seq_printf(m, "AUTOATNP ");
if (s & SCSIRSTO)
- SPRINTF("SCSIRSTO ");
- SPRINTF(");");
+ seq_printf(m, "SCSIRSTO ");
+ seq_printf(m, ");");
- SPRINTF(" SCSISIG(");
+ seq_printf(m, " SCSISIG(");
s = GETPORT(SCSISIG);
switch (s & P_MASK) {
case P_DATAO:
- SPRINTF("DATA OUT");
+ seq_printf(m, "DATA OUT");
break;
case P_DATAI:
- SPRINTF("DATA IN");
+ seq_printf(m, "DATA IN");
break;
case P_CMD:
- SPRINTF("COMMAND");
+ seq_printf(m, "COMMAND");
break;
case P_STATUS:
- SPRINTF("STATUS");
+ seq_printf(m, "STATUS");
break;
case P_MSGO:
- SPRINTF("MESSAGE OUT");
+ seq_printf(m, "MESSAGE OUT");
break;
case P_MSGI:
- SPRINTF("MESSAGE IN");
+ seq_printf(m, "MESSAGE IN");
break;
default:
- SPRINTF("*invalid*");
+ seq_printf(m, "*invalid*");
break;
}
- SPRINTF("); ");
+ seq_printf(m, "); ");
- SPRINTF("INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
+ seq_printf(m, "INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
- SPRINTF("SSTAT( ");
+ seq_printf(m, "SSTAT( ");
s = GETPORT(SSTAT0);
if (s & TARGET)
- SPRINTF("TARGET ");
+ seq_printf(m, "TARGET ");
if (s & SELDO)
- SPRINTF("SELDO ");
+ seq_printf(m, "SELDO ");
if (s & SELDI)
- SPRINTF("SELDI ");
+ seq_printf(m, "SELDI ");
if (s & SELINGO)
- SPRINTF("SELINGO ");
+ seq_printf(m, "SELINGO ");
if (s & SWRAP)
- SPRINTF("SWRAP ");
+ seq_printf(m, "SWRAP ");
if (s & SDONE)
- SPRINTF("SDONE ");
+ seq_printf(m, "SDONE ");
if (s & SPIORDY)
- SPRINTF("SPIORDY ");
+ seq_printf(m, "SPIORDY ");
if (s & DMADONE)
- SPRINTF("DMADONE ");
+ seq_printf(m, "DMADONE ");
s = GETPORT(SSTAT1);
if (s & SELTO)
- SPRINTF("SELTO ");
+ seq_printf(m, "SELTO ");
if (s & ATNTARG)
- SPRINTF("ATNTARG ");
+ seq_printf(m, "ATNTARG ");
if (s & SCSIRSTI)
- SPRINTF("SCSIRSTI ");
+ seq_printf(m, "SCSIRSTI ");
if (s & PHASEMIS)
- SPRINTF("PHASEMIS ");
+ seq_printf(m, "PHASEMIS ");
if (s & BUSFREE)
- SPRINTF("BUSFREE ");
+ seq_printf(m, "BUSFREE ");
if (s & SCSIPERR)
- SPRINTF("SCSIPERR ");
+ seq_printf(m, "SCSIPERR ");
if (s & PHASECHG)
- SPRINTF("PHASECHG ");
+ seq_printf(m, "PHASECHG ");
if (s & REQINIT)
- SPRINTF("REQINIT ");
- SPRINTF("); ");
+ seq_printf(m, "REQINIT ");
+ seq_printf(m, "); ");
- SPRINTF("SSTAT( ");
+ seq_printf(m, "SSTAT( ");
s = GETPORT(SSTAT0) & GETPORT(SIMODE0);
if (s & TARGET)
- SPRINTF("TARGET ");
+ seq_printf(m, "TARGET ");
if (s & SELDO)
- SPRINTF("SELDO ");
+ seq_printf(m, "SELDO ");
if (s & SELDI)
- SPRINTF("SELDI ");
+ seq_printf(m, "SELDI ");
if (s & SELINGO)
- SPRINTF("SELINGO ");
+ seq_printf(m, "SELINGO ");
if (s & SWRAP)
- SPRINTF("SWRAP ");
+ seq_printf(m, "SWRAP ");
if (s & SDONE)
- SPRINTF("SDONE ");
+ seq_printf(m, "SDONE ");
if (s & SPIORDY)
- SPRINTF("SPIORDY ");
+ seq_printf(m, "SPIORDY ");
if (s & DMADONE)
- SPRINTF("DMADONE ");
+ seq_printf(m, "DMADONE ");
s = GETPORT(SSTAT1) & GETPORT(SIMODE1);
if (s & SELTO)
- SPRINTF("SELTO ");
+ seq_printf(m, "SELTO ");
if (s & ATNTARG)
- SPRINTF("ATNTARG ");
+ seq_printf(m, "ATNTARG ");
if (s & SCSIRSTI)
- SPRINTF("SCSIRSTI ");
+ seq_printf(m, "SCSIRSTI ");
if (s & PHASEMIS)
- SPRINTF("PHASEMIS ");
+ seq_printf(m, "PHASEMIS ");
if (s & BUSFREE)
- SPRINTF("BUSFREE ");
+ seq_printf(m, "BUSFREE ");
if (s & SCSIPERR)
- SPRINTF("SCSIPERR ");
+ seq_printf(m, "SCSIPERR ");
if (s & PHASECHG)
- SPRINTF("PHASECHG ");
+ seq_printf(m, "PHASECHG ");
if (s & REQINIT)
- SPRINTF("REQINIT ");
- SPRINTF("); ");
+ seq_printf(m, "REQINIT ");
+ seq_printf(m, "); ");
- SPRINTF("SXFRCTL0( ");
+ seq_printf(m, "SXFRCTL0( ");
s = GETPORT(SXFRCTL0);
if (s & SCSIEN)
- SPRINTF("SCSIEN ");
+ seq_printf(m, "SCSIEN ");
if (s & DMAEN)
- SPRINTF("DMAEN ");
+ seq_printf(m, "DMAEN ");
if (s & CH1)
- SPRINTF("CH1 ");
+ seq_printf(m, "CH1 ");
if (s & CLRSTCNT)
- SPRINTF("CLRSTCNT ");
+ seq_printf(m, "CLRSTCNT ");
if (s & SPIOEN)
- SPRINTF("SPIOEN ");
+ seq_printf(m, "SPIOEN ");
if (s & CLRCH1)
- SPRINTF("CLRCH1 ");
- SPRINTF("); ");
+ seq_printf(m, "CLRCH1 ");
+ seq_printf(m, "); ");
- SPRINTF("SIGNAL( ");
+ seq_printf(m, "SIGNAL( ");
s = GETPORT(SCSISIG);
if (s & SIG_ATNI)
- SPRINTF("ATNI ");
+ seq_printf(m, "ATNI ");
if (s & SIG_SELI)
- SPRINTF("SELI ");
+ seq_printf(m, "SELI ");
if (s & SIG_BSYI)
- SPRINTF("BSYI ");
+ seq_printf(m, "BSYI ");
if (s & SIG_REQI)
- SPRINTF("REQI ");
+ seq_printf(m, "REQI ");
if (s & SIG_ACKI)
- SPRINTF("ACKI ");
- SPRINTF("); ");
+ seq_printf(m, "ACKI ");
+ seq_printf(m, "); ");
- SPRINTF("SELID(%02x), ", GETPORT(SELID));
+ seq_printf(m, "SELID(%02x), ", GETPORT(SELID));
- SPRINTF("STCNT(%d), ", GETSTCNT());
+ seq_printf(m, "STCNT(%d), ", GETSTCNT());
- SPRINTF("SSTAT2( ");
+ seq_printf(m, "SSTAT2( ");
s = GETPORT(SSTAT2);
if (s & SOFFSET)
- SPRINTF("SOFFSET ");
+ seq_printf(m, "SOFFSET ");
if (s & SEMPTY)
- SPRINTF("SEMPTY ");
+ seq_printf(m, "SEMPTY ");
if (s & SFULL)
- SPRINTF("SFULL ");
- SPRINTF("); SFCNT (%d); ", s & (SFULL | SFCNT));
+ seq_printf(m, "SFULL ");
+ seq_printf(m, "); SFCNT (%d); ", s & (SFULL | SFCNT));
s = GETPORT(SSTAT3);
- SPRINTF("SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f);
+ seq_printf(m, "SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f);
- SPRINTF("SSTAT4( ");
+ seq_printf(m, "SSTAT4( ");
s = GETPORT(SSTAT4);
if (s & SYNCERR)
- SPRINTF("SYNCERR ");
+ seq_printf(m, "SYNCERR ");
if (s & FWERR)
- SPRINTF("FWERR ");
+ seq_printf(m, "FWERR ");
if (s & FRERR)
- SPRINTF("FRERR ");
- SPRINTF("); ");
+ seq_printf(m, "FRERR ");
+ seq_printf(m, "); ");
- SPRINTF("DMACNTRL0( ");
+ seq_printf(m, "DMACNTRL0( ");
s = GETPORT(DMACNTRL0);
- SPRINTF("%s ", s & _8BIT ? "8BIT" : "16BIT");
- SPRINTF("%s ", s & DMA ? "DMA" : "PIO");
- SPRINTF("%s ", s & WRITE_READ ? "WRITE" : "READ");
+ seq_printf(m, "%s ", s & _8BIT ? "8BIT" : "16BIT");
+ seq_printf(m, "%s ", s & DMA ? "DMA" : "PIO");
+ seq_printf(m, "%s ", s & WRITE_READ ? "WRITE" : "READ");
if (s & ENDMA)
- SPRINTF("ENDMA ");
+ seq_printf(m, "ENDMA ");
if (s & INTEN)
- SPRINTF("INTEN ");
+ seq_printf(m, "INTEN ");
if (s & RSTFIFO)
- SPRINTF("RSTFIFO ");
+ seq_printf(m, "RSTFIFO ");
if (s & SWINT)
- SPRINTF("SWINT ");
- SPRINTF("); ");
+ seq_printf(m, "SWINT ");
+ seq_printf(m, "); ");
- SPRINTF("DMASTAT( ");
+ seq_printf(m, "DMASTAT( ");
s = GETPORT(DMASTAT);
if (s & ATDONE)
- SPRINTF("ATDONE ");
+ seq_printf(m, "ATDONE ");
if (s & WORDRDY)
- SPRINTF("WORDRDY ");
+ seq_printf(m, "WORDRDY ");
if (s & DFIFOFULL)
- SPRINTF("DFIFOFULL ");
+ seq_printf(m, "DFIFOFULL ");
if (s & DFIFOEMP)
- SPRINTF("DFIFOEMP ");
- SPRINTF(")\n");
+ seq_printf(m, "DFIFOEMP ");
+ seq_printf(m, ")\n");
- SPRINTF("enabled interrupts( ");
+ seq_printf(m, "enabled interrupts( ");
s = GETPORT(SIMODE0);
if (s & ENSELDO)
- SPRINTF("ENSELDO ");
+ seq_printf(m, "ENSELDO ");
if (s & ENSELDI)
- SPRINTF("ENSELDI ");
+ seq_printf(m, "ENSELDI ");
if (s & ENSELINGO)
- SPRINTF("ENSELINGO ");
+ seq_printf(m, "ENSELINGO ");
if (s & ENSWRAP)
- SPRINTF("ENSWRAP ");
+ seq_printf(m, "ENSWRAP ");
if (s & ENSDONE)
- SPRINTF("ENSDONE ");
+ seq_printf(m, "ENSDONE ");
if (s & ENSPIORDY)
- SPRINTF("ENSPIORDY ");
+ seq_printf(m, "ENSPIORDY ");
if (s & ENDMADONE)
- SPRINTF("ENDMADONE ");
+ seq_printf(m, "ENDMADONE ");
s = GETPORT(SIMODE1);
if (s & ENSELTIMO)
- SPRINTF("ENSELTIMO ");
+ seq_printf(m, "ENSELTIMO ");
if (s & ENATNTARG)
- SPRINTF("ENATNTARG ");
+ seq_printf(m, "ENATNTARG ");
if (s & ENPHASEMIS)
- SPRINTF("ENPHASEMIS ");
+ seq_printf(m, "ENPHASEMIS ");
if (s & ENBUSFREE)
- SPRINTF("ENBUSFREE ");
+ seq_printf(m, "ENBUSFREE ");
if (s & ENSCSIPERR)
- SPRINTF("ENSCSIPERR ");
+ seq_printf(m, "ENSCSIPERR ");
if (s & ENPHASECHG)
- SPRINTF("ENPHASECHG ");
+ seq_printf(m, "ENPHASECHG ");
if (s & ENREQINIT)
- SPRINTF("ENREQINIT ");
- SPRINTF(")\n");
+ seq_printf(m, "ENREQINIT ");
+ seq_printf(m, ")\n");
}
static int aha152x_set_info(struct Scsi_Host *shpnt, char *buffer, int length)
@@ -2825,56 +2822,56 @@ static int aha152x_show_info(struct seq_file *m, struct Scsi_Host *shpnt)
Scsi_Cmnd *ptr;
unsigned long flags;
- SPRINTF(AHA152X_REVID "\n");
+ seq_printf(m, AHA152X_REVID "\n");
- SPRINTF("ioports 0x%04lx to 0x%04lx\n",
+ seq_printf(m, "ioports 0x%04lx to 0x%04lx\n",
shpnt->io_port, shpnt->io_port + shpnt->n_io_port - 1);
- SPRINTF("interrupt 0x%02x\n", shpnt->irq);
- SPRINTF("disconnection/reconnection %s\n",
+ seq_printf(m, "interrupt 0x%02x\n", shpnt->irq);
+ seq_printf(m, "disconnection/reconnection %s\n",
RECONNECT ? "enabled" : "disabled");
- SPRINTF("parity checking %s\n",
+ seq_printf(m, "parity checking %s\n",
PARITY ? "enabled" : "disabled");
- SPRINTF("synchronous transfers %s\n",
+ seq_printf(m, "synchronous transfers %s\n",
SYNCHRONOUS ? "enabled" : "disabled");
- SPRINTF("%d commands currently queued\n", HOSTDATA(shpnt)->commands);
+ seq_printf(m, "%d commands currently queued\n", HOSTDATA(shpnt)->commands);
if(SYNCHRONOUS) {
- SPRINTF("synchronously operating targets (tick=50 ns):\n");
+ seq_printf(m, "synchronously operating targets (tick=50 ns):\n");
for (i = 0; i < 8; i++)
if (HOSTDATA(shpnt)->syncrate[i] & 0x7f)
- SPRINTF("target %d: period %dT/%dns; req/ack offset %d\n",
+ seq_printf(m, "target %d: period %dT/%dns; req/ack offset %d\n",
i,
(((HOSTDATA(shpnt)->syncrate[i] & 0x70) >> 4) + 2),
(((HOSTDATA(shpnt)->syncrate[i] & 0x70) >> 4) + 2) * 50,
HOSTDATA(shpnt)->syncrate[i] & 0x0f);
}
- SPRINTF("\nqueue status:\n");
+ seq_printf(m, "\nqueue status:\n");
DO_LOCK(flags);
if (ISSUE_SC) {
- SPRINTF("not yet issued commands:\n");
+ seq_printf(m, "not yet issued commands:\n");
for (ptr = ISSUE_SC; ptr; ptr = SCNEXT(ptr))
get_command(m, ptr);
} else
- SPRINTF("no not yet issued commands\n");
+ seq_printf(m, "no not yet issued commands\n");
DO_UNLOCK(flags);
if (CURRENT_SC) {
- SPRINTF("current command:\n");
+ seq_printf(m, "current command:\n");
get_command(m, CURRENT_SC);
} else
- SPRINTF("no current command\n");
+ seq_printf(m, "no current command\n");
if (DISCONNECTED_SC) {
- SPRINTF("disconnected commands:\n");
+ seq_printf(m, "disconnected commands:\n");
for (ptr = DISCONNECTED_SC; ptr; ptr = SCNEXT(ptr))
get_command(m, ptr);
} else
- SPRINTF("no disconnected commands\n");
+ seq_printf(m, "no disconnected commands\n");
get_ports(m, shpnt);
#if defined(AHA152X_STAT)
- SPRINTF("statistics:\n"
+ seq_printf(m, "statistics:\n"
"total commands: %d\n"
"disconnections: %d\n"
"busfree with check condition: %d\n"
@@ -2894,7 +2891,7 @@ static int aha152x_show_info(struct seq_file *m, struct Scsi_Host *shpnt)
HOSTDATA(shpnt)->busfree_without_done_command,
HOSTDATA(shpnt)->busfree_without_any_action);
for(i=0; i<maxstate; i++) {
- SPRINTF("%-10s %-12d %-12d %-12ld\n",
+ seq_printf(m, "%-10s %-12d %-12d %-12ld\n",
states[i].name,
HOSTDATA(shpnt)->count_trans[i],
HOSTDATA(shpnt)->count[i],
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 0c6be0a..0a1ed50 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -4610,13 +4610,10 @@ static void adapter_uninit(struct AdapterCtlBlk *acb)
}
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m,##args)
-
#undef YESNO
#define YESNO(YN) \
- if (YN) SPRINTF(" Yes ");\
- else SPRINTF(" No ")
+ if (YN) seq_printf(m, " Yes ");\
+ else seq_printf(m, " No ")
static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host)
{
@@ -4626,47 +4623,44 @@ static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host)
unsigned long flags;
int dev;
- SPRINTF(DC395X_BANNER " PCI SCSI Host Adapter\n");
- SPRINTF(" Driver Version " DC395X_VERSION "\n");
+ seq_printf(m, DC395X_BANNER " PCI SCSI Host Adapter\n");
+ seq_printf(m, " Driver Version " DC395X_VERSION "\n");
DC395x_LOCK_IO(acb->scsi_host, flags);
- SPRINTF("SCSI Host Nr %i, ", host->host_no);
- SPRINTF("DC395U/UW/F DC315/U %s\n",
+ seq_printf(m, "SCSI Host Nr %i, ", host->host_no);
+ seq_printf(m, "DC395U/UW/F DC315/U %s\n",
(acb->config & HCC_WIDE_CARD) ? "Wide" : "");
- SPRINTF("io_port_base 0x%04lx, ", acb->io_port_base);
- SPRINTF("irq_level 0x%04x, ", acb->irq_level);
- SPRINTF(" SelTimeout %ims\n", (1638 * acb->sel_timeout) / 1000);
+ seq_printf(m, "io_port_base 0x%04lx, ", acb->io_port_base);
+ seq_printf(m, "irq_level 0x%04x, ", acb->irq_level);
+ seq_printf(m, " SelTimeout %ims\n", (1638 * acb->sel_timeout) / 1000);
- SPRINTF("MaxID %i, MaxLUN %llu, ", host->max_id, host->max_lun);
- SPRINTF("AdapterID %i\n", host->this_id);
+ seq_printf(m, "MaxID %i, MaxLUN %llu, ", host->max_id, host->max_lun);
+ seq_printf(m, "AdapterID %i\n", host->this_id);
- SPRINTF("tag_max_num %i", acb->tag_max_num);
- /*SPRINTF(", DMA_Status %i\n", DC395x_read8(acb, TRM_S1040_DMA_STATUS)); */
- SPRINTF(", FilterCfg 0x%02x",
+ seq_printf(m, "tag_max_num %i", acb->tag_max_num);
+ /*seq_printf(m, ", DMA_Status %i\n", DC395x_read8(acb, TRM_S1040_DMA_STATUS)); */
+ seq_printf(m, ", FilterCfg 0x%02x",
DC395x_read8(acb, TRM_S1040_SCSI_CONFIG1));
- SPRINTF(", DelayReset %is\n", acb->eeprom.delay_time);
- /*SPRINTF("\n"); */
+ seq_printf(m, ", DelayReset %is\n", acb->eeprom.delay_time);
+ /*seq_printf(m, "\n"); */
- SPRINTF("Nr of DCBs: %i\n", list_size(&acb->dcb_list));
- SPRINTF
- ("Map of attached LUNs: %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ seq_printf(m, "Nr of DCBs: %i\n", list_size(&acb->dcb_list));
+ seq_printf(m, "Map of attached LUNs: %02x %02x %02x %02x %02x %02x %02x %02x\n",
acb->dcb_map[0], acb->dcb_map[1], acb->dcb_map[2],
acb->dcb_map[3], acb->dcb_map[4], acb->dcb_map[5],
acb->dcb_map[6], acb->dcb_map[7]);
- SPRINTF
- (" %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ seq_printf(m, " %02x %02x %02x %02x %02x %02x %02x %02x\n",
acb->dcb_map[8], acb->dcb_map[9], acb->dcb_map[10],
acb->dcb_map[11], acb->dcb_map[12], acb->dcb_map[13],
acb->dcb_map[14], acb->dcb_map[15]);
- SPRINTF
- ("Un ID LUN Prty Sync Wide DsCn SndS TagQ nego_period SyncFreq SyncOffs MaxCmd\n");
+ seq_printf(m, "Un ID LUN Prty Sync Wide DsCn SndS TagQ nego_period SyncFreq SyncOffs MaxCmd\n");
dev = 0;
list_for_each_entry(dcb, &acb->dcb_list, list) {
int nego_period;
- SPRINTF("%02i %02i %02i ", dev, dcb->target_id,
+ seq_printf(m, "%02i %02i %02i ", dev, dcb->target_id,
dcb->target_lun);
YESNO(dcb->dev_mode & NTC_DO_PARITY_CHK);
YESNO(dcb->sync_offset);
@@ -4676,53 +4670,53 @@ static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host)
YESNO(dcb->sync_mode & EN_TAG_QUEUEING);
nego_period = clock_period[dcb->sync_period & 0x07] << 2;
if (dcb->sync_offset)
- SPRINTF(" %03i ns ", nego_period);
+ seq_printf(m, " %03i ns ", nego_period);
else
- SPRINTF(" (%03i ns)", (dcb->min_nego_period << 2));
+ seq_printf(m, " (%03i ns)", (dcb->min_nego_period << 2));
if (dcb->sync_offset & 0x0f) {
spd = 1000 / (nego_period);
spd1 = 1000 % (nego_period);
spd1 = (spd1 * 10 + nego_period / 2) / (nego_period);
- SPRINTF(" %2i.%1i M %02i ", spd, spd1,
+ seq_printf(m, " %2i.%1i M %02i ", spd, spd1,
(dcb->sync_offset & 0x0f));
} else
- SPRINTF(" ");
+ seq_printf(m, " ");
/* Add more info ... */
- SPRINTF(" %02i\n", dcb->max_command);
+ seq_printf(m, " %02i\n", dcb->max_command);
dev++;
}
if (timer_pending(&acb->waiting_timer))
- SPRINTF("Waiting queue timer running\n");
+ seq_printf(m, "Waiting queue timer running\n");
else
- SPRINTF("\n");
+ seq_printf(m, "\n");
list_for_each_entry(dcb, &acb->dcb_list, list) {
struct ScsiReqBlk *srb;
if (!list_empty(&dcb->srb_waiting_list))
- SPRINTF("DCB (%02i-%i): Waiting: %i:",
+ seq_printf(m, "DCB (%02i-%i): Waiting: %i:",
dcb->target_id, dcb->target_lun,
list_size(&dcb->srb_waiting_list));
list_for_each_entry(srb, &dcb->srb_waiting_list, list)
- SPRINTF(" %p", srb->cmd);
+ seq_printf(m, " %p", srb->cmd);
if (!list_empty(&dcb->srb_going_list))
- SPRINTF("\nDCB (%02i-%i): Going : %i:",
+ seq_printf(m, "\nDCB (%02i-%i): Going : %i:",
dcb->target_id, dcb->target_lun,
list_size(&dcb->srb_going_list));
list_for_each_entry(srb, &dcb->srb_going_list, list)
- SPRINTF(" %p", srb->cmd);
+ seq_printf(m, " %p", srb->cmd);
if (!list_empty(&dcb->srb_waiting_list) || !list_empty(&dcb->srb_going_list))
- SPRINTF("\n");
+ seq_printf(m, "\n");
}
if (debug_enabled(DBG_1)) {
- SPRINTF("DCB list for ACB %p:\n", acb);
+ seq_printf(m, "DCB list for ACB %p:\n", acb);
list_for_each_entry(dcb, &acb->dcb_list, list) {
- SPRINTF("%p -> ", dcb);
+ seq_printf(m, "%p -> ", dcb);
}
- SPRINTF("END\n");
+ seq_printf(m, "END\n");
}
DC395x_UNLOCK_IO(acb->scsi_host, flags);
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 90abb03..3e77551 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -1441,8 +1441,6 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
return IRQ_RETVAL(handled);
}
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m, ##args)
static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host)
{
@@ -1458,64 +1456,63 @@ static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host)
data = (nsp32_hw_data *)host->hostdata;
base = host->io_port;
- SPRINTF("NinjaSCSI-32 status\n\n");
- SPRINTF("Driver version: %s, $Revision: 1.33 $\n", nsp32_release_version);
- SPRINTF("SCSI host No.: %d\n", hostno);
- SPRINTF("IRQ: %d\n", host->irq);
- SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
- SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
- SPRINTF("sg_tablesize: %d\n", host->sg_tablesize);
- SPRINTF("Chip revision: 0x%x\n", (nsp32_read2(base, INDEX_REG) >> 8) & 0xff);
+ seq_printf(m, "NinjaSCSI-32 status\n\n");
+ seq_printf(m, "Driver version: %s, $Revision: 1.33 $\n", nsp32_release_version);
+ seq_printf(m, "SCSI host No.: %d\n", hostno);
+ seq_printf(m, "IRQ: %d\n", host->irq);
+ seq_printf(m, "IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
+ seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
+ seq_printf(m, "sg_tablesize: %d\n", host->sg_tablesize);
+ seq_printf(m, "Chip revision: 0x%x\n", (nsp32_read2(base, INDEX_REG) >> 8) & 0xff);
mode_reg = nsp32_index_read1(base, CHIP_MODE);
model = data->pci_devid->driver_data;
#ifdef CONFIG_PM
- SPRINTF("Power Management: %s\n", (mode_reg & OPTF) ? "yes" : "no");
+ seq_printf(m, "Power Management: %s\n", (mode_reg & OPTF) ? "yes" : "no");
#endif
- SPRINTF("OEM: %ld, %s\n", (mode_reg & (OEM0|OEM1)), nsp32_model[model]);
+ seq_printf(m, "OEM: %ld, %s\n", (mode_reg & (OEM0|OEM1)), nsp32_model[model]);
spin_lock_irqsave(&(data->Lock), flags);
- SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC);
+ seq_printf(m, "CurrentSC: 0x%p\n\n", data->CurrentSC);
spin_unlock_irqrestore(&(data->Lock), flags);
- SPRINTF("SDTR status\n");
+ seq_printf(m, "SDTR status\n");
for (id = 0; id < ARRAY_SIZE(data->target); id++) {
- SPRINTF("id %d: ", id);
+ seq_printf(m, "id %d: ", id);
if (id == host->this_id) {
- SPRINTF("----- NinjaSCSI-32 host adapter\n");
+ seq_printf(m, "----- NinjaSCSI-32 host adapter\n");
continue;
}
if (data->target[id].sync_flag == SDTR_DONE) {
if (data->target[id].period == 0 &&
data->target[id].offset == ASYNC_OFFSET ) {
- SPRINTF("async");
+ seq_printf(m, "async");
} else {
- SPRINTF(" sync");
+ seq_printf(m, " sync");
}
} else {
- SPRINTF(" none");
+ seq_printf(m, " none");
}
if (data->target[id].period != 0) {
speed = 1000000 / (data->target[id].period * 4);
- SPRINTF(" transfer %d.%dMB/s, offset %d",
+ seq_printf(m, " transfer %d.%dMB/s, offset %d",
speed / 1000,
speed % 1000,
data->target[id].offset
);
}
- SPRINTF("\n");
+ seq_printf(m, "\n");
}
return 0;
}
-#undef SPRINTF
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 34aad32..83db942 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1364,9 +1364,6 @@ static const char *nsp_info(struct Scsi_Host *shpnt)
return data->nspinfo;
}
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m, ##args)
-
static int nsp_show_info(struct seq_file *m, struct Scsi_Host *host)
{
int id;
@@ -1378,75 +1375,74 @@ static int nsp_show_info(struct seq_file *m, struct Scsi_Host *host)
hostno = host->host_no;
data = (nsp_hw_data *)host->hostdata;
- SPRINTF("NinjaSCSI status\n\n");
- SPRINTF("Driver version: $Revision: 1.23 $\n");
- SPRINTF("SCSI host No.: %d\n", hostno);
- SPRINTF("IRQ: %d\n", host->irq);
- SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
- SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
- SPRINTF("sg_tablesize: %d\n", host->sg_tablesize);
+ seq_printf(m, "NinjaSCSI status\n\n");
+ seq_printf(m, "Driver version: $Revision: 1.23 $\n");
+ seq_printf(m, "SCSI host No.: %d\n", hostno);
+ seq_printf(m, "IRQ: %d\n", host->irq);
+ seq_printf(m, "IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
+ seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
+ seq_printf(m, "sg_tablesize: %d\n", host->sg_tablesize);
- SPRINTF("burst transfer mode: ");
+ seq_printf(m, "burst transfer mode: ");
switch (nsp_burst_mode) {
case BURST_IO8:
- SPRINTF("io8");
+ seq_printf(m, "io8");
break;
case BURST_IO32:
- SPRINTF("io32");
+ seq_printf(m, "io32");
break;
case BURST_MEM32:
- SPRINTF("mem32");
+ seq_printf(m, "mem32");
break;
default:
- SPRINTF("???");
+ seq_printf(m, "???");
break;
}
- SPRINTF("\n");
+ seq_printf(m, "\n");
spin_lock_irqsave(&(data->Lock), flags);
- SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC);
+ seq_printf(m, "CurrentSC: 0x%p\n\n", data->CurrentSC);
spin_unlock_irqrestore(&(data->Lock), flags);
- SPRINTF("SDTR status\n");
+ seq_printf(m, "SDTR status\n");
for(id = 0; id < ARRAY_SIZE(data->Sync); id++) {
- SPRINTF("id %d: ", id);
+ seq_printf(m, "id %d: ", id);
if (id == host->this_id) {
- SPRINTF("----- NinjaSCSI-3 host adapter\n");
+ seq_printf(m, "----- NinjaSCSI-3 host adapter\n");
continue;
}
switch(data->Sync[id].SyncNegotiation) {
case SYNC_OK:
- SPRINTF(" sync");
+ seq_printf(m, " sync");
break;
case SYNC_NG:
- SPRINTF("async");
+ seq_printf(m, "async");
break;
case SYNC_NOT_YET:
- SPRINTF(" none");
+ seq_printf(m, " none");
break;
default:
- SPRINTF("?????");
+ seq_printf(m, "?????");
break;
}
if (data->Sync[id].SyncPeriod != 0) {
speed = 1000000 / (data->Sync[id].SyncPeriod * 4);
- SPRINTF(" transfer %d.%dMB/s, offset %d",
+ seq_printf(m, " transfer %d.%dMB/s, offset %d",
speed / 1000,
speed % 1000,
data->Sync[id].SyncOffset
);
}
- SPRINTF("\n");
+ seq_printf(m, "\n");
}
return 0;
}
-#undef SPRINTF
/*---------------------------------------------------------------*/
/* error handler */
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index f94d736..2d7c62f 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -1295,9 +1295,6 @@ static void wd7000_revision(Adapter * host)
}
-#undef SPRINTF
-#define SPRINTF(args...) { seq_printf(m, ## args); }
-
static int wd7000_set_info(struct Scsi_Host *host, char *buffer, int length)
{
dprintk("Buffer = <%.*s>, length = %d\n", length, buffer, length);
@@ -1320,43 +1317,43 @@ static int wd7000_show_info(struct seq_file *m, struct Scsi_Host *host)
#endif
spin_lock_irqsave(host->host_lock, flags);
- SPRINTF("Host scsi%d: Western Digital WD-7000 (rev %d.%d)\n", host->host_no, adapter->rev1, adapter->rev2);
- SPRINTF(" IO base: 0x%x\n", adapter->iobase);
- SPRINTF(" IRQ: %d\n", adapter->irq);
- SPRINTF(" DMA channel: %d\n", adapter->dma);
- SPRINTF(" Interrupts: %d\n", adapter->int_counter);
- SPRINTF(" BUS_ON time: %d nanoseconds\n", adapter->bus_on * 125);
- SPRINTF(" BUS_OFF time: %d nanoseconds\n", adapter->bus_off * 125);
+ seq_printf(m, "Host scsi%d: Western Digital WD-7000 (rev %d.%d)\n", host->host_no, adapter->rev1, adapter->rev2);
+ seq_printf(m, " IO base: 0x%x\n", adapter->iobase);
+ seq_printf(m, " IRQ: %d\n", adapter->irq);
+ seq_printf(m, " DMA channel: %d\n", adapter->dma);
+ seq_printf(m, " Interrupts: %d\n", adapter->int_counter);
+ seq_printf(m, " BUS_ON time: %d nanoseconds\n", adapter->bus_on * 125);
+ seq_printf(m, " BUS_OFF time: %d nanoseconds\n", adapter->bus_off * 125);
#ifdef WD7000_DEBUG
ogmbs = adapter->mb.ogmb;
icmbs = adapter->mb.icmb;
- SPRINTF("\nControl port value: 0x%x\n", adapter->control);
- SPRINTF("Incoming mailbox:\n");
- SPRINTF(" size: %d\n", ICMB_CNT);
- SPRINTF(" queued messages: ");
+ seq_printf(m, "\nControl port value: 0x%x\n", adapter->control);
+ seq_printf(m, "Incoming mailbox:\n");
+ seq_printf(m, " size: %d\n", ICMB_CNT);
+ seq_printf(m, " queued messages: ");
for (i = count = 0; i < ICMB_CNT; i++)
if (icmbs[i].status) {
count++;
- SPRINTF("0x%x ", i);
+ seq_printf(m, "0x%x ", i);
}
- SPRINTF(count ? "\n" : "none\n");
+ seq_printf(m, count ? "\n" : "none\n");
- SPRINTF("Outgoing mailbox:\n");
- SPRINTF(" size: %d\n", OGMB_CNT);
- SPRINTF(" next message: 0x%x\n", adapter->next_ogmb);
- SPRINTF(" queued messages: ");
+ seq_printf(m, "Outgoing mailbox:\n");
+ seq_printf(m, " size: %d\n", OGMB_CNT);
+ seq_printf(m, " next message: 0x%x\n", adapter->next_ogmb);
+ seq_printf(m, " queued messages: ");
for (i = count = 0; i < OGMB_CNT; i++)
if (ogmbs[i].status) {
count++;
- SPRINTF("0x%x ", i);
+ seq_printf(m, "0x%x ", i);
}
- SPRINTF(count ? "\n" : "none\n");
+ seq_printf(m, count ? "\n" : "none\n");
#endif
spin_unlock_irqrestore(host->host_lock, flags);
--
2.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
