Hi Brian, > > Currently when performing a kexec boot with an ipr adapter, > > the adapter gets shutdown completely, flushing all write > > cache, as well as performing a full hardware reset of the card > > during the shutdown phase of the old kernel. This forces > > the new kernel to then wait for the adapter firmware to > > reinitialize, which slows down kexec boot. There is no > > need to do all of this on the newer ipr adapters, since they > > support the ability to cancel outstanding error buffers. > > > > This patch adds a special case for kexec boot to simply > > cancel these outstanding error buffers, and as long as > > there is no other I/O outstanding to the adapter, which > > there shouldn't be, place the adapter into a state > > where it has no memory of any DMA addresses from the old > > kernel, then disable the device. This significantly > > speeds up kexec boot, particularly in configurations with > > multiple ipr adapters. > > > > Signed-off-by: Brian King <brking@xxxxxxxxxxxxxxxxxx> > > --- > > This reduces boot time on my box from 80 seconds to 34 seconds. ppc64 > kernel developers (who boot boxes continually) thank you! > > Tested-by: Anton Blanchard <anton@xxxxxxxxx> Just checking on this series. I'm very keen to see it go in since it is a huge improvement in boot time. Anton -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
