In OCR(Online Controller Reset) path, driver sets adapter state to MEGASAS_HBA_OPERATIONAL before getting new RAID map.
There will be a small window where IO will come from OS with old RAID map.
This patch will update adapter state to MEGASAS_HBA_OPERATIONAL, only after driver has new RAID map to avoid
any IOs getting build using old RAID map.
Signed-off-by: Sumit Saxena <sumit.saxena@xxxxxxxxxxxxx>
Signed-off-by: Kashyap Desai <kashyap.desai@xxxxxxxxxxxxx>
---
drivers/scsi/megaraid/megaraid_sas_fusion.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index b8411a1..aeb76d3 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -2801,11 +2801,6 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int iotimeout)
}
}
- clear_bit(MEGASAS_FUSION_IN_RESET,
- &instance->reset_flags);
- instance->instancet->enable_intr(instance);
- instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
-
if (megasas_get_ctrl_info(instance)) {
dev_info(&instance->pdev->dev,
"Failed from %s %d\n",
@@ -2823,6 +2818,11 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int iotimeout)
if (!megasas_get_map_info(instance))
megasas_sync_map_info(instance);
+ clear_bit(MEGASAS_FUSION_IN_RESET,
+ &instance->reset_flags);
+ instance->instancet->enable_intr(instance);
+ instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
+
/* Restart SR-IOV heartbeat */
if (instance->requestorId) {
if (!megasas_sriov_start_heartbeat(instance, 0))
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
