Calling scsi_print_command should not be necessary during abort;
if the information is required one should enable scsi logging.
Reviewed-by: Robert Elliott <elliott@xxxxxx>
Reviewed-by: Christoph Hellwig <hch@xxxxxx>
Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
---
drivers/scsi/53c700.c | 4 +---
drivers/scsi/NCR5380.c | 5 ++---
drivers/scsi/arm/fas216.c | 10 +++-------
drivers/scsi/atari_NCR5380.c | 3 +--
drivers/scsi/ps3rom.c | 4 ----
drivers/scsi/stex.c | 9 +++------
drivers/scsi/sun3_NCR5380.c | 3 +--
7 files changed, 11 insertions(+), 27 deletions(-)
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 179a24e..474cc6d 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -1906,9 +1906,7 @@ NCR_700_abort(struct scsi_cmnd * SCp)
{
struct NCR_700_command_slot *slot;
- scmd_printk(KERN_INFO, SCp,
- "New error handler wants to abort command\n\t");
- scsi_print_command(SCp);
+ scmd_printk(KERN_INFO, SCp, "abort command\n");
slot = (struct NCR_700_command_slot *)SCp->host_scribble;
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 45da3c8..50873bb 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -2666,9 +2666,8 @@ static int NCR5380_abort(Scsi_Cmnd * cmd) {
struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
Scsi_Cmnd *tmp, **prev;
-
- printk(KERN_WARNING "scsi%d : aborting command\n", instance->host_no);
- scsi_print_command(cmd);
+
+ scmd_printk(KERN_WARNING, cmd, "aborting command\n");
NCR5380_print_status(instance);
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index d2581cb..e64c3af 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2423,14 +2423,11 @@ int fas216_eh_abort(struct scsi_cmnd *SCpnt)
info->stats.aborts += 1;
- printk(KERN_WARNING "scsi%d: abort command ", info->host->host_no);
- __scsi_print_command(SCpnt->cmnd, SCpnt->cmd_len);
+ scmd_printk(KERN_WARNING, SCpnt, "abort command\n");
print_debug_list();
fas216_dumpstate(info);
- printk(KERN_WARNING "scsi%d: abort %p ", info->host->host_no, SCpnt);
-
switch (fas216_find_command(info, SCpnt)) {
/*
* We found the command, and cleared it out. Either
@@ -2438,7 +2435,7 @@ int fas216_eh_abort(struct scsi_cmnd *SCpnt)
* target, or the busylun bit is not set.
*/
case res_success:
- printk("success\n");
+ scmd_printk(KERN_WARNING, SCpnt, "abort %p success\n", SCpnt);
result = SUCCESS;
break;
@@ -2448,14 +2445,13 @@ int fas216_eh_abort(struct scsi_cmnd *SCpnt)
* if the bus is free.
*/
case res_hw_abort:
-
/*
* We are unable to abort the command for some reason.
*/
default:
case res_failed:
- printk("failed\n");
+ scmd_printk(KERN_WARNING, SCpnt, "abort %p failed\n", SCpnt);
break;
}
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 79e6f04..229c61b 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -2623,8 +2623,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
Scsi_Cmnd *tmp, **prev;
unsigned long flags;
- printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO);
- scsi_print_command(cmd);
+ scmd_printk(KERN_NOTICE, cmd, "aborting command\n");
NCR5380_print_status(instance);
diff --git a/drivers/scsi/ps3rom.c b/drivers/scsi/ps3rom.c
index ef23fab..b3b48b5 100644
--- a/drivers/scsi/ps3rom.c
+++ b/drivers/scsi/ps3rom.c
@@ -220,10 +220,6 @@ static int ps3rom_queuecommand_lck(struct scsi_cmnd *cmd,
unsigned char opcode;
int res;
-#ifdef DEBUG
- scsi_print_command(cmd);
-#endif
-
priv->curr_cmd = cmd;
cmd->scsi_done = done;
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 1aa4bef..713af13 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -1162,9 +1162,7 @@ static int stex_abort(struct scsi_cmnd *cmd)
int result = SUCCESS;
unsigned long flags;
- printk(KERN_INFO DRV_NAME
- "(%s): aborting command\n", pci_name(hba->pdev));
- scsi_print_command(cmd);
+ scmd_printk(KERN_INFO, cmd, "aborting command\n");
base = hba->mmio_base;
spin_lock_irqsave(host->host_lock, flags);
@@ -1352,9 +1350,8 @@ static int stex_reset(struct scsi_cmnd *cmd)
hba = (struct st_hba *) &cmd->device->host->hostdata[0];
- printk(KERN_INFO DRV_NAME
- "(%s): resetting host\n", pci_name(hba->pdev));
- scsi_print_command(cmd);
+ shost_printk(KERN_INFO, cmd->device->host,
+ "resetting host\n");
return stex_do_reset(hba) ? FAILED : SUCCESS;
}
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index 1a2367a..3abd796 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -2608,8 +2608,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
struct scsi_cmnd *tmp, **prev;
unsigned long flags;
- printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO);
- scsi_print_command(cmd);
+ scmd_printk(KERN_NOTICE, cmd, "aborting command\n");
NCR5380_print_status (instance);
--
1.8.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
