Some NCR5380-based drivers implement support for linked commands
via a 'next_link' pointer in struct scsi_cmnd. This pointer has
long since removed, rendering the code pointless.
So remove it.
Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
---
drivers/scsi/NCR5380.c | 40 -------------------------------
drivers/scsi/atari_NCR5380.c | 57 --------------------------------------------
drivers/scsi/sun3_NCR5380.c | 57 --------------------------------------------
3 files changed, 154 deletions(-)
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index c8aa935..a0c8c5d 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -104,7 +104,6 @@
#endif
#ifndef notyet
-#undef LINKED
#undef REAL_DMA
#endif
@@ -216,8 +215,6 @@
* these transfers, we might need this to give reasonable interrupt
* service time if the transfer size gets too large.
*
- * LINKED - if defined, linked commands are supported.
- *
* PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases.
*
* REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
@@ -2210,43 +2207,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
cmd->SCp.Message = tmp;
switch (tmp) {
- /*
- * Linking lets us reduce the time required to get the
- * next command out to the device, hopefully this will
- * mean we don't waste another revolution due to the delays
- * required by ARBITRATION and another SELECTION.
- *
- * In the current implementation proposal, low level drivers
- * merely have to start the next command, pointed to by
- * next_link, done() is called as with unlinked commands.
- */
-#ifdef LINKED
- case LINKED_CMD_COMPLETE:
- case LINKED_FLG_CMD_COMPLETE:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- dprintk(NDEBUG_LINKED, "scsi%d : target %d lun %llu linked command complete.\n", instance->host_no, cmd->device->id, cmd->device->lun);
- /*
- * Sanity check : A linked command should only terminate with
- * one of these messages if there are more linked commands
- * available.
- */
- if (!cmd->next_link) {
- printk("scsi%d : target %d lun %llu linked command complete, no next_link\n" instance->host_no, cmd->device->id, cmd->device->lun);
- sink = 1;
- do_abort(instance);
- return;
- }
- initialize_SCp(cmd->next_link);
- /* The next command is still part of this process */
- cmd->next_link->tag = cmd->tag;
- cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
- dprintk(NDEBUG_LINKED, "scsi%d : target %d lun %llu linked request done, calling scsi_done().\n", instance->host_no, cmd->device->id, cmd->device->lun);
- collect_stats(hostdata, cmd);
- cmd->scsi_done(cmd);
- cmd = hostdata->connected;
- break;
-#endif /* def LINKED */
case ABORT:
case COMMAND_COMPLETE:
/* Accept message by clearing ACK */
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 79e6f04..d11c271 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -97,10 +97,6 @@
#define REMOVE(w,x,y,z)
#endif
-#ifndef notyet
-#undef LINKED
-#endif
-
/*
* Design
* Issues :
@@ -211,8 +207,6 @@
* AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
* for commands that return with a CHECK CONDITION status.
*
- * LINKED - if defined, linked commands are supported.
- *
* REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
*
* SUPPORT_TAGS - if defined, SCSI-2 tagged queuing is used where possible
@@ -2101,57 +2095,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
cmd->SCp.Message = tmp;
switch (tmp) {
- /*
- * Linking lets us reduce the time required to get the
- * next command out to the device, hopefully this will
- * mean we don't waste another revolution due to the delays
- * required by ARBITRATION and another SELECTION.
- *
- * In the current implementation proposal, low level drivers
- * merely have to start the next command, pointed to by
- * next_link, done() is called as with unlinked commands.
- */
-#ifdef LINKED
- case LINKED_CMD_COMPLETE:
- case LINKED_FLG_CMD_COMPLETE:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %llu linked command "
- "complete.\n", HOSTNO, cmd->device->id, cmd->device->lun);
-
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /*
- * Sanity check : A linked command should only terminate
- * with one of these messages if there are more linked
- * commands available.
- */
-
- if (!cmd->next_link) {
- printk(KERN_NOTICE "scsi%d: target %d lun %llu "
- "linked command complete, no next_link\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
- sink = 1;
- do_abort(instance);
- return;
- }
-
- initialize_SCp(cmd->next_link);
- /* The next command is still part of this process; copy it
- * and don't free it! */
- cmd->next_link->tag = cmd->tag;
- cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
- dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %llu linked request "
- "done, calling scsi_done().\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
-#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
-#endif
- cmd->scsi_done(cmd);
- cmd = hostdata->connected;
- break;
-#endif /* def LINKED */
case ABORT:
case COMMAND_COMPLETE:
/* Accept message by clearing ACK */
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index 1a2367a..efdc555 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -84,10 +84,6 @@
#define REMOVE(w,x,y,z)
#endif
-#ifndef notyet
-#undef LINKED
-#endif
-
/*
* Design
* Issues :
@@ -198,8 +194,6 @@
* AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
* for commands that return with a CHECK CONDITION status.
*
- * LINKED - if defined, linked commands are supported.
- *
* REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
*
* SUPPORT_TAGS - if defined, SCSI-2 tagged queuing is used where possible
@@ -2065,57 +2059,6 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance)
cmd->SCp.Message = tmp;
switch (tmp) {
- /*
- * Linking lets us reduce the time required to get the
- * next command out to the device, hopefully this will
- * mean we don't waste another revolution due to the delays
- * required by ARBITRATION and another SELECTION.
- *
- * In the current implementation proposal, low level drivers
- * merely have to start the next command, pointed to by
- * next_link, done() is called as with unlinked commands.
- */
-#ifdef LINKED
- case LINKED_CMD_COMPLETE:
- case LINKED_FLG_CMD_COMPLETE:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %llu linked command "
- "complete.\n", HOSTNO, cmd->device->id, cmd->device->lun);
-
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /*
- * Sanity check : A linked command should only terminate
- * with one of these messages if there are more linked
- * commands available.
- */
-
- if (!cmd->next_link) {
- printk(KERN_NOTICE "scsi%d: target %d lun %llu "
- "linked command complete, no next_link\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
- sink = 1;
- do_abort (instance);
- return;
- }
-
- initialize_SCp(cmd->next_link);
- /* The next command is still part of this process; copy it
- * and don't free it! */
- cmd->next_link->tag = cmd->tag;
- cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
- dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %llu linked request "
- "done, calling scsi_done().\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
-#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
-#endif
- cmd->scsi_done(cmd);
- cmd = hostdata->connected;
- break;
-#endif /* def LINKED */
case ABORT:
case COMMAND_COMPLETE:
/* Accept message by clearing ACK */
--
1.8.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
