https://bugzilla.kernel.org/show_bug.cgi?id=85101 --- Comment #6 from linux-ide@xxxxxxxxxxxxx --- The HP Smart Array P410 still has its issues: sometimes the diagnostics LED turns amber, other times it works ok. As a fall back a Marvell controller detects the HP SAS expander card fine: # lsscsi -g | grep HP [6:0:0:0] enclosu HP HP SAS EXP Card 2.08 - /dev/sg1 I am not able to figure out a correct sg_write_buffer command. Run from the directory where the unpacked binary image is stored: # sg_write_buffer --bpw=4096 -v --in=PUF21000.bin /dev/sg1 tried to read 8388608 bytes from PUF21000.bin, got 1509632 bytes will write 1509632 bytes sending write buffer, mode=0x0, mspec=0, id=0, offset=0, len=4096 Write buffer cmd: 3b 00 00 00 00 00 00 10 00 00 write buffer: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid field in cdb Write buffer failed: Illegal request sense key, apart from Invalid opcode Any suggestions for the correct sg_write_buffer statement for writing to an HP SAS expander card? -- You are receiving this mail because: You are watching the assignee of the bug. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
