- Adding some of the definitions missing in unipro.h, including power
enumeration.
- Read Modify Write Line helper function
- Indication for the type of suspend
Signed-off-by: Dolev Raviv <draviv@xxxxxxxxxxxxxx>
Signed-off-by: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
Signed-off-by: Yaniv Gardi <ygardi@xxxxxxxxxxxxxx>
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 60260e8..5c78c3d 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -5114,6 +5114,8 @@ int ufshcd_system_suspend(struct ufs_hba *hba)
ret = ufshcd_suspend(hba, UFS_SYSTEM_PM);
out:
+ if (!ret)
+ hba->is_sys_suspended = true;
return ret;
}
EXPORT_SYMBOL(ufshcd_system_suspend);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index d7fec86..58ecdff 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -474,6 +474,7 @@ struct ufs_hba {
struct devfreq *devfreq;
struct ufs_clk_scaling clk_scaling;
+ bool is_sys_suspended;
};
/* Returns true if clocks can be gated. Otherwise false */
@@ -499,6 +500,23 @@ static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba)
#define ufshcd_readl(hba, reg) \
readl((hba)->mmio_base + (reg))
+/**
+ * ufshcd_rmwl - read modify write into a register
+ * @hba - per adapter instance
+ * @mask - mask to apply on read value
+ * @val - actual value to write
+ * @reg - register address
+ */
+static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg)
+{
+ u32 tmp;
+
+ tmp = ufshcd_readl(hba, reg);
+ tmp &= ~mask;
+ tmp |= (val & mask);
+ ufshcd_writel(hba, tmp, reg);
+}
+
int ufshcd_alloc_host(struct device *, struct ufs_hba **);
int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
void ufshcd_remove(struct ufs_hba *);
diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
index 0bb8041..3fc3e21 100644
--- a/drivers/scsi/ufs/unipro.h
+++ b/drivers/scsi/ufs/unipro.h
@@ -13,6 +13,44 @@
#define _UNIPRO_H_
/*
+ * M-TX Configuration Attributes
+ */
+#define TX_MODE 0x0021
+#define TX_HSRATE_SERIES 0x0022
+#define TX_HSGEAR 0x0023
+#define TX_PWMGEAR 0x0024
+#define TX_AMPLITUDE 0x0025
+#define TX_HS_SLEWRATE 0x0026
+#define TX_SYNC_SOURCE 0x0027
+#define TX_HS_SYNC_LENGTH 0x0028
+#define TX_HS_PREPARE_LENGTH 0x0029
+#define TX_LS_PREPARE_LENGTH 0x002A
+#define TX_HIBERN8_CONTROL 0x002B
+#define TX_LCC_ENABLE 0x002C
+#define TX_PWM_BURST_CLOSURE_EXTENSION 0x002D
+#define TX_BYPASS_8B10B_ENABLE 0x002E
+#define TX_DRIVER_POLARITY 0x002F
+#define TX_HS_UNTERMINATED_LINE_DRIVE_ENABLE 0x0030
+#define TX_LS_TERMINATED_LINE_DRIVE_ENABLE 0x0031
+#define TX_LCC_SEQUENCER 0x0032
+#define TX_MIN_ACTIVATETIME 0x0033
+#define TX_PWM_G6_G7_SYNC_LENGTH 0x0034
+
+/*
+ * M-RX Configuration Attributes
+ */
+#define RX_MODE 0x00A1
+#define RX_HSRATE_SERIES 0x00A2
+#define RX_HSGEAR 0x00A3
+#define RX_PWMGEAR 0x00A4
+#define RX_LS_TERMINATED_ENABLE 0x00A5
+#define RX_HS_UNTERMINATED_ENABLE 0x00A6
+#define RX_ENTER_HIBERN8 0x00A7
+#define RX_BYPASS_8B10B_ENABLE 0x00A8
+#define RX_TERMINATION_FORCE_ENABLE 0x0089
+
+#define is_mphy_tx_attr(attr) (attr < RX_MODE)
+/*
* PHY Adpater attributes
*/
#define PA_ACTIVETXDATALANES 0x1560
@@ -87,6 +125,24 @@ enum {
PA_HS_MODE_B = 2,
};
+enum ufs_pwm_gear_tag {
+ UFS_PWM_DONT_CHANGE, /* Don't change Gear */
+ UFS_PWM_G1, /* PWM Gear 1 (default for reset) */
+ UFS_PWM_G2, /* PWM Gear 2 */
+ UFS_PWM_G3, /* PWM Gear 3 */
+ UFS_PWM_G4, /* PWM Gear 4 */
+ UFS_PWM_G5, /* PWM Gear 5 */
+ UFS_PWM_G6, /* PWM Gear 6 */
+ UFS_PWM_G7, /* PWM Gear 7 */
+};
+
+enum ufs_hs_gear_tag {
+ UFS_HS_DONT_CHANGE, /* Don't change Gear */
+ UFS_HS_G1, /* HS Gear 1 (default for reset) */
+ UFS_HS_G2, /* HS Gear 2 */
+ UFS_HS_G3, /* HS Gear 3 */
+};
+
/*
* Data Link Layer Attributes
*/
--
1.8.5.2
--
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
