https://bugzilla.kernel.org/show_bug.cgi?id=85101 --- Comment #2 from linux-ide@xxxxxxxxxxxxx --- In this case the hardware seems broken. The P410 controller is only used for upgrading the HP SAS expander firmware. This time we started with upgrading the controller firmware: === ./ccissflash This program consists of two phases: device discovery and device update. No device will be updated until you answer. Do you want to run device discovery? (yes/no) yes Finding hardware. This may take a few minutes. Found 1 devices. Do you want to upgrade the device that has older ROM? (yes/no) yes 1 devices will be updated. Updating: P410 Slot: 2 from [5.70] to [6.60] Updating: P410 Slot: 2 from [5.70] to [6.60] As part of the reboot process, you must power cycle the server and any external array storage devices. === After power cycling the first three reboots were ok. Then a controller lockup 0x00130000 occurred 468 seconds after loading the hpsa module. Since then only one boot/module loading was ok and since then the "time outs" are occurring: === [ 121.613269] HP HPSA Driver (v 3.4.0-1) [ 121.613344] hpsa 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 121.613447] hpsa 0000:01:00.0: enabling device (0000 -> 0003) [ 121.613669] hpsa 0000:01:00.0: MSIX [ 121.613770] hpsa 0000:01:00.0: irq 46 for MSI/MSI-X [ 121.613843] hpsa 0000:01:00.0: irq 47 for MSI/MSI-X [ 121.613909] hpsa 0000:01:00.0: irq 48 for MSI/MSI-X [ 121.613981] hpsa 0000:01:00.0: irq 49 for MSI/MSI-X [ 121.614046] hpsa 0000:01:00.0: irq 50 for MSI/MSI-X [ 121.614117] hpsa 0000:01:00.0: irq 51 for MSI/MSI-X [ 121.614182] hpsa 0000:01:00.0: irq 52 for MSI/MSI-X [ 121.614251] hpsa 0000:01:00.0: irq 53 for MSI/MSI-X [ 121.634560] hpsa 0000:01:00.0: hpsa0: <0x323a> at IRQ 46 using DAC [ 127.171906] scsi4 : hpsa [ 127.174883] hpsa 0000:01:00.0: RAID device c4b3t0l0 added. [ 127.175961] scsi 4:3:0:0: RAID HP P410 6.60 PQ: 0 ANSI: 5 [ 127.176335] scsi 4:3:0:0: Attached scsi generic sg1 type 12 [ 424.473998] HP HPSA Driver (v 3.4.0-1) === [ 16.127857] HP HPSA Driver (v 3.4.0-1) [ 16.127927] hpsa 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 16.128020] hpsa 0000:01:00.0: enabling device (0000 -> 0003) [ 16.128231] hpsa 0000:01:00.0: MSIX [ 16.128327] hpsa 0000:01:00.0: irq 46 for MSI/MSI-X [ 16.128394] hpsa 0000:01:00.0: irq 47 for MSI/MSI-X [ 16.128460] hpsa 0000:01:00.0: irq 48 for MSI/MSI-X [ 16.128524] hpsa 0000:01:00.0: irq 49 for MSI/MSI-X [ 16.128590] hpsa 0000:01:00.0: irq 50 for MSI/MSI-X [ 16.128660] hpsa 0000:01:00.0: irq 51 for MSI/MSI-X [ 16.128726] hpsa 0000:01:00.0: irq 52 for MSI/MSI-X [ 16.128791] hpsa 0000:01:00.0: irq 53 for MSI/MSI-X [ 16.149110] hpsa 0000:01:00.0: hpsa0: <0x323a> at IRQ 46 using DAC [ 34.767566] scsi4 : hpsa [ 34.770583] hpsa 0000:01:00.0: RAID device c4b3t0l0 added. [ 34.771054] scsi 4:3:0:0: RAID HP P410 6.60 PQ: 0 ANSI: 5 === [ 48.389920] HP HPSA Driver (v 3.4.4-1) [ 48.389985] hpsa 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 48.390059] hpsa 0000:01:00.0: enabling device (0000 -> 0003) [ 48.390239] hpsa 0000:01:00.0: MSIX [ 48.390312] hpsa 0000:01:00.0: irq 30 for MSI/MSI-X [ 48.390362] hpsa 0000:01:00.0: irq 31 for MSI/MSI-X [ 48.390453] hpsa 0000:01:00.0: Logical aborts not supported [ 48.410617] hpsa 0000:01:00.0: hpsa0: <0x323a> at IRQ 30 using DAC [ 53.947809] scsi host4: hpsa [ 53.953488] hpsa 0000:01:00.0: RAID device c4b3t0l0 added. [ 53.953986] scsi 4:3:0:0: RAID HP P410 6.60 PQ: 0 ANSI: 5 === [ 17.076307] HP HPSA Driver (v 3.4.4-1) [ 17.076388] hpsa 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 17.076483] hpsa 0000:01:00.0: enabling device (0000 -> 0003) [ 17.076695] hpsa 0000:01:00.0: MSIX [ 17.076782] hpsa 0000:01:00.0: irq 30 for MSI/MSI-X [ 17.076837] hpsa 0000:01:00.0: irq 31 for MSI/MSI-X [ 17.076942] hpsa 0000:01:00.0: Logical aborts not supported [ 17.097108] hpsa 0000:01:00.0: hpsa0: <0x323a> at IRQ 30 using DAC [ 33.659110] scsi host4: hpsa [ 33.663958] hpsa 0000:01:00.0: RAID device c4b3t0l0 added. [ 33.664360] scsi 4:3:0:0: RAID HP P410 6.60 PQ: 0 ANSI: 5 [ 33.665053] scsi 4:3:0:0: Attached scsi generic sg1 type 12 [ 485.066696] hpsa 0000:01:00.0: Controller lockup detected: 0x00130000 === [ 49.567169] HP HPSA Driver (v 3.4.4-1) [ 49.567251] hpsa 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 49.567389] hpsa 0000:01:00.0: enabling device (0000 -> 0003) [ 49.567576] hpsa 0000:01:00.0: MSIX [ 49.567649] hpsa 0000:01:00.0: irq 30 for MSI/MSI-X [ 49.567705] hpsa 0000:01:00.0: irq 31 for MSI/MSI-X [ 49.567799] hpsa 0000:01:00.0: Logical aborts not supported [ 49.587966] hpsa 0000:01:00.0: hpsa0: <0x323a> at IRQ 30 using DAC [ 55.125143] scsi host4: hpsa [ 55.129439] hpsa 0000:01:00.0: RAID device c4b3t0l0 added. [ 55.129832] scsi 4:3:0:0: RAID HP P410 6.60 PQ: 0 ANSI: 5 === [ 38.305788] HP HPSA Driver (v 3.4.4-1) [ 38.305854] hpsa 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 38.306052] hpsa 0000:01:00.0: MSIX [ 38.306127] hpsa 0000:01:00.0: irq 29 for MSI/MSI-X [ 38.306179] hpsa 0000:01:00.0: irq 30 for MSI/MSI-X [ 163.163631] hpsa 0000:01:00.0: board not ready, timed out. === [ 23.324890] HP HPSA Driver (v 3.4.0-1) [ 23.324957] hpsa 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 23.325060] hpsa 0000:01:00.0: enabling device (0000 -> 0003) [ 23.325281] hpsa 0000:01:00.0: MSIX [ 23.325379] hpsa 0000:01:00.0: irq 45 for MSI/MSI-X [ 23.325453] hpsa 0000:01:00.0: irq 46 for MSI/MSI-X [ 23.325518] hpsa 0000:01:00.0: irq 47 for MSI/MSI-X [ 23.325591] hpsa 0000:01:00.0: irq 48 for MSI/MSI-X [ 23.325655] hpsa 0000:01:00.0: irq 49 for MSI/MSI-X [ 23.325728] hpsa 0000:01:00.0: irq 50 for MSI/MSI-X [ 23.325793] hpsa 0000:01:00.0: irq 51 for MSI/MSI-X [ 23.325865] hpsa 0000:01:00.0: irq 52 for MSI/MSI-X [ 148.185212] hpsa 0000:01:00.0: board not ready, timed out. === Right now loading the hpsa module permanently errors out with "board not ready, timed out" and the "DS1: Diagnostics Error" LED turns Amber (=One of the server diagnostics utilities has detected a controller error.) Seems like a hardware issue, therefore this case can be closed. -- You are receiving this mail because: You are watching the assignee of the bug. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
