If a cable is pulled during LUN scanning it can happen that the
SRP rport and the SCSI host have been created but no LUNs have been
added to the SCSI host. Since multipathd only sends SCSI commands
to a SCSI target if one or more SCSI devices are present and since
there is no keepalive mechanism for IB queue pairs this means that
after a LUN scan failed and after a reconnect has succeeded no
data will be sent over the QP and hence that a subsequent cable
pull will not be detected. Avoid this by not creating an rport or
SCSI host if a cable is pulled during a SCSI LUN scan.
Note: so far the above behavior has only been observed with the
kernel module parameter ch_count set to a value >= 2.
Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>
---
drivers/infiniband/ulp/srp/ib_srp.c | 56 +++++++++++++++++++++++++++++++------
drivers/infiniband/ulp/srp/ib_srp.h | 1 +
2 files changed, 48 insertions(+), 9 deletions(-)
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 9608e7a..fd88fb8 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -1111,6 +1111,10 @@ static int srp_rport_reconnect(struct srp_rport *rport)
int i, ret;
srp_disconnect_target(target);
+
+ if (target->state == SRP_TARGET_SCANNING)
+ return -ENODEV;
+
/*
* Now get a new local CM ID so that we avoid confusing the target in
* case things are really fouled up. Doing so also ensures that all CM
@@ -2607,11 +2611,23 @@ static struct scsi_host_template srp_template = {
.shost_attrs = srp_host_attrs
};
+static int srp_sdev_count(struct Scsi_Host *host)
+{
+ struct scsi_device *sdev;
+ int c = 0;
+
+ shost_for_each_device(sdev, host)
+ c++;
+
+ return c;
+}
+
static int srp_add_target(struct srp_host *host, struct srp_target_port *target)
{
struct srp_rport_identifiers ids;
struct srp_rport *rport;
+ target->state = SRP_TARGET_SCANNING;
sprintf(target->target_name, "SRP.T10:%016llX",
(unsigned long long) be64_to_cpu(target->id_ext));
@@ -2634,11 +2650,26 @@ static int srp_add_target(struct srp_host *host, struct srp_target_port *target)
list_add_tail(&target->list, &host->target_list);
spin_unlock(&host->target_lock);
- target->state = SRP_TARGET_LIVE;
-
scsi_scan_target(&target->scsi_host->shost_gendev,
0, target->scsi_id, SCAN_WILD_CARD, 0);
+ if (!target->connected || target->qp_in_error) {
+ shost_printk(KERN_INFO, target->scsi_host,
+ PFX "SCSI scan failed - removing SCSI host\n");
+ srp_queue_remove_work(target);
+ goto out;
+ }
+
+ pr_debug(PFX "%s: SCSI scan succeeded - detected %d LUNs\n",
+ dev_name(&target->scsi_host->shost_gendev),
+ srp_sdev_count(target->scsi_host));
+
+ spin_lock_irq(&target->lock);
+ if (target->state == SRP_TARGET_SCANNING)
+ target->state = SRP_TARGET_LIVE;
+ spin_unlock_irq(&target->lock);
+
+out:
return 0;
}
@@ -3044,13 +3075,20 @@ static ssize_t srp_create_target(struct device *dev,
if (ret)
goto err_disconnect;
- shost_printk(KERN_DEBUG, target->scsi_host, PFX
- "new target: id_ext %016llx ioc_guid %016llx pkey %04x service_id %016llx sgid %pI6 dgid %pI6\n",
- be64_to_cpu(target->id_ext),
- be64_to_cpu(target->ioc_guid),
- be16_to_cpu(target->path.pkey),
- be64_to_cpu(target->service_id),
- target->path.sgid.raw, target->path.dgid.raw);
+ /* Protects against concurrent srp_remove_target() invocation. */
+ scsi_host_get(target->scsi_host);
+
+ if (target->state != SRP_TARGET_REMOVED) {
+ shost_printk(KERN_DEBUG, target->scsi_host, PFX
+ "new target: id_ext %016llx ioc_guid %016llx pkey %04x service_id %016llx sgid %pI6 dgid %pI6\n",
+ be64_to_cpu(target->id_ext),
+ be64_to_cpu(target->ioc_guid),
+ be16_to_cpu(target->path.pkey),
+ be64_to_cpu(target->service_id),
+ target->path.sgid.raw, target->orig_dgid);
+ }
+
+ scsi_host_put(target->scsi_host);
ret = count;
diff --git a/drivers/infiniband/ulp/srp/ib_srp.h b/drivers/infiniband/ulp/srp/ib_srp.h
index e46ecb1..00c7c48 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.h
+++ b/drivers/infiniband/ulp/srp/ib_srp.h
@@ -73,6 +73,7 @@ enum {
};
enum srp_target_state {
+ SRP_TARGET_SCANNING,
SRP_TARGET_LIVE,
SRP_TARGET_REMOVED,
};
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
