Re: WARNING in block layer triggered in 3.17-rc3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2014-09-08 at 10:51 -0400, Alan Stern wrote:
> On Sun, 7 Sep 2014, Shirish Pargaonkar wrote:
> 
> > I think the problem is, when a gendisk is detached, its request queue
> > is not put in bypass mode
> > cause when it is re-attached, code tries to put it out of bypass mode,
> > hence the warning.
> > 
> > So either of these should work, I have not tested it, just coded it up.
> 
> I'm pretty sure that both of your solutions are wrong.
> 
> Jens and James, it appears the problem is in blk_register_queue().  The 
> code does this:
> 
> 	/*
> 	 * Initialization must be complete by now.  Finish the initial
> 	 * bypass from queue allocation.
> 	 */
> 	queue_flag_set_unlocked(QUEUE_FLAG_INIT_DONE, q);
> 	blk_queue_bypass_end(q);
> 
> This doesn't work well if the queue is unregistered later and then
> registered again -- which is what happens when the sd driver is unbound
> from a device and then bound again.  It looks like the code should be:
> 
> 	if (!queue_flag_test_and_set(QUEUE_FLAG_INIT_DONE, q))
> 		blk_queue_bypass_end(q);
> 
> Do you agree?  If so, I'll send in patch.

This looks like a nasty hack.  In theory the QUEUE_FLAG_INIT_DONE should
be unset on blk_unregister_queue() to match the teardown; it's only
accident it isn't.  del_gendisk() in sd_remove() is supposed to tear a
lot of queue stuff down.  However, the problem looks to be the mismatch
in assumptions.  The way SCSI binding works, the queue belongs to the
underlying device so we always assumed we could add and remove upper
drivers ... there's even a case for this if you don't want a disk but
want to attach sg instead.  However, it's not the common use case.

The block model now seems to tie a lot of queue set up and teardown to
add and remove of the gendisk which is counter to these assumptions.  As
long as we can go from del->add without calling the ->release function
on the queue, everything works.  Most of the operations seem
symmetrical, so perhaps this is only the bypass doing too much.

The ideal is that disk teardown only does as much as disk setup, so the
mid layer can still use the underlying queue on the device.

This bypass code is not very well documented.  However, your problem
seems to be caused by this change:

commit 776687bce42bb22cce48b5da950e48ebbb9a948f
Author: Tejun Heo <tj@xxxxxxxxxx>
Date:   Tue Jul 1 10:29:17 2014 -0600

    block, blk-mq: draining can't be skipped even if bypass_depth was
non-zero

Your hack seems to indicate that this doesn't work on the add->del->add
transtion of a gendisk.

James



--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux