There are no mean that additional sense code and additional sense code
qualifier
are output as different messages of sense key, so those information
are added.
Note:
scsi_show_extd_sense() is changed from export symbol to non-export
symbol.
- Result examples
<Before> (printk)
sd 2:0:0:0: [sda] Add. Sense: Unrecovered read error
<After> (ftrace, merged into scsi_print_sense traceevent)
scsi_print_sense: host_no=2 channel=0 id=0 lun=0 [sda] Sense Key
(Medium Error [current]) Add. Sense (Unrecovered read error)
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@xxxxxxxxxxx>
Cc: Hannes Reinecke <hare@xxxxxxx>
Cc: Doug Gilbert <dgilbert@xxxxxxxxxxxx>
Cc: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
Cc: "James E.J. Bottomley" <JBottomley@xxxxxxxxxxxxx>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@xxxxxxxxxxx>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@xxxxxxxxxxx>
---
drivers/scsi/constants.c | 932
-------------------------------------------
drivers/scsi/scsi_trace.c | 920
++++++++++++++++++++++++++++++++++++++++++
include/scsi/scsi_dbg.h | 2
include/trace/events/scsi.h | 10
4 files changed, 928 insertions(+), 936 deletions(-)
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index 85b75c8..ce9ceb8 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -14,12 +14,6 @@
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_eh.h>
-#include <scsi/scsi_dbg.h>
-
-#include <trace/events/scsi.h>
/* Commands with service actions that change the command name */
#define SERVICE_ACTION_IN_12 0xab
@@ -429,929 +423,3 @@ void scsi_print_command(struct scsi_cmnd *cmd)
print_opcode_name(cmd->device, devname, cmd->cmnd, cmd->cmd_len);
}
EXPORT_SYMBOL(scsi_print_command);
-
-#ifdef CONFIG_SCSI_CONSTANTS
-
-struct error_info {
- unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */
- const char * text;
-};
-
-/*
- * The canonical list of T10 Additional Sense Codes is available at:
- * http://www.t10.org/lists/asc-num.txt [most recent: 20130605]
- */
-
-static const struct error_info additional[] =
-{
- {0x0000, "No additional sense information"},
- {0x0001, "Filemark detected"},
- {0x0002, "End-of-partition/medium detected"},
- {0x0003, "Setmark detected"},
- {0x0004, "Beginning-of-partition/medium detected"},
- {0x0005, "End-of-data detected"},
- {0x0006, "I/O process terminated"},
- {0x0007, "Programmable early warning detected"},
- {0x0011, "Audio play operation in progress"},
- {0x0012, "Audio play operation paused"},
- {0x0013, "Audio play operation successfully completed"},
- {0x0014, "Audio play operation stopped due to error"},
- {0x0015, "No current audio status to return"},
- {0x0016, "Operation in progress"},
- {0x0017, "Cleaning requested"},
- {0x0018, "Erase operation in progress"},
- {0x0019, "Locate operation in progress"},
- {0x001A, "Rewind operation in progress"},
- {0x001B, "Set capacity operation in progress"},
- {0x001C, "Verify operation in progress"},
- {0x001D, "ATA pass through information available"},
- {0x001E, "Conflicting SA creation request"},
- {0x001F, "Logical unit transitioning to another power condition"},
- {0x0020, "Extended copy information available"},
-
- {0x0100, "No index/sector signal"},
-
- {0x0200, "No seek complete"},
-
- {0x0300, "Peripheral device write fault"},
- {0x0301, "No write current"},
- {0x0302, "Excessive write errors"},
-
- {0x0400, "Logical unit not ready, cause not reportable"},
- {0x0401, "Logical unit is in process of becoming ready"},
- {0x0402, "Logical unit not ready, initializing command required"},
- {0x0403, "Logical unit not ready, manual intervention required"},
- {0x0404, "Logical unit not ready, format in progress"},
- {0x0405, "Logical unit not ready, rebuild in progress"},
- {0x0406, "Logical unit not ready, recalculation in progress"},
- {0x0407, "Logical unit not ready, operation in progress"},
- {0x0408, "Logical unit not ready, long write in progress"},
- {0x0409, "Logical unit not ready, self-test in progress"},
- {0x040A, "Logical unit not accessible, asymmetric access state "
- "transition"},
- {0x040B, "Logical unit not accessible, target port in standby
state"},
- {0x040C, "Logical unit not accessible, target port in unavailable "
- "state"},
- {0x040D, "Logical unit not ready, structure check required"},
- {0x0410, "Logical unit not ready, auxiliary memory not accessible"},
- {0x0411, "Logical unit not ready, notify (enable spinup) required"},
- {0x0412, "Logical unit not ready, offline"},
- {0x0413, "Logical unit not ready, SA creation in progress"},
- {0x0414, "Logical unit not ready, space allocation in progress"},
- {0x0415, "Logical unit not ready, robotics disabled"},
- {0x0416, "Logical unit not ready, configuration required"},
- {0x0417, "Logical unit not ready, calibration required"},
- {0x0418, "Logical unit not ready, a door is open"},
- {0x0419, "Logical unit not ready, operating in sequential mode"},
- {0x041A, "Logical unit not ready, start stop unit command in "
- "progress"},
- {0x041B, "Logical unit not ready, sanitize in progress"},
- {0x041C, "Logical unit not ready, additional power use not yet "
- "granted"},
- {0x041D, "Logical unit not ready, configuration in progress"},
-
- {0x0500, "Logical unit does not respond to selection"},
-
- {0x0600, "No reference position found"},
-
- {0x0700, "Multiple peripheral devices selected"},
-
- {0x0800, "Logical unit communication failure"},
- {0x0801, "Logical unit communication time-out"},
- {0x0802, "Logical unit communication parity error"},
- {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"},
- {0x0804, "Unreachable copy target"},
-
- {0x0900, "Track following error"},
- {0x0901, "Tracking servo failure"},
- {0x0902, "Focus servo failure"},
- {0x0903, "Spindle servo failure"},
- {0x0904, "Head select fault"},
-
- {0x0A00, "Error log overflow"},
-
- {0x0B00, "Warning"},
- {0x0B01, "Warning - specified temperature exceeded"},
- {0x0B02, "Warning - enclosure degraded"},
- {0x0B03, "Warning - background self-test failed"},
- {0x0B04, "Warning - background pre-scan detected medium error"},
- {0x0B05, "Warning - background medium scan detected medium error"},
- {0x0B06, "Warning - non-volatile cache now volatile"},
- {0x0B07, "Warning - degraded power to non-volatile cache"},
- {0x0B08, "Warning - power loss expected"},
- {0x0B09, "Warning - device statistics notification active"},
-
- {0x0C00, "Write error"},
- {0x0C01, "Write error - recovered with auto reallocation"},
- {0x0C02, "Write error - auto reallocation failed"},
- {0x0C03, "Write error - recommend reassignment"},
- {0x0C04, "Compression check miscompare error"},
- {0x0C05, "Data expansion occurred during compression"},
- {0x0C06, "Block not compressible"},
- {0x0C07, "Write error - recovery needed"},
- {0x0C08, "Write error - recovery failed"},
- {0x0C09, "Write error - loss of streaming"},
- {0x0C0A, "Write error - padding blocks added"},
- {0x0C0B, "Auxiliary memory write error"},
- {0x0C0C, "Write error - unexpected unsolicited data"},
- {0x0C0D, "Write error - not enough unsolicited data"},
- {0x0C0E, "Multiple write errors"},
- {0x0C0F, "Defects in error window"},
-
- {0x0D00, "Error detected by third party temporary initiator"},
- {0x0D01, "Third party device failure"},
- {0x0D02, "Copy target device not reachable"},
- {0x0D03, "Incorrect copy target device type"},
- {0x0D04, "Copy target device data underrun"},
- {0x0D05, "Copy target device data overrun"},
-
- {0x0E00, "Invalid information unit"},
- {0x0E01, "Information unit too short"},
- {0x0E02, "Information unit too long"},
- {0x0E03, "Invalid field in command information unit"},
-
- {0x1000, "Id CRC or ECC error"},
- {0x1001, "Logical block guard check failed"},
- {0x1002, "Logical block application tag check failed"},
- {0x1003, "Logical block reference tag check failed"},
- {0x1004, "Logical block protection error on recover buffered data"},
- {0x1005, "Logical block protection method error"},
-
- {0x1100, "Unrecovered read error"},
- {0x1101, "Read retries exhausted"},
- {0x1102, "Error too long to correct"},
- {0x1103, "Multiple read errors"},
- {0x1104, "Unrecovered read error - auto reallocate failed"},
- {0x1105, "L-EC uncorrectable error"},
- {0x1106, "CIRC unrecovered error"},
- {0x1107, "Data re-synchronization error"},
- {0x1108, "Incomplete block read"},
- {0x1109, "No gap found"},
- {0x110A, "Miscorrected error"},
- {0x110B, "Unrecovered read error - recommend reassignment"},
- {0x110C, "Unrecovered read error - recommend rewrite the data"},
- {0x110D, "De-compression CRC error"},
- {0x110E, "Cannot decompress using declared algorithm"},
- {0x110F, "Error reading UPC/EAN number"},
- {0x1110, "Error reading ISRC number"},
- {0x1111, "Read error - loss of streaming"},
- {0x1112, "Auxiliary memory read error"},
- {0x1113, "Read error - failed retransmission request"},
- {0x1114, "Read error - lba marked bad by application client"},
- {0x1115, "Write after sanitize required"},
-
- {0x1200, "Address mark not found for id field"},
-
- {0x1300, "Address mark not found for data field"},
-
- {0x1400, "Recorded entity not found"},
- {0x1401, "Record not found"},
- {0x1402, "Filemark or setmark not found"},
- {0x1403, "End-of-data not found"},
- {0x1404, "Block sequence error"},
- {0x1405, "Record not found - recommend reassignment"},
- {0x1406, "Record not found - data auto-reallocated"},
- {0x1407, "Locate operation failure"},
-
- {0x1500, "Random positioning error"},
- {0x1501, "Mechanical positioning error"},
- {0x1502, "Positioning error detected by read of medium"},
-
- {0x1600, "Data synchronization mark error"},
- {0x1601, "Data sync error - data rewritten"},
- {0x1602, "Data sync error - recommend rewrite"},
- {0x1603, "Data sync error - data auto-reallocated"},
- {0x1604, "Data sync error - recommend reassignment"},
-
- {0x1700, "Recovered data with no error correction applied"},
- {0x1701, "Recovered data with retries"},
- {0x1702, "Recovered data with positive head offset"},
- {0x1703, "Recovered data with negative head offset"},
- {0x1704, "Recovered data with retries and/or circ applied"},
- {0x1705, "Recovered data using previous sector id"},
- {0x1706, "Recovered data without ECC - data auto-reallocated"},
- {0x1707, "Recovered data without ECC - recommend reassignment"},
- {0x1708, "Recovered data without ECC - recommend rewrite"},
- {0x1709, "Recovered data without ECC - data rewritten"},
-
- {0x1800, "Recovered data with error correction applied"},
- {0x1801, "Recovered data with error corr. & retries applied"},
- {0x1802, "Recovered data - data auto-reallocated"},
- {0x1803, "Recovered data with CIRC"},
- {0x1804, "Recovered data with L-EC"},
- {0x1805, "Recovered data - recommend reassignment"},
- {0x1806, "Recovered data - recommend rewrite"},
- {0x1807, "Recovered data with ECC - data rewritten"},
- {0x1808, "Recovered data with linking"},
-
- {0x1900, "Defect list error"},
- {0x1901, "Defect list not available"},
- {0x1902, "Defect list error in primary list"},
- {0x1903, "Defect list error in grown list"},
-
- {0x1A00, "Parameter list length error"},
-
- {0x1B00, "Synchronous data transfer error"},
-
- {0x1C00, "Defect list not found"},
- {0x1C01, "Primary defect list not found"},
- {0x1C02, "Grown defect list not found"},
-
- {0x1D00, "Miscompare during verify operation"},
- {0x1D01, "Miscompare verify of unmapped LBA"},
-
- {0x1E00, "Recovered id with ECC correction"},
-
- {0x1F00, "Partial defect list transfer"},
-
- {0x2000, "Invalid command operation code"},
- {0x2001, "Access denied - initiator pending-enrolled"},
- {0x2002, "Access denied - no access rights"},
- {0x2003, "Access denied - invalid mgmt id key"},
- {0x2004, "Illegal command while in write capable state"},
- {0x2005, "Obsolete"},
- {0x2006, "Illegal command while in explicit address mode"},
- {0x2007, "Illegal command while in implicit address mode"},
- {0x2008, "Access denied - enrollment conflict"},
- {0x2009, "Access denied - invalid LU identifier"},
- {0x200A, "Access denied - invalid proxy token"},
- {0x200B, "Access denied - ACL LUN conflict"},
- {0x200C, "Illegal command when not in append-only mode"},
-
- {0x2100, "Logical block address out of range"},
- {0x2101, "Invalid element address"},
- {0x2102, "Invalid address for write"},
- {0x2103, "Invalid write crossing layer jump"},
-
- {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
-
- {0x2300, "Invalid token operation, cause not reportable"},
- {0x2301, "Invalid token operation, unsupported token type"},
- {0x2302, "Invalid token operation, remote token usage not
supported"},
- {0x2303, "Invalid token operation, remote rod token creation not "
- "supported"},
- {0x2304, "Invalid token operation, token unknown"},
- {0x2305, "Invalid token operation, token corrupt"},
- {0x2306, "Invalid token operation, token revoked"},
- {0x2307, "Invalid token operation, token expired"},
- {0x2308, "Invalid token operation, token cancelled"},
- {0x2309, "Invalid token operation, token deleted"},
- {0x230A, "Invalid token operation, invalid token length"},
-
- {0x2400, "Invalid field in cdb"},
- {0x2401, "CDB decryption error"},
- {0x2402, "Obsolete"},
- {0x2403, "Obsolete"},
- {0x2404, "Security audit value frozen"},
- {0x2405, "Security working key frozen"},
- {0x2406, "Nonce not unique"},
- {0x2407, "Nonce timestamp out of range"},
- {0x2408, "Invalid XCDB"},
-
- {0x2500, "Logical unit not supported"},
-
- {0x2600, "Invalid field in parameter list"},
- {0x2601, "Parameter not supported"},
- {0x2602, "Parameter value invalid"},
- {0x2603, "Threshold parameters not supported"},
- {0x2604, "Invalid release of persistent reservation"},
- {0x2605, "Data decryption error"},
- {0x2606, "Too many target descriptors"},
- {0x2607, "Unsupported target descriptor type code"},
- {0x2608, "Too many segment descriptors"},
- {0x2609, "Unsupported segment descriptor type code"},
- {0x260A, "Unexpected inexact segment"},
- {0x260B, "Inline data length exceeded"},
- {0x260C, "Invalid operation for copy source or destination"},
- {0x260D, "Copy segment granularity violation"},
- {0x260E, "Invalid parameter while port is enabled"},
- {0x260F, "Invalid data-out buffer integrity check value"},
- {0x2610, "Data decryption key fail limit reached"},
- {0x2611, "Incomplete key-associated data set"},
- {0x2612, "Vendor specific key reference not found"},
-
- {0x2700, "Write protected"},
- {0x2701, "Hardware write protected"},
- {0x2702, "Logical unit software write protected"},
- {0x2703, "Associated write protect"},
- {0x2704, "Persistent write protect"},
- {0x2705, "Permanent write protect"},
- {0x2706, "Conditional write protect"},
- {0x2707, "Space allocation failed write protect"},
-
- {0x2800, "Not ready to ready change, medium may have changed"},
- {0x2801, "Import or export element accessed"},
- {0x2802, "Format-layer may have changed"},
- {0x2803, "Import/export element accessed, medium changed"},
-
- {0x2900, "Power on, reset, or bus device reset occurred"},
- {0x2901, "Power on occurred"},
- {0x2902, "Scsi bus reset occurred"},
- {0x2903, "Bus device reset function occurred"},
- {0x2904, "Device internal reset"},
- {0x2905, "Transceiver mode changed to single-ended"},
- {0x2906, "Transceiver mode changed to lvd"},
- {0x2907, "I_T nexus loss occurred"},
-
- {0x2A00, "Parameters changed"},
- {0x2A01, "Mode parameters changed"},
- {0x2A02, "Log parameters changed"},
- {0x2A03, "Reservations preempted"},
- {0x2A04, "Reservations released"},
- {0x2A05, "Registrations preempted"},
- {0x2A06, "Asymmetric access state changed"},
- {0x2A07, "Implicit asymmetric access state transition failed"},
- {0x2A08, "Priority changed"},
- {0x2A09, "Capacity data has changed"},
- {0x2A0A, "Error history I_T nexus cleared"},
- {0x2A0B, "Error history snapshot released"},
- {0x2A0C, "Error recovery attributes have changed"},
- {0x2A0D, "Data encryption capabilities changed"},
- {0x2A10, "Timestamp changed"},
- {0x2A11, "Data encryption parameters changed by another i_t nexus"},
- {0x2A12, "Data encryption parameters changed by vendor specific "
- "event"},
- {0x2A13, "Data encryption key instance counter has changed"},
- {0x2A14, "SA creation capabilities data has changed"},
- {0x2A15, "Medium removal prevention preempted"},
-
- {0x2B00, "Copy cannot execute since host cannot disconnect"},
-
- {0x2C00, "Command sequence error"},
- {0x2C01, "Too many windows specified"},
- {0x2C02, "Invalid combination of windows specified"},
- {0x2C03, "Current program area is not empty"},
- {0x2C04, "Current program area is empty"},
- {0x2C05, "Illegal power condition request"},
- {0x2C06, "Persistent prevent conflict"},
- {0x2C07, "Previous busy status"},
- {0x2C08, "Previous task set full status"},
- {0x2C09, "Previous reservation conflict status"},
- {0x2C0A, "Partition or collection contains user objects"},
- {0x2C0B, "Not reserved"},
- {0x2C0C, "Orwrite generation does not match"},
-
- {0x2D00, "Overwrite error on update in place"},
-
- {0x2E00, "Insufficient time for operation"},
-
- {0x2F00, "Commands cleared by another initiator"},
- {0x2F01, "Commands cleared by power loss notification"},
- {0x2F02, "Commands cleared by device server"},
- {0x2F03, "Some commands cleared by queuing layer event"},
-
- {0x3000, "Incompatible medium installed"},
- {0x3001, "Cannot read medium - unknown format"},
- {0x3002, "Cannot read medium - incompatible format"},
- {0x3003, "Cleaning cartridge installed"},
- {0x3004, "Cannot write medium - unknown format"},
- {0x3005, "Cannot write medium - incompatible format"},
- {0x3006, "Cannot format medium - incompatible medium"},
- {0x3007, "Cleaning failure"},
- {0x3008, "Cannot write - application code mismatch"},
- {0x3009, "Current session not fixated for append"},
- {0x300A, "Cleaning request rejected"},
- {0x300C, "WORM medium - overwrite attempted"},
- {0x300D, "WORM medium - integrity check"},
- {0x3010, "Medium not formatted"},
- {0x3011, "Incompatible volume type"},
- {0x3012, "Incompatible volume qualifier"},
- {0x3013, "Cleaning volume expired"},
-
- {0x3100, "Medium format corrupted"},
- {0x3101, "Format command failed"},
- {0x3102, "Zoned formatting failed due to spare linking"},
- {0x3103, "Sanitize command failed"},
-
- {0x3200, "No defect spare location available"},
- {0x3201, "Defect list update failure"},
-
- {0x3300, "Tape length error"},
-
- {0x3400, "Enclosure failure"},
-
- {0x3500, "Enclosure services failure"},
- {0x3501, "Unsupported enclosure function"},
- {0x3502, "Enclosure services unavailable"},
- {0x3503, "Enclosure services transfer failure"},
- {0x3504, "Enclosure services transfer refused"},
- {0x3505, "Enclosure services checksum error"},
-
- {0x3600, "Ribbon, ink, or toner failure"},
-
- {0x3700, "Rounded parameter"},
-
- {0x3800, "Event status notification"},
- {0x3802, "Esn - power management class event"},
- {0x3804, "Esn - media class event"},
- {0x3806, "Esn - device busy class event"},
- {0x3807, "Thin Provisioning soft threshold reached"},
-
- {0x3900, "Saving parameters not supported"},
-
- {0x3A00, "Medium not present"},
- {0x3A01, "Medium not present - tray closed"},
- {0x3A02, "Medium not present - tray open"},
- {0x3A03, "Medium not present - loadable"},
- {0x3A04, "Medium not present - medium auxiliary memory accessible"},
-
- {0x3B00, "Sequential positioning error"},
- {0x3B01, "Tape position error at beginning-of-medium"},
- {0x3B02, "Tape position error at end-of-medium"},
- {0x3B03, "Tape or electronic vertical forms unit not ready"},
- {0x3B04, "Slew failure"},
- {0x3B05, "Paper jam"},
- {0x3B06, "Failed to sense top-of-form"},
- {0x3B07, "Failed to sense bottom-of-form"},
- {0x3B08, "Reposition error"},
- {0x3B09, "Read past end of medium"},
- {0x3B0A, "Read past beginning of medium"},
- {0x3B0B, "Position past end of medium"},
- {0x3B0C, "Position past beginning of medium"},
- {0x3B0D, "Medium destination element full"},
- {0x3B0E, "Medium source element empty"},
- {0x3B0F, "End of medium reached"},
- {0x3B11, "Medium magazine not accessible"},
- {0x3B12, "Medium magazine removed"},
- {0x3B13, "Medium magazine inserted"},
- {0x3B14, "Medium magazine locked"},
- {0x3B15, "Medium magazine unlocked"},
- {0x3B16, "Mechanical positioning or changer error"},
- {0x3B17, "Read past end of user object"},
- {0x3B18, "Element disabled"},
- {0x3B19, "Element enabled"},
- {0x3B1A, "Data transfer device removed"},
- {0x3B1B, "Data transfer device inserted"},
- {0x3B1C, "Too many logical objects on partition to support "
- "operation"},
-
- {0x3D00, "Invalid bits in identify message"},
-
- {0x3E00, "Logical unit has not self-configured yet"},
- {0x3E01, "Logical unit failure"},
- {0x3E02, "Timeout on logical unit"},
- {0x3E03, "Logical unit failed self-test"},
- {0x3E04, "Logical unit unable to update self-test log"},
-
- {0x3F00, "Target operating conditions have changed"},
- {0x3F01, "Microcode has been changed"},
- {0x3F02, "Changed operating definition"},
- {0x3F03, "Inquiry data has changed"},
- {0x3F04, "Component device attached"},
- {0x3F05, "Device identifier changed"},
- {0x3F06, "Redundancy group created or modified"},
- {0x3F07, "Redundancy group deleted"},
- {0x3F08, "Spare created or modified"},
- {0x3F09, "Spare deleted"},
- {0x3F0A, "Volume set created or modified"},
- {0x3F0B, "Volume set deleted"},
- {0x3F0C, "Volume set deassigned"},
- {0x3F0D, "Volume set reassigned"},
- {0x3F0E, "Reported luns data has changed"},
- {0x3F0F, "Echo buffer overwritten"},
- {0x3F10, "Medium loadable"},
- {0x3F11, "Medium auxiliary memory accessible"},
- {0x3F12, "iSCSI IP address added"},
- {0x3F13, "iSCSI IP address removed"},
- {0x3F14, "iSCSI IP address changed"},
- {0x3F15, "Inspect referrals sense descriptors"},
-/*
- * {0x40NN, "Ram failure"},
- * {0x40NN, "Diagnostic failure on component nn"},
- * {0x41NN, "Data path failure"},
- * {0x42NN, "Power-on or self-test failure"},
- */
- {0x4300, "Message error"},
-
- {0x4400, "Internal target failure"},
- {0x4401, "Persistent reservation information lost"},
- {0x4471, "ATA device failed set features"},
-
- {0x4500, "Select or reselect failure"},
-
- {0x4600, "Unsuccessful soft reset"},
-
- {0x4700, "Scsi parity error"},
- {0x4701, "Data phase CRC error detected"},
- {0x4702, "Scsi parity error detected during st data phase"},
- {0x4703, "Information unit iuCRC error detected"},
- {0x4704, "Asynchronous information protection error detected"},
- {0x4705, "Protocol service CRC error"},
- {0x4706, "Phy test function in progress"},
- {0x477f, "Some commands cleared by iSCSI Protocol event"},
-
- {0x4800, "Initiator detected error message received"},
-
- {0x4900, "Invalid message error"},
-
- {0x4A00, "Command phase error"},
-
- {0x4B00, "Data phase error"},
- {0x4B01, "Invalid target port transfer tag received"},
- {0x4B02, "Too much write data"},
- {0x4B03, "Ack/nak timeout"},
- {0x4B04, "Nak received"},
- {0x4B05, "Data offset error"},
- {0x4B06, "Initiator response timeout"},
- {0x4B07, "Connection lost"},
- {0x4B08, "Data-in buffer overflow - data buffer size"},
- {0x4B09, "Data-in buffer overflow - data buffer descriptor area"},
- {0x4B0A, "Data-in buffer error"},
- {0x4B0B, "Data-out buffer overflow - data buffer size"},
- {0x4B0C, "Data-out buffer overflow - data buffer descriptor area"},
- {0x4B0D, "Data-out buffer error"},
- {0x4B0E, "PCIe fabric error"},
- {0x4B0F, "PCIe completion timeout"},
- {0x4B10, "PCIe completer abort"},
- {0x4B11, "PCIe poisoned tlp received"},
- {0x4B12, "PCIe eCRC check failed"},
- {0x4B13, "PCIe unsupported request"},
- {0x4B14, "PCIe acs violation"},
- {0x4B15, "PCIe tlp prefix blocked"},
-
- {0x4C00, "Logical unit failed self-configuration"},
-/*
- * {0x4DNN, "Tagged overlapped commands (nn = queue tag)"},
- */
- {0x4E00, "Overlapped commands attempted"},
-
- {0x5000, "Write append error"},
- {0x5001, "Write append position error"},
- {0x5002, "Position error related to timing"},
-
- {0x5100, "Erase failure"},
- {0x5101, "Erase failure - incomplete erase operation detected"},
-
- {0x5200, "Cartridge fault"},
-
- {0x5300, "Media load or eject failed"},
- {0x5301, "Unload tape failure"},
- {0x5302, "Medium removal prevented"},
- {0x5303, "Medium removal prevented by data transfer element"},
- {0x5304, "Medium thread or unthread failure"},
- {0x5305, "Volume identifier invalid"},
- {0x5306, "Volume identifier missing"},
- {0x5307, "Duplicate volume identifier"},
- {0x5308, "Element status unknown"},
-
- {0x5400, "Scsi to host system interface failure"},
-
- {0x5500, "System resource failure"},
- {0x5501, "System buffer full"},
- {0x5502, "Insufficient reservation resources"},
- {0x5503, "Insufficient resources"},
- {0x5504, "Insufficient registration resources"},
- {0x5505, "Insufficient access control resources"},
- {0x5506, "Auxiliary memory out of space"},
- {0x5507, "Quota error"},
- {0x5508, "Maximum number of supplemental decryption keys exceeded"},
- {0x5509, "Medium auxiliary memory not accessible"},
- {0x550A, "Data currently unavailable"},
- {0x550B, "Insufficient power for operation"},
- {0x550C, "Insufficient resources to create rod"},
- {0x550D, "Insufficient resources to create rod token"},
-
- {0x5700, "Unable to recover table-of-contents"},
-
- {0x5800, "Generation does not exist"},
-
- {0x5900, "Updated block read"},
-
- {0x5A00, "Operator request or state change input"},
- {0x5A01, "Operator medium removal request"},
- {0x5A02, "Operator selected write protect"},
- {0x5A03, "Operator selected write permit"},
-
- {0x5B00, "Log exception"},
- {0x5B01, "Threshold condition met"},
- {0x5B02, "Log counter at maximum"},
- {0x5B03, "Log list codes exhausted"},
-
- {0x5C00, "Rpl status change"},
- {0x5C01, "Spindles synchronized"},
- {0x5C02, "Spindles not synchronized"},
-
- {0x5D00, "Failure prediction threshold exceeded"},
- {0x5D01, "Media failure prediction threshold exceeded"},
- {0x5D02, "Logical unit failure prediction threshold exceeded"},
- {0x5D03, "Spare area exhaustion prediction threshold exceeded"},
- {0x5D10, "Hardware impending failure general hard drive failure"},
- {0x5D11, "Hardware impending failure drive error rate too high"},
- {0x5D12, "Hardware impending failure data error rate too high"},
- {0x5D13, "Hardware impending failure seek error rate too high"},
- {0x5D14, "Hardware impending failure too many block reassigns"},
- {0x5D15, "Hardware impending failure access times too high"},
- {0x5D16, "Hardware impending failure start unit times too high"},
- {0x5D17, "Hardware impending failure channel parametrics"},
- {0x5D18, "Hardware impending failure controller detected"},
- {0x5D19, "Hardware impending failure throughput performance"},
- {0x5D1A, "Hardware impending failure seek time performance"},
- {0x5D1B, "Hardware impending failure spin-up retry count"},
- {0x5D1C, "Hardware impending failure drive calibration retry
count"},
- {0x5D20, "Controller impending failure general hard drive failure"},
- {0x5D21, "Controller impending failure drive error rate too high"},
- {0x5D22, "Controller impending failure data error rate too high"},
- {0x5D23, "Controller impending failure seek error rate too high"},
- {0x5D24, "Controller impending failure too many block reassigns"},
- {0x5D25, "Controller impending failure access times too high"},
- {0x5D26, "Controller impending failure start unit times too high"},
- {0x5D27, "Controller impending failure channel parametrics"},
- {0x5D28, "Controller impending failure controller detected"},
- {0x5D29, "Controller impending failure throughput performance"},
- {0x5D2A, "Controller impending failure seek time performance"},
- {0x5D2B, "Controller impending failure spin-up retry count"},
- {0x5D2C, "Controller impending failure drive calibration retry
count"},
- {0x5D30, "Data channel impending failure general hard drive
failure"},
- {0x5D31, "Data channel impending failure drive error rate too
high"},
- {0x5D32, "Data channel impending failure data error rate too high"},
- {0x5D33, "Data channel impending failure seek error rate too high"},
- {0x5D34, "Data channel impending failure too many block reassigns"},
- {0x5D35, "Data channel impending failure access times too high"},
- {0x5D36, "Data channel impending failure start unit times too
high"},
- {0x5D37, "Data channel impending failure channel parametrics"},
- {0x5D38, "Data channel impending failure controller detected"},
- {0x5D39, "Data channel impending failure throughput performance"},
- {0x5D3A, "Data channel impending failure seek time performance"},
- {0x5D3B, "Data channel impending failure spin-up retry count"},
- {0x5D3C, "Data channel impending failure drive calibration retry "
- "count"},
- {0x5D40, "Servo impending failure general hard drive failure"},
- {0x5D41, "Servo impending failure drive error rate too high"},
- {0x5D42, "Servo impending failure data error rate too high"},
- {0x5D43, "Servo impending failure seek error rate too high"},
- {0x5D44, "Servo impending failure too many block reassigns"},
- {0x5D45, "Servo impending failure access times too high"},
- {0x5D46, "Servo impending failure start unit times too high"},
- {0x5D47, "Servo impending failure channel parametrics"},
- {0x5D48, "Servo impending failure controller detected"},
- {0x5D49, "Servo impending failure throughput performance"},
- {0x5D4A, "Servo impending failure seek time performance"},
- {0x5D4B, "Servo impending failure spin-up retry count"},
- {0x5D4C, "Servo impending failure drive calibration retry count"},
- {0x5D50, "Spindle impending failure general hard drive failure"},
- {0x5D51, "Spindle impending failure drive error rate too high"},
- {0x5D52, "Spindle impending failure data error rate too high"},
- {0x5D53, "Spindle impending failure seek error rate too high"},
- {0x5D54, "Spindle impending failure too many block reassigns"},
- {0x5D55, "Spindle impending failure access times too high"},
- {0x5D56, "Spindle impending failure start unit times too high"},
- {0x5D57, "Spindle impending failure channel parametrics"},
- {0x5D58, "Spindle impending failure controller detected"},
- {0x5D59, "Spindle impending failure throughput performance"},
- {0x5D5A, "Spindle impending failure seek time performance"},
- {0x5D5B, "Spindle impending failure spin-up retry count"},
- {0x5D5C, "Spindle impending failure drive calibration retry count"},
- {0x5D60, "Firmware impending failure general hard drive failure"},
- {0x5D61, "Firmware impending failure drive error rate too high"},
- {0x5D62, "Firmware impending failure data error rate too high"},
- {0x5D63, "Firmware impending failure seek error rate too high"},
- {0x5D64, "Firmware impending failure too many block reassigns"},
- {0x5D65, "Firmware impending failure access times too high"},
- {0x5D66, "Firmware impending failure start unit times too high"},
- {0x5D67, "Firmware impending failure channel parametrics"},
- {0x5D68, "Firmware impending failure controller detected"},
- {0x5D69, "Firmware impending failure throughput performance"},
- {0x5D6A, "Firmware impending failure seek time performance"},
- {0x5D6B, "Firmware impending failure spin-up retry count"},
- {0x5D6C, "Firmware impending failure drive calibration retry
count"},
- {0x5DFF, "Failure prediction threshold exceeded (false)"},
-
- {0x5E00, "Low power condition on"},
- {0x5E01, "Idle condition activated by timer"},
- {0x5E02, "Standby condition activated by timer"},
- {0x5E03, "Idle condition activated by command"},
- {0x5E04, "Standby condition activated by command"},
- {0x5E05, "Idle_b condition activated by timer"},
- {0x5E06, "Idle_b condition activated by command"},
- {0x5E07, "Idle_c condition activated by timer"},
- {0x5E08, "Idle_c condition activated by command"},
- {0x5E09, "Standby_y condition activated by timer"},
- {0x5E0A, "Standby_y condition activated by command"},
- {0x5E41, "Power state change to active"},
- {0x5E42, "Power state change to idle"},
- {0x5E43, "Power state change to standby"},
- {0x5E45, "Power state change to sleep"},
- {0x5E47, "Power state change to device control"},
-
- {0x6000, "Lamp failure"},
-
- {0x6100, "Video acquisition error"},
- {0x6101, "Unable to acquire video"},
- {0x6102, "Out of focus"},
-
- {0x6200, "Scan head positioning error"},
-
- {0x6300, "End of user area encountered on this track"},
- {0x6301, "Packet does not fit in available space"},
-
- {0x6400, "Illegal mode for this track"},
- {0x6401, "Invalid packet size"},
-
- {0x6500, "Voltage fault"},
-
- {0x6600, "Automatic document feeder cover up"},
- {0x6601, "Automatic document feeder lift up"},
- {0x6602, "Document jam in automatic document feeder"},
- {0x6603, "Document miss feed automatic in document feeder"},
-
- {0x6700, "Configuration failure"},
- {0x6701, "Configuration of incapable logical units failed"},
- {0x6702, "Add logical unit failed"},
- {0x6703, "Modification of logical unit failed"},
- {0x6704, "Exchange of logical unit failed"},
- {0x6705, "Remove of logical unit failed"},
- {0x6706, "Attachment of logical unit failed"},
- {0x6707, "Creation of logical unit failed"},
- {0x6708, "Assign failure occurred"},
- {0x6709, "Multiply assigned logical unit"},
- {0x670A, "Set target port groups command failed"},
- {0x670B, "ATA device feature not enabled"},
-
- {0x6800, "Logical unit not configured"},
- {0x6801, "Subsidiary logical unit not configured"},
-
- {0x6900, "Data loss on logical unit"},
- {0x6901, "Multiple logical unit failures"},
- {0x6902, "Parity/data mismatch"},
-
- {0x6A00, "Informational, refer to log"},
-
- {0x6B00, "State change has occurred"},
- {0x6B01, "Redundancy level got better"},
- {0x6B02, "Redundancy level got worse"},
-
- {0x6C00, "Rebuild failure occurred"},
-
- {0x6D00, "Recalculate failure occurred"},
-
- {0x6E00, "Command to logical unit failed"},
-
- {0x6F00, "Copy protection key exchange failure - authentication "
- "failure"},
- {0x6F01, "Copy protection key exchange failure - key not present"},
- {0x6F02, "Copy protection key exchange failure - key not
established"},
- {0x6F03, "Read of scrambled sector without authentication"},
- {0x6F04, "Media region code is mismatched to logical unit region"},
- {0x6F05, "Drive region must be permanent/region reset count error"},
- {0x6F06, "Insufficient block count for binding nonce recording"},
- {0x6F07, "Conflict in binding nonce recording"},
-/*
- * {0x70NN, "Decompression exception short algorithm id of nn"},
- */
- {0x7100, "Decompression exception long algorithm id"},
-
- {0x7200, "Session fixation error"},
- {0x7201, "Session fixation error writing lead-in"},
- {0x7202, "Session fixation error writing lead-out"},
- {0x7203, "Session fixation error - incomplete track in session"},
- {0x7204, "Empty or partially written reserved track"},
- {0x7205, "No more track reservations allowed"},
- {0x7206, "RMZ extension is not allowed"},
- {0x7207, "No more test zone extensions are allowed"},
-
- {0x7300, "Cd control error"},
- {0x7301, "Power calibration area almost full"},
- {0x7302, "Power calibration area is full"},
- {0x7303, "Power calibration area error"},
- {0x7304, "Program memory area update failure"},
- {0x7305, "Program memory area is full"},
- {0x7306, "RMA/PMA is almost full"},
- {0x7310, "Current power calibration area almost full"},
- {0x7311, "Current power calibration area is full"},
- {0x7317, "RDZ is full"},
-
- {0x7400, "Security error"},
- {0x7401, "Unable to decrypt data"},
- {0x7402, "Unencrypted data encountered while decrypting"},
- {0x7403, "Incorrect data encryption key"},
- {0x7404, "Cryptographic integrity validation failed"},
- {0x7405, "Error decrypting data"},
- {0x7406, "Unknown signature verification key"},
- {0x7407, "Encryption parameters not useable"},
- {0x7408, "Digital signature validation failure"},
- {0x7409, "Encryption mode mismatch on read"},
- {0x740A, "Encrypted block not raw read enabled"},
- {0x740B, "Incorrect Encryption parameters"},
- {0x740C, "Unable to decrypt parameter list"},
- {0x740D, "Encryption algorithm disabled"},
- {0x7410, "SA creation parameter value invalid"},
- {0x7411, "SA creation parameter value rejected"},
- {0x7412, "Invalid SA usage"},
- {0x7421, "Data Encryption configuration prevented"},
- {0x7430, "SA creation parameter not supported"},
- {0x7440, "Authentication failed"},
- {0x7461, "External data encryption key manager access error"},
- {0x7462, "External data encryption key manager error"},
- {0x7463, "External data encryption key not found"},
- {0x7464, "External data encryption request not authorized"},
- {0x746E, "External data encryption control timeout"},
- {0x746F, "External data encryption control error"},
- {0x7471, "Logical unit access not authorized"},
- {0x7479, "Security conflict in translated device"},
-
- {0, NULL}
-};
-
-struct error_info2 {
- unsigned char code1, code2_min, code2_max;
- const char * fmt;
-};
-
-static const struct error_info2 additional2[] =
-{
- {0x40, 0x00, 0x7f, "Ram failure (%x)"},
- {0x40, 0x80, 0xff, "Diagnostic failure on component (%x)"},
- {0x41, 0x00, 0xff, "Data path failure (%x)"},
- {0x42, 0x00, 0xff, "Power-on or self-test failure (%x)"},
- {0x4D, 0x00, 0xff, "Tagged overlapped commands (task tag %x)"},
- {0x70, 0x00, 0xff, "Decompression exception short algorithm id of
%x"},
- {0, 0, 0, NULL}
-};
-#endif
-
-/*
- * Get additional sense code string or NULL if not available.
- * This string may contain a "%x" and should be printed with ascq as
arg.
- */
-const char *
-scsi_extd_sense_format(unsigned char asc, unsigned char ascq) {
-#ifdef CONFIG_SCSI_CONSTANTS
- int i;
- unsigned short code = ((asc << 8) | ascq);
-
- for (i = 0; additional[i].text; i++)
- if (additional[i].code12 == code)
- return additional[i].text;
- for (i = 0; additional2[i].fmt; i++) {
- if (additional2[i].code1 == asc &&
- ascq >= additional2[i].code2_min &&
- ascq <= additional2[i].code2_max)
- return additional2[i].fmt;
- }
-#endif
- return NULL;
-}
-EXPORT_SYMBOL(scsi_extd_sense_format);
-
-void
-scsi_show_extd_sense(struct scsi_device *sdev, const char *name,
- unsigned char asc, unsigned char ascq)
-{
- const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq);
-
- if (extd_sense_fmt) {
- if (strstr(extd_sense_fmt, "%x")) {
- char sense_buf[50];
- sprintf(sense_buf, extd_sense_fmt, ascq);
- sdev_printk(KERN_INFO, sdev,
- "[%s] Add. Sense: %s", name, sense_buf);
- } else
- sdev_printk(KERN_INFO, sdev,
- "[%s] Add. Sense: %s\n",
- name, extd_sense_fmt);
- } else
- sdev_printk(KERN_INFO, sdev,
- "[%s] %sASC=0x%x %sASCQ=0x%x\n",
- name, asc >= 0x80 ? "<<vendor>> " : "", asc,
- asc < 0 && ascq >= 0x80 ? "<<vendor>> ": "",
- ascq);
-}
-EXPORT_SYMBOL(scsi_show_extd_sense);
-
-/*
- * Print normalized SCSI sense header with a prefix.
- */
-void
-scsi_print_sense_hdr(struct scsi_device *sdev, const char *name,
- struct scsi_sense_hdr *sshdr)
-{
- trace_scsi_print_sense(sdev, name, sshdr, NULL, 0, 0);
- scsi_show_extd_sense(sdev, name, sshdr->asc, sshdr->ascq);
-}
-EXPORT_SYMBOL(scsi_print_sense_hdr);
-
-/* Normalize and print sense buffer with name prefix */
-void __scsi_print_sense(struct scsi_device *sdev, const char *name,
- const unsigned char *sense_buffer, int sense_len)
-{
- struct scsi_sense_hdr sshdr;
- int raw;
-
- raw = !scsi_normalize_sense(sense_buffer, sense_len, &sshdr);
-
- trace_scsi_print_sense(sdev, name, &sshdr, sense_buffer, sense_len,
- raw);
- scsi_show_extd_sense(sdev, name, sshdr.asc, sshdr.ascq);
-}
-EXPORT_SYMBOL(__scsi_print_sense);
-
-/* Normalize and print sense buffer in SCSI command */
-void scsi_print_sense(struct scsi_cmnd *cmd)
-{
- const char *devname = cmd->request->rq_disk ?
- cmd->request->rq_disk->disk_name : "scsi";
-
- __scsi_print_sense(cmd->device, devname, cmd->sense_buffer,
- SCSI_SENSE_BUFFERSIZE);
-}
-EXPORT_SYMBOL(scsi_print_sense);
diff --git a/drivers/scsi/scsi_trace.c b/drivers/scsi/scsi_trace.c
index 2ecb1dc..60678d8 100644
--- a/drivers/scsi/scsi_trace.c
+++ b/drivers/scsi/scsi_trace.c
@@ -22,6 +22,7 @@
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
+#include <scsi/scsi_dbg.h>
#define SERVICE_ACTION16(cdb) (cdb[1] & 0x1f)
#define SERVICE_ACTION32(cdb) ((cdb[8] << 8) | cdb[9])
@@ -291,6 +292,841 @@ scsi_trace_parse_cdb(struct trace_seq *p,
unsigned char *cdb, int len)
}
#ifdef CONFIG_SCSI_CONSTANTS
+
+struct error_info {
+ unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */
+ const char *text;
+};
+
+/*
+ * The canonical list of T10 Additional Sense Codes is available at:
+ * http://www.t10.org/lists/asc-num.txt [most recent: 20130605]
+ */
+
+static const struct error_info additional[] =
+{
+ {0x0000, "No additional sense information"},
+ {0x0001, "Filemark detected"},
+ {0x0002, "End-of-partition/medium detected"},
+ {0x0003, "Setmark detected"},
+ {0x0004, "Beginning-of-partition/medium detected"},
+ {0x0005, "End-of-data detected"},
+ {0x0006, "I/O process terminated"},
+ {0x0007, "Programmable early warning detected"},
+ {0x0011, "Audio play operation in progress"},
+ {0x0012, "Audio play operation paused"},
+ {0x0013, "Audio play operation successfully completed"},
+ {0x0014, "Audio play operation stopped due to error"},
+ {0x0015, "No current audio status to return"},
+ {0x0016, "Operation in progress"},
+ {0x0017, "Cleaning requested"},
+ {0x0018, "Erase operation in progress"},
+ {0x0019, "Locate operation in progress"},
+ {0x001A, "Rewind operation in progress"},
+ {0x001B, "Set capacity operation in progress"},
+ {0x001C, "Verify operation in progress"},
+ {0x001D, "ATA pass through information available"},
+ {0x001E, "Conflicting SA creation request"},
+ {0x001F, "Logical unit transitioning to another power condition"},
+ {0x0020, "Extended copy information available"},
+
+ {0x0100, "No index/sector signal"},
+
+ {0x0200, "No seek complete"},
+
+ {0x0300, "Peripheral device write fault"},
+ {0x0301, "No write current"},
+ {0x0302, "Excessive write errors"},
+
+ {0x0400, "Logical unit not ready, cause not reportable"},
+ {0x0401, "Logical unit is in process of becoming ready"},
+ {0x0402, "Logical unit not ready, initializing command required"},
+ {0x0403, "Logical unit not ready, manual intervention required"},
+ {0x0404, "Logical unit not ready, format in progress"},
+ {0x0405, "Logical unit not ready, rebuild in progress"},
+ {0x0406, "Logical unit not ready, recalculation in progress"},
+ {0x0407, "Logical unit not ready, operation in progress"},
+ {0x0408, "Logical unit not ready, long write in progress"},
+ {0x0409, "Logical unit not ready, self-test in progress"},
+ {0x040A, "Logical unit not accessible, asymmetric access state "
+ "transition"},
+ {0x040B, "Logical unit not accessible, target port in standby
state"},
+ {0x040C, "Logical unit not accessible, target port in unavailable "
+ "state"},
+ {0x040D, "Logical unit not ready, structure check required"},
+ {0x0410, "Logical unit not ready, auxiliary memory not accessible"},
+ {0x0411, "Logical unit not ready, notify (enable spinup) required"},
+ {0x0412, "Logical unit not ready, offline"},
+ {0x0413, "Logical unit not ready, SA creation in progress"},
+ {0x0414, "Logical unit not ready, space allocation in progress"},
+ {0x0415, "Logical unit not ready, robotics disabled"},
+ {0x0416, "Logical unit not ready, configuration required"},
+ {0x0417, "Logical unit not ready, calibration required"},
+ {0x0418, "Logical unit not ready, a door is open"},
+ {0x0419, "Logical unit not ready, operating in sequential mode"},
+ {0x041A, "Logical unit not ready, start stop unit command in "
+ "progress"},
+ {0x041B, "Logical unit not ready, sanitize in progress"},
+ {0x041C, "Logical unit not ready, additional power use not yet "
+ "granted"},
+ {0x041D, "Logical unit not ready, configuration in progress"},
+
+ {0x0500, "Logical unit does not respond to selection"},
+
+ {0x0600, "No reference position found"},
+
+ {0x0700, "Multiple peripheral devices selected"},
+
+ {0x0800, "Logical unit communication failure"},
+ {0x0801, "Logical unit communication time-out"},
+ {0x0802, "Logical unit communication parity error"},
+ {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"},
+ {0x0804, "Unreachable copy target"},
+
+ {0x0900, "Track following error"},
+ {0x0901, "Tracking servo failure"},
+ {0x0902, "Focus servo failure"},
+ {0x0903, "Spindle servo failure"},
+ {0x0904, "Head select fault"},
+
+ {0x0A00, "Error log overflow"},
+
+ {0x0B00, "Warning"},
+ {0x0B01, "Warning - specified temperature exceeded"},
+ {0x0B02, "Warning - enclosure degraded"},
+ {0x0B03, "Warning - background self-test failed"},
+ {0x0B04, "Warning - background pre-scan detected medium error"},
+ {0x0B05, "Warning - background medium scan detected medium error"},
+ {0x0B06, "Warning - non-volatile cache now volatile"},
+ {0x0B07, "Warning - degraded power to non-volatile cache"},
+ {0x0B08, "Warning - power loss expected"},
+ {0x0B09, "Warning - device statistics notification active"},
+
+ {0x0C00, "Write error"},
+ {0x0C01, "Write error - recovered with auto reallocation"},
+ {0x0C02, "Write error - auto reallocation failed"},
+ {0x0C03, "Write error - recommend reassignment"},
+ {0x0C04, "Compression check miscompare error"},
+ {0x0C05, "Data expansion occurred during compression"},
+ {0x0C06, "Block not compressible"},
+ {0x0C07, "Write error - recovery needed"},
+ {0x0C08, "Write error - recovery failed"},
+ {0x0C09, "Write error - loss of streaming"},
+ {0x0C0A, "Write error - padding blocks added"},
+ {0x0C0B, "Auxiliary memory write error"},
+ {0x0C0C, "Write error - unexpected unsolicited data"},
+ {0x0C0D, "Write error - not enough unsolicited data"},
+ {0x0C0E, "Multiple write errors"},
+ {0x0C0F, "Defects in error window"},
+
+ {0x0D00, "Error detected by third party temporary initiator"},
+ {0x0D01, "Third party device failure"},
+ {0x0D02, "Copy target device not reachable"},
+ {0x0D03, "Incorrect copy target device type"},
+ {0x0D04, "Copy target device data underrun"},
+ {0x0D05, "Copy target device data overrun"},
+
+ {0x0E00, "Invalid information unit"},
+ {0x0E01, "Information unit too short"},
+ {0x0E02, "Information unit too long"},
+ {0x0E03, "Invalid field in command information unit"},
+
+ {0x1000, "Id CRC or ECC error"},
+ {0x1001, "Logical block guard check failed"},
+ {0x1002, "Logical block application tag check failed"},
+ {0x1003, "Logical block reference tag check failed"},
+ {0x1004, "Logical block protection error on recover buffered data"},
+ {0x1005, "Logical block protection method error"},
+
+ {0x1100, "Unrecovered read error"},
+ {0x1101, "Read retries exhausted"},
+ {0x1102, "Error too long to correct"},
+ {0x1103, "Multiple read errors"},
+ {0x1104, "Unrecovered read error - auto reallocate failed"},
+ {0x1105, "L-EC uncorrectable error"},
+ {0x1106, "CIRC unrecovered error"},
+ {0x1107, "Data re-synchronization error"},
+ {0x1108, "Incomplete block read"},
+ {0x1109, "No gap found"},
+ {0x110A, "Miscorrected error"},
+ {0x110B, "Unrecovered read error - recommend reassignment"},
+ {0x110C, "Unrecovered read error - recommend rewrite the data"},
+ {0x110D, "De-compression CRC error"},
+ {0x110E, "Cannot decompress using declared algorithm"},
+ {0x110F, "Error reading UPC/EAN number"},
+ {0x1110, "Error reading ISRC number"},
+ {0x1111, "Read error - loss of streaming"},
+ {0x1112, "Auxiliary memory read error"},
+ {0x1113, "Read error - failed retransmission request"},
+ {0x1114, "Read error - lba marked bad by application client"},
+ {0x1115, "Write after sanitize required"},
+
+ {0x1200, "Address mark not found for id field"},
+
+ {0x1300, "Address mark not found for data field"},
+
+ {0x1400, "Recorded entity not found"},
+ {0x1401, "Record not found"},
+ {0x1402, "Filemark or setmark not found"},
+ {0x1403, "End-of-data not found"},
+ {0x1404, "Block sequence error"},
+ {0x1405, "Record not found - recommend reassignment"},
+ {0x1406, "Record not found - data auto-reallocated"},
+ {0x1407, "Locate operation failure"},
+
+ {0x1500, "Random positioning error"},
+ {0x1501, "Mechanical positioning error"},
+ {0x1502, "Positioning error detected by read of medium"},
+
+ {0x1600, "Data synchronization mark error"},
+ {0x1601, "Data sync error - data rewritten"},
+ {0x1602, "Data sync error - recommend rewrite"},
+ {0x1603, "Data sync error - data auto-reallocated"},
+ {0x1604, "Data sync error - recommend reassignment"},
+
+ {0x1700, "Recovered data with no error correction applied"},
+ {0x1701, "Recovered data with retries"},
+ {0x1702, "Recovered data with positive head offset"},
+ {0x1703, "Recovered data with negative head offset"},
+ {0x1704, "Recovered data with retries and/or circ applied"},
+ {0x1705, "Recovered data using previous sector id"},
+ {0x1706, "Recovered data without ECC - data auto-reallocated"},
+ {0x1707, "Recovered data without ECC - recommend reassignment"},
+ {0x1708, "Recovered data without ECC - recommend rewrite"},
+ {0x1709, "Recovered data without ECC - data rewritten"},
+
+ {0x1800, "Recovered data with error correction applied"},
+ {0x1801, "Recovered data with error corr. & retries applied"},
+ {0x1802, "Recovered data - data auto-reallocated"},
+ {0x1803, "Recovered data with CIRC"},
+ {0x1804, "Recovered data with L-EC"},
+ {0x1805, "Recovered data - recommend reassignment"},
+ {0x1806, "Recovered data - recommend rewrite"},
+ {0x1807, "Recovered data with ECC - data rewritten"},
+ {0x1808, "Recovered data with linking"},
+
+ {0x1900, "Defect list error"},
+ {0x1901, "Defect list not available"},
+ {0x1902, "Defect list error in primary list"},
+ {0x1903, "Defect list error in grown list"},
+
+ {0x1A00, "Parameter list length error"},
+
+ {0x1B00, "Synchronous data transfer error"},
+
+ {0x1C00, "Defect list not found"},
+ {0x1C01, "Primary defect list not found"},
+ {0x1C02, "Grown defect list not found"},
+
+ {0x1D00, "Miscompare during verify operation"},
+ {0x1D01, "Miscompare verify of unmapped LBA"},
+
+ {0x1E00, "Recovered id with ECC correction"},
+
+ {0x1F00, "Partial defect list transfer"},
+
+ {0x2000, "Invalid command operation code"},
+ {0x2001, "Access denied - initiator pending-enrolled"},
+ {0x2002, "Access denied - no access rights"},
+ {0x2003, "Access denied - invalid mgmt id key"},
+ {0x2004, "Illegal command while in write capable state"},
+ {0x2005, "Obsolete"},
+ {0x2006, "Illegal command while in explicit address mode"},
+ {0x2007, "Illegal command while in implicit address mode"},
+ {0x2008, "Access denied - enrollment conflict"},
+ {0x2009, "Access denied - invalid LU identifier"},
+ {0x200A, "Access denied - invalid proxy token"},
+ {0x200B, "Access denied - ACL LUN conflict"},
+ {0x200C, "Illegal command when not in append-only mode"},
+
+ {0x2100, "Logical block address out of range"},
+ {0x2101, "Invalid element address"},
+ {0x2102, "Invalid address for write"},
+ {0x2103, "Invalid write crossing layer jump"},
+
+ {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
+
+ {0x2300, "Invalid token operation, cause not reportable"},
+ {0x2301, "Invalid token operation, unsupported token type"},
+ {0x2302, "Invalid token operation, remote token usage not
supported"},
+ {0x2303, "Invalid token operation, remote rod token creation not "
+ "supported"},
+ {0x2304, "Invalid token operation, token unknown"},
+ {0x2305, "Invalid token operation, token corrupt"},
+ {0x2306, "Invalid token operation, token revoked"},
+ {0x2307, "Invalid token operation, token expired"},
+ {0x2308, "Invalid token operation, token cancelled"},
+ {0x2309, "Invalid token operation, token deleted"},
+ {0x230A, "Invalid token operation, invalid token length"},
+
+ {0x2400, "Invalid field in cdb"},
+ {0x2401, "CDB decryption error"},
+ {0x2402, "Obsolete"},
+ {0x2403, "Obsolete"},
+ {0x2404, "Security audit value frozen"},
+ {0x2405, "Security working key frozen"},
+ {0x2406, "Nonce not unique"},
+ {0x2407, "Nonce timestamp out of range"},
+ {0x2408, "Invalid XCDB"},
+
+ {0x2500, "Logical unit not supported"},
+
+ {0x2600, "Invalid field in parameter list"},
+ {0x2601, "Parameter not supported"},
+ {0x2602, "Parameter value invalid"},
+ {0x2603, "Threshold parameters not supported"},
+ {0x2604, "Invalid release of persistent reservation"},
+ {0x2605, "Data decryption error"},
+ {0x2606, "Too many target descriptors"},
+ {0x2607, "Unsupported target descriptor type code"},
+ {0x2608, "Too many segment descriptors"},
+ {0x2609, "Unsupported segment descriptor type code"},
+ {0x260A, "Unexpected inexact segment"},
+ {0x260B, "Inline data length exceeded"},
+ {0x260C, "Invalid operation for copy source or destination"},
+ {0x260D, "Copy segment granularity violation"},
+ {0x260E, "Invalid parameter while port is enabled"},
+ {0x260F, "Invalid data-out buffer integrity check value"},
+ {0x2610, "Data decryption key fail limit reached"},
+ {0x2611, "Incomplete key-associated data set"},
+ {0x2612, "Vendor specific key reference not found"},
+
+ {0x2700, "Write protected"},
+ {0x2701, "Hardware write protected"},
+ {0x2702, "Logical unit software write protected"},
+ {0x2703, "Associated write protect"},
+ {0x2704, "Persistent write protect"},
+ {0x2705, "Permanent write protect"},
+ {0x2706, "Conditional write protect"},
+ {0x2707, "Space allocation failed write protect"},
+
+ {0x2800, "Not ready to ready change, medium may have changed"},
+ {0x2801, "Import or export element accessed"},
+ {0x2802, "Format-layer may have changed"},
+ {0x2803, "Import/export element accessed, medium changed"},
+
+ {0x2900, "Power on, reset, or bus device reset occurred"},
+ {0x2901, "Power on occurred"},
+ {0x2902, "Scsi bus reset occurred"},
+ {0x2903, "Bus device reset function occurred"},
+ {0x2904, "Device internal reset"},
+ {0x2905, "Transceiver mode changed to single-ended"},
+ {0x2906, "Transceiver mode changed to lvd"},
+ {0x2907, "I_T nexus loss occurred"},
+
+ {0x2A00, "Parameters changed"},
+ {0x2A01, "Mode parameters changed"},
+ {0x2A02, "Log parameters changed"},
+ {0x2A03, "Reservations preempted"},
+ {0x2A04, "Reservations released"},
+ {0x2A05, "Registrations preempted"},
+ {0x2A06, "Asymmetric access state changed"},
+ {0x2A07, "Implicit asymmetric access state transition failed"},
+ {0x2A08, "Priority changed"},
+ {0x2A09, "Capacity data has changed"},
+ {0x2A0A, "Error history I_T nexus cleared"},
+ {0x2A0B, "Error history snapshot released"},
+ {0x2A0C, "Error recovery attributes have changed"},
+ {0x2A0D, "Data encryption capabilities changed"},
+ {0x2A10, "Timestamp changed"},
+ {0x2A11, "Data encryption parameters changed by another i_t nexus"},
+ {0x2A12, "Data encryption parameters changed by vendor specific "
+ "event"},
+ {0x2A13, "Data encryption key instance counter has changed"},
+ {0x2A14, "SA creation capabilities data has changed"},
+ {0x2A15, "Medium removal prevention preempted"},
+
+ {0x2B00, "Copy cannot execute since host cannot disconnect"},
+
+ {0x2C00, "Command sequence error"},
+ {0x2C01, "Too many windows specified"},
+ {0x2C02, "Invalid combination of windows specified"},
+ {0x2C03, "Current program area is not empty"},
+ {0x2C04, "Current program area is empty"},
+ {0x2C05, "Illegal power condition request"},
+ {0x2C06, "Persistent prevent conflict"},
+ {0x2C07, "Previous busy status"},
+ {0x2C08, "Previous task set full status"},
+ {0x2C09, "Previous reservation conflict status"},
+ {0x2C0A, "Partition or collection contains user objects"},
+ {0x2C0B, "Not reserved"},
+ {0x2C0C, "Orwrite generation does not match"},
+
+ {0x2D00, "Overwrite error on update in place"},
+
+ {0x2E00, "Insufficient time for operation"},
+
+ {0x2F00, "Commands cleared by another initiator"},
+ {0x2F01, "Commands cleared by power loss notification"},
+ {0x2F02, "Commands cleared by device server"},
+ {0x2F03, "Some commands cleared by queuing layer event"},
+
+ {0x3000, "Incompatible medium installed"},
+ {0x3001, "Cannot read medium - unknown format"},
+ {0x3002, "Cannot read medium - incompatible format"},
+ {0x3003, "Cleaning cartridge installed"},
+ {0x3004, "Cannot write medium - unknown format"},
+ {0x3005, "Cannot write medium - incompatible format"},
+ {0x3006, "Cannot format medium - incompatible medium"},
+ {0x3007, "Cleaning failure"},
+ {0x3008, "Cannot write - application code mismatch"},
+ {0x3009, "Current session not fixated for append"},
+ {0x300A, "Cleaning request rejected"},
+ {0x300C, "WORM medium - overwrite attempted"},
+ {0x300D, "WORM medium - integrity check"},
+ {0x3010, "Medium not formatted"},
+ {0x3011, "Incompatible volume type"},
+ {0x3012, "Incompatible volume qualifier"},
+ {0x3013, "Cleaning volume expired"},
+
+ {0x3100, "Medium format corrupted"},
+ {0x3101, "Format command failed"},
+ {0x3102, "Zoned formatting failed due to spare linking"},
+ {0x3103, "Sanitize command failed"},
+
+ {0x3200, "No defect spare location available"},
+ {0x3201, "Defect list update failure"},
+
+ {0x3300, "Tape length error"},
+
+ {0x3400, "Enclosure failure"},
+
+ {0x3500, "Enclosure services failure"},
+ {0x3501, "Unsupported enclosure function"},
+ {0x3502, "Enclosure services unavailable"},
+ {0x3503, "Enclosure services transfer failure"},
+ {0x3504, "Enclosure services transfer refused"},
+ {0x3505, "Enclosure services checksum error"},
+
+ {0x3600, "Ribbon, ink, or toner failure"},
+
+ {0x3700, "Rounded parameter"},
+
+ {0x3800, "Event status notification"},
+ {0x3802, "Esn - power management class event"},
+ {0x3804, "Esn - media class event"},
+ {0x3806, "Esn - device busy class event"},
+ {0x3807, "Thin Provisioning soft threshold reached"},
+
+ {0x3900, "Saving parameters not supported"},
+
+ {0x3A00, "Medium not present"},
+ {0x3A01, "Medium not present - tray closed"},
+ {0x3A02, "Medium not present - tray open"},
+ {0x3A03, "Medium not present - loadable"},
+ {0x3A04, "Medium not present - medium auxiliary memory accessible"},
+
+ {0x3B00, "Sequential positioning error"},
+ {0x3B01, "Tape position error at beginning-of-medium"},
+ {0x3B02, "Tape position error at end-of-medium"},
+ {0x3B03, "Tape or electronic vertical forms unit not ready"},
+ {0x3B04, "Slew failure"},
+ {0x3B05, "Paper jam"},
+ {0x3B06, "Failed to sense top-of-form"},
+ {0x3B07, "Failed to sense bottom-of-form"},
+ {0x3B08, "Reposition error"},
+ {0x3B09, "Read past end of medium"},
+ {0x3B0A, "Read past beginning of medium"},
+ {0x3B0B, "Position past end of medium"},
+ {0x3B0C, "Position past beginning of medium"},
+ {0x3B0D, "Medium destination element full"},
+ {0x3B0E, "Medium source element empty"},
+ {0x3B0F, "End of medium reached"},
+ {0x3B11, "Medium magazine not accessible"},
+ {0x3B12, "Medium magazine removed"},
+ {0x3B13, "Medium magazine inserted"},
+ {0x3B14, "Medium magazine locked"},
+ {0x3B15, "Medium magazine unlocked"},
+ {0x3B16, "Mechanical positioning or changer error"},
+ {0x3B17, "Read past end of user object"},
+ {0x3B18, "Element disabled"},
+ {0x3B19, "Element enabled"},
+ {0x3B1A, "Data transfer device removed"},
+ {0x3B1B, "Data transfer device inserted"},
+ {0x3B1C, "Too many logical objects on partition to support "
+ "operation"},
+
+ {0x3D00, "Invalid bits in identify message"},
+
+ {0x3E00, "Logical unit has not self-configured yet"},
+ {0x3E01, "Logical unit failure"},
+ {0x3E02, "Timeout on logical unit"},
+ {0x3E03, "Logical unit failed self-test"},
+ {0x3E04, "Logical unit unable to update self-test log"},
+
+ {0x3F00, "Target operating conditions have changed"},
+ {0x3F01, "Microcode has been changed"},
+ {0x3F02, "Changed operating definition"},
+ {0x3F03, "Inquiry data has changed"},
+ {0x3F04, "Component device attached"},
+ {0x3F05, "Device identifier changed"},
+ {0x3F06, "Redundancy group created or modified"},
+ {0x3F07, "Redundancy group deleted"},
+ {0x3F08, "Spare created or modified"},
+ {0x3F09, "Spare deleted"},
+ {0x3F0A, "Volume set created or modified"},
+ {0x3F0B, "Volume set deleted"},
+ {0x3F0C, "Volume set deassigned"},
+ {0x3F0D, "Volume set reassigned"},
+ {0x3F0E, "Reported luns data has changed"},
+ {0x3F0F, "Echo buffer overwritten"},
+ {0x3F10, "Medium loadable"},
+ {0x3F11, "Medium auxiliary memory accessible"},
+ {0x3F12, "iSCSI IP address added"},
+ {0x3F13, "iSCSI IP address removed"},
+ {0x3F14, "iSCSI IP address changed"},
+ {0x3F15, "Inspect referrals sense descriptors"},
+/*
+ * {0x40NN, "Ram failure"},
+ * {0x40NN, "Diagnostic failure on component nn"},
+ * {0x41NN, "Data path failure"},
+ * {0x42NN, "Power-on or self-test failure"},
+ */
+ {0x4300, "Message error"},
+
+ {0x4400, "Internal target failure"},
+ {0x4401, "Persistent reservation information lost"},
+ {0x4471, "ATA device failed set features"},
+
+ {0x4500, "Select or reselect failure"},
+
+ {0x4600, "Unsuccessful soft reset"},
+
+ {0x4700, "Scsi parity error"},
+ {0x4701, "Data phase CRC error detected"},
+ {0x4702, "Scsi parity error detected during st data phase"},
+ {0x4703, "Information unit iuCRC error detected"},
+ {0x4704, "Asynchronous information protection error detected"},
+ {0x4705, "Protocol service CRC error"},
+ {0x4706, "Phy test function in progress"},
+ {0x477f, "Some commands cleared by iSCSI Protocol event"},
+
+ {0x4800, "Initiator detected error message received"},
+
+ {0x4900, "Invalid message error"},
+
+ {0x4A00, "Command phase error"},
+
+ {0x4B00, "Data phase error"},
+ {0x4B01, "Invalid target port transfer tag received"},
+ {0x4B02, "Too much write data"},
+ {0x4B03, "Ack/nak timeout"},
+ {0x4B04, "Nak received"},
+ {0x4B05, "Data offset error"},
+ {0x4B06, "Initiator response timeout"},
+ {0x4B07, "Connection lost"},
+ {0x4B08, "Data-in buffer overflow - data buffer size"},
+ {0x4B09, "Data-in buffer overflow - data buffer descriptor area"},
+ {0x4B0A, "Data-in buffer error"},
+ {0x4B0B, "Data-out buffer overflow - data buffer size"},
+ {0x4B0C, "Data-out buffer overflow - data buffer descriptor area"},
+ {0x4B0D, "Data-out buffer error"},
+ {0x4B0E, "PCIe fabric error"},
+ {0x4B0F, "PCIe completion timeout"},
+ {0x4B10, "PCIe completer abort"},
+ {0x4B11, "PCIe poisoned tlp received"},
+ {0x4B12, "PCIe eCRC check failed"},
+ {0x4B13, "PCIe unsupported request"},
+ {0x4B14, "PCIe acs violation"},
+ {0x4B15, "PCIe tlp prefix blocked"},
+
+ {0x4C00, "Logical unit failed self-configuration"},
+/*
+ * {0x4DNN, "Tagged overlapped commands (nn = queue tag)"},
+ */
+ {0x4E00, "Overlapped commands attempted"},
+
+ {0x5000, "Write append error"},
+ {0x5001, "Write append position error"},
+ {0x5002, "Position error related to timing"},
+
+ {0x5100, "Erase failure"},
+ {0x5101, "Erase failure - incomplete erase operation detected"},
+
+ {0x5200, "Cartridge fault"},
+
+ {0x5300, "Media load or eject failed"},
+ {0x5301, "Unload tape failure"},
+ {0x5302, "Medium removal prevented"},
+ {0x5303, "Medium removal prevented by data transfer element"},
+ {0x5304, "Medium thread or unthread failure"},
+ {0x5305, "Volume identifier invalid"},
+ {0x5306, "Volume identifier missing"},
+ {0x5307, "Duplicate volume identifier"},
+ {0x5308, "Element status unknown"},
+
+ {0x5400, "Scsi to host system interface failure"},
+
+ {0x5500, "System resource failure"},
+ {0x5501, "System buffer full"},
+ {0x5502, "Insufficient reservation resources"},
+ {0x5503, "Insufficient resources"},
+ {0x5504, "Insufficient registration resources"},
+ {0x5505, "Insufficient access control resources"},
+ {0x5506, "Auxiliary memory out of space"},
+ {0x5507, "Quota error"},
+ {0x5508, "Maximum number of supplemental decryption keys exceeded"},
+ {0x5509, "Medium auxiliary memory not accessible"},
+ {0x550A, "Data currently unavailable"},
+ {0x550B, "Insufficient power for operation"},
+ {0x550C, "Insufficient resources to create rod"},
+ {0x550D, "Insufficient resources to create rod token"},
+
+ {0x5700, "Unable to recover table-of-contents"},
+
+ {0x5800, "Generation does not exist"},
+
+ {0x5900, "Updated block read"},
+
+ {0x5A00, "Operator request or state change input"},
+ {0x5A01, "Operator medium removal request"},
+ {0x5A02, "Operator selected write protect"},
+ {0x5A03, "Operator selected write permit"},
+
+ {0x5B00, "Log exception"},
+ {0x5B01, "Threshold condition met"},
+ {0x5B02, "Log counter at maximum"},
+ {0x5B03, "Log list codes exhausted"},
+
+ {0x5C00, "Rpl status change"},
+ {0x5C01, "Spindles synchronized"},
+ {0x5C02, "Spindles not synchronized"},
+
+ {0x5D00, "Failure prediction threshold exceeded"},
+ {0x5D01, "Media failure prediction threshold exceeded"},
+ {0x5D02, "Logical unit failure prediction threshold exceeded"},
+ {0x5D03, "Spare area exhaustion prediction threshold exceeded"},
+ {0x5D10, "Hardware impending failure general hard drive failure"},
+ {0x5D11, "Hardware impending failure drive error rate too high"},
+ {0x5D12, "Hardware impending failure data error rate too high"},
+ {0x5D13, "Hardware impending failure seek error rate too high"},
+ {0x5D14, "Hardware impending failure too many block reassigns"},
+ {0x5D15, "Hardware impending failure access times too high"},
+ {0x5D16, "Hardware impending failure start unit times too high"},
+ {0x5D17, "Hardware impending failure channel parametrics"},
+ {0x5D18, "Hardware impending failure controller detected"},
+ {0x5D19, "Hardware impending failure throughput performance"},
+ {0x5D1A, "Hardware impending failure seek time performance"},
+ {0x5D1B, "Hardware impending failure spin-up retry count"},
+ {0x5D1C, "Hardware impending failure drive calibration retry
count"},
+ {0x5D20, "Controller impending failure general hard drive failure"},
+ {0x5D21, "Controller impending failure drive error rate too high"},
+ {0x5D22, "Controller impending failure data error rate too high"},
+ {0x5D23, "Controller impending failure seek error rate too high"},
+ {0x5D24, "Controller impending failure too many block reassigns"},
+ {0x5D25, "Controller impending failure access times too high"},
+ {0x5D26, "Controller impending failure start unit times too high"},
+ {0x5D27, "Controller impending failure channel parametrics"},
+ {0x5D28, "Controller impending failure controller detected"},
+ {0x5D29, "Controller impending failure throughput performance"},
+ {0x5D2A, "Controller impending failure seek time performance"},
+ {0x5D2B, "Controller impending failure spin-up retry count"},
+ {0x5D2C, "Controller impending failure drive calibration retry
count"},
+ {0x5D30, "Data channel impending failure general hard drive
failure"},
+ {0x5D31, "Data channel impending failure drive error rate too
high"},
+ {0x5D32, "Data channel impending failure data error rate too high"},
+ {0x5D33, "Data channel impending failure seek error rate too high"},
+ {0x5D34, "Data channel impending failure too many block reassigns"},
+ {0x5D35, "Data channel impending failure access times too high"},
+ {0x5D36, "Data channel impending failure start unit times too
high"},
+ {0x5D37, "Data channel impending failure channel parametrics"},
+ {0x5D38, "Data channel impending failure controller detected"},
+ {0x5D39, "Data channel impending failure throughput performance"},
+ {0x5D3A, "Data channel impending failure seek time performance"},
+ {0x5D3B, "Data channel impending failure spin-up retry count"},
+ {0x5D3C, "Data channel impending failure drive calibration retry "
+ "count"},
+ {0x5D40, "Servo impending failure general hard drive failure"},
+ {0x5D41, "Servo impending failure drive error rate too high"},
+ {0x5D42, "Servo impending failure data error rate too high"},
+ {0x5D43, "Servo impending failure seek error rate too high"},
+ {0x5D44, "Servo impending failure too many block reassigns"},
+ {0x5D45, "Servo impending failure access times too high"},
+ {0x5D46, "Servo impending failure start unit times too high"},
+ {0x5D47, "Servo impending failure channel parametrics"},
+ {0x5D48, "Servo impending failure controller detected"},
+ {0x5D49, "Servo impending failure throughput performance"},
+ {0x5D4A, "Servo impending failure seek time performance"},
+ {0x5D4B, "Servo impending failure spin-up retry count"},
+ {0x5D4C, "Servo impending failure drive calibration retry count"},
+ {0x5D50, "Spindle impending failure general hard drive failure"},
+ {0x5D51, "Spindle impending failure drive error rate too high"},
+ {0x5D52, "Spindle impending failure data error rate too high"},
+ {0x5D53, "Spindle impending failure seek error rate too high"},
+ {0x5D54, "Spindle impending failure too many block reassigns"},
+ {0x5D55, "Spindle impending failure access times too high"},
+ {0x5D56, "Spindle impending failure start unit times too high"},
+ {0x5D57, "Spindle impending failure channel parametrics"},
+ {0x5D58, "Spindle impending failure controller detected"},
+ {0x5D59, "Spindle impending failure throughput performance"},
+ {0x5D5A, "Spindle impending failure seek time performance"},
+ {0x5D5B, "Spindle impending failure spin-up retry count"},
+ {0x5D5C, "Spindle impending failure drive calibration retry count"},
+ {0x5D60, "Firmware impending failure general hard drive failure"},
+ {0x5D61, "Firmware impending failure drive error rate too high"},
+ {0x5D62, "Firmware impending failure data error rate too high"},
+ {0x5D63, "Firmware impending failure seek error rate too high"},
+ {0x5D64, "Firmware impending failure too many block reassigns"},
+ {0x5D65, "Firmware impending failure access times too high"},
+ {0x5D66, "Firmware impending failure start unit times too high"},
+ {0x5D67, "Firmware impending failure channel parametrics"},
+ {0x5D68, "Firmware impending failure controller detected"},
+ {0x5D69, "Firmware impending failure throughput performance"},
+ {0x5D6A, "Firmware impending failure seek time performance"},
+ {0x5D6B, "Firmware impending failure spin-up retry count"},
+ {0x5D6C, "Firmware impending failure drive calibration retry
count"},
+ {0x5DFF, "Failure prediction threshold exceeded (false)"},
+
+ {0x5E00, "Low power condition on"},
+ {0x5E01, "Idle condition activated by timer"},
+ {0x5E02, "Standby condition activated by timer"},
+ {0x5E03, "Idle condition activated by command"},
+ {0x5E04, "Standby condition activated by command"},
+ {0x5E05, "Idle_b condition activated by timer"},
+ {0x5E06, "Idle_b condition activated by command"},
+ {0x5E07, "Idle_c condition activated by timer"},
+ {0x5E08, "Idle_c condition activated by command"},
+ {0x5E09, "Standby_y condition activated by timer"},
+ {0x5E0A, "Standby_y condition activated by command"},
+ {0x5E41, "Power state change to active"},
+ {0x5E42, "Power state change to idle"},
+ {0x5E43, "Power state change to standby"},
+ {0x5E45, "Power state change to sleep"},
+ {0x5E47, "Power state change to device control"},
+
+ {0x6000, "Lamp failure"},
+
+ {0x6100, "Video acquisition error"},
+ {0x6101, "Unable to acquire video"},
+ {0x6102, "Out of focus"},
+
+ {0x6200, "Scan head positioning error"},
+
+ {0x6300, "End of user area encountered on this track"},
+ {0x6301, "Packet does not fit in available space"},
+
+ {0x6400, "Illegal mode for this track"},
+ {0x6401, "Invalid packet size"},
+
+ {0x6500, "Voltage fault"},
+
+ {0x6600, "Automatic document feeder cover up"},
+ {0x6601, "Automatic document feeder lift up"},
+ {0x6602, "Document jam in automatic document feeder"},
+ {0x6603, "Document miss feed automatic in document feeder"},
+
+ {0x6700, "Configuration failure"},
+ {0x6701, "Configuration of incapable logical units failed"},
+ {0x6702, "Add logical unit failed"},
+ {0x6703, "Modification of logical unit failed"},
+ {0x6704, "Exchange of logical unit failed"},
+ {0x6705, "Remove of logical unit failed"},
+ {0x6706, "Attachment of logical unit failed"},
+ {0x6707, "Creation of logical unit failed"},
+ {0x6708, "Assign failure occurred"},
+ {0x6709, "Multiply assigned logical unit"},
+ {0x670A, "Set target port groups command failed"},
+ {0x670B, "ATA device feature not enabled"},
+
+ {0x6800, "Logical unit not configured"},
+ {0x6801, "Subsidiary logical unit not configured"},
+
+ {0x6900, "Data loss on logical unit"},
+ {0x6901, "Multiple logical unit failures"},
+ {0x6902, "Parity/data mismatch"},
+
+ {0x6A00, "Informational, refer to log"},
+
+ {0x6B00, "State change has occurred"},
+ {0x6B01, "Redundancy level got better"},
+ {0x6B02, "Redundancy level got worse"},
+ {0x6C00, "Rebuild failure occurred"},
+
+ {0x6D00, "Recalculate failure occurred"},
+
+ {0x6E00, "Command to logical unit failed"},
+
+ {0x6F00, "Copy protection key exchange failure - authentication "
+ "failure"},
+ {0x6F01, "Copy protection key exchange failure - key not present"},
+ {0x6F02, "Copy protection key exchange failure - key not
established"},
+ {0x6F03, "Read of scrambled sector without authentication"},
+ {0x6F04, "Media region code is mismatched to logical unit region"},
+ {0x6F05, "Drive region must be permanent/region reset count error"},
+ {0x6F06, "Insufficient block count for binding nonce recording"},
+ {0x6F07, "Conflict in binding nonce recording"},
+/*
+ * {0x70NN, "Decompression exception short algorithm id of nn"},
+ */
+ {0x7100, "Decompression exception long algorithm id"},
+
+ {0x7200, "Session fixation error"},
+ {0x7201, "Session fixation error writing lead-in"},
+ {0x7202, "Session fixation error writing lead-out"},
+ {0x7203, "Session fixation error - incomplete track in session"},
+ {0x7204, "Empty or partially written reserved track"},
+ {0x7205, "No more track reservations allowed"},
+ {0x7206, "RMZ extension is not allowed"},
+ {0x7207, "No more test zone extensions are allowed"},
+
+ {0x7300, "Cd control error"},
+ {0x7301, "Power calibration area almost full"},
+ {0x7302, "Power calibration area is full"},
+ {0x7303, "Power calibration area error"},
+ {0x7304, "Program memory area update failure"},
+ {0x7305, "Program memory area is full"},
+ {0x7306, "RMA/PMA is almost full"},
+ {0x7310, "Current power calibration area almost full"},
+ {0x7311, "Current power calibration area is full"},
+ {0x7317, "RDZ is full"},
+
+ {0x7400, "Security error"},
+ {0x7401, "Unable to decrypt data"},
+ {0x7402, "Unencrypted data encountered while decrypting"},
+ {0x7403, "Incorrect data encryption key"},
+ {0x7404, "Cryptographic integrity validation failed"},
+ {0x7405, "Error decrypting data"},
+ {0x7406, "Unknown signature verification key"},
+ {0x7407, "Encryption parameters not useable"},
+ {0x7408, "Digital signature validation failure"},
+ {0x7409, "Encryption mode mismatch on read"},
+ {0x740A, "Encrypted block not raw read enabled"},
+ {0x740B, "Incorrect Encryption parameters"},
+ {0x740C, "Unable to decrypt parameter list"},
+ {0x740D, "Encryption algorithm disabled"},
+ {0x7410, "SA creation parameter value invalid"},
+ {0x7411, "SA creation parameter value rejected"},
+ {0x7412, "Invalid SA usage"},
+ {0x7421, "Data Encryption configuration prevented"},
+ {0x7430, "SA creation parameter not supported"},
+ {0x7440, "Authentication failed"},
+ {0x7461, "External data encryption key manager access error"},
+ {0x7462, "External data encryption key manager error"},
+ {0x7463, "External data encryption key not found"},
+ {0x7464, "External data encryption request not authorized"},
+ {0x746E, "External data encryption control timeout"},
+ {0x746F, "External data encryption control error"},
+ {0x7471, "Logical unit access not authorized"},
+ {0x7479, "Security conflict in translated device"},
+
+ {0, NULL}
+};
+
+struct error_info2 {
+ unsigned char code1, code2_min, code2_max;
+ const char * fmt;
+};
+
+static const struct error_info2 additional2[] = {
+ {0x40, 0x00, 0x7f, "Ram failure (%x)"},
+ {0x40, 0x80, 0xff, "Diagnostic failure on component (%x)"},
+ {0x41, 0x00, 0xff, "Data path failure (%x)"},
+ {0x42, 0x00, 0xff, "Power-on or self-test failure (%x)"},
+ {0x4D, 0x00, 0xff, "Tagged overlapped commands (task tag %x)"},
+ {0x70, 0x00, 0xff, "Decompression exception short algorithm id of
%x"},
+ {0, 0, 0, NULL}
+};
+
/* description of the sense key values */
static const char * const snstext[] = {
"No Sense", /* 0: There is no sense information */
@@ -342,6 +1178,65 @@ scsi_sense_format_string(u8 res_code)
return res_code >= 0x72 ? "[descriptor]" : "";
}
+/*
+ * Get additional sense code string or NULL if not available.
+ * This string may contain a "%x" and should be printed with ascq as
arg.
+ */
+const char *
+scsi_extd_sense_format(u8 asc, u8 ascq) {
+#ifdef CONFIG_SCSI_CONSTANTS
+ int i;
+ unsigned short code = ((asc << 8) | ascq);
+
+ for (i = 0; additional[i].text; i++)
+ if (additional[i].code12 == code)
+ return additional[i].text;
+ for (i = 0; additional2[i].fmt; i++) {
+ if (additional2[i].code1 == asc &&
+ ascq >= additional2[i].code2_min &&
+ ascq <= additional2[i].code2_max)
+ return additional2[i].fmt;
+ }
+#endif
+ return NULL;
+}
+EXPORT_SYMBOL(scsi_extd_sense_format);
+
+const char *
+scsi_show_extd_sense(struct trace_seq *p, u8 asc, u8 ascq)
+{
+ const char *ret = p->buffer + p->len;
+ const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq);
+
+ if (extd_sense_fmt) {
+ if (strstr(extd_sense_fmt, "%x")) {
+ char sense_buf[50];
+
+ sprintf(sense_buf, extd_sense_fmt, ascq);
+ trace_seq_printf(p, " Add. Sense (%s)", sense_buf);
+ } else
+ trace_seq_printf(p, " Add. Sense (%s)", extd_sense_fmt);
+ } else
+ trace_seq_printf(p, " %sASC=0x%x %sASCQ=0x%x",
+ asc >= 0x80 ? "<<vendor>> " : "", asc,
+ asc < 0 && ascq >= 0x80 ? "<<vendor>> " : "",
+ ascq);
+
+ trace_seq_putc(p, 0);
+ return ret;
+}
+
+/*
+ * Print normalized SCSI sense header with a prefix.
+ */
+void
+scsi_print_sense_hdr(struct scsi_device *sdev, const char *name,
+ struct scsi_sense_hdr *sshdr)
+{
+ trace_scsi_print_sense(sdev, name, sshdr, NULL, 0, 0);
+}
+EXPORT_SYMBOL(scsi_print_sense_hdr);
+
static const char *
scsi_dump_sense_buffer(struct trace_seq *p, const unsigned char
*buf, int len)
{
@@ -419,6 +1314,31 @@ out:
return ret;
}
+/* Normalize and print sense buffer with name prefix */
+void __scsi_print_sense(struct scsi_device *sdev, const char *name,
+ const unsigned char *sense_buffer, int sense_len)
+{
+ struct scsi_sense_hdr sshdr;
+ int raw;
+
+ raw = !scsi_normalize_sense(sense_buffer, sense_len, &sshdr);
+
+ trace_scsi_print_sense(sdev, name, &sshdr, sense_buffer, sense_len,
+ raw);
+}
+EXPORT_SYMBOL(__scsi_print_sense);
+
+/* Normalize and print sense buffer in SCSI command */
+void scsi_print_sense(struct scsi_cmnd *cmd)
+{
+ const char *devname = cmd->request->rq_disk ?
+ cmd->request->rq_disk->disk_name : "scsi";
+
+ __scsi_print_sense(cmd->device, devname, cmd->sense_buffer,
+ SCSI_SENSE_BUFFERSIZE);
+}
+EXPORT_SYMBOL(scsi_print_sense);
+
void scsi_show_result(struct scsi_device *sdev, const char *name,
int result)
{
trace_scsi_show_result(sdev, name, result);
diff --git a/include/scsi/scsi_dbg.h b/include/scsi/scsi_dbg.h
index 68a29e4..67e6a89 100644
--- a/include/scsi/scsi_dbg.h
+++ b/include/scsi/scsi_dbg.h
@@ -8,8 +8,6 @@ struct scsi_device;
extern void scsi_print_command(struct scsi_cmnd *);
extern void __scsi_print_command(struct scsi_device *, const char *,
unsigned char *, int);
-extern void scsi_show_extd_sense(struct scsi_device *, const char *,
- unsigned char, unsigned char);
extern void scsi_print_sense_hdr(struct scsi_device *, const char *,
struct scsi_sense_hdr *);
extern void scsi_print_sense(struct scsi_cmnd *);
diff --git a/include/trace/events/scsi.h b/include/trace/events/scsi.h
index 572aa65..6d3543f 100644
--- a/include/trace/events/scsi.h
+++ b/include/trace/events/scsi.h
@@ -400,6 +400,9 @@ const char *scsi_trace_decode_sense_extras(struct
trace_seq*, u8, u8,
#define __decode_extras(sense_key, res_code, buf, len, raw) \
scsi_trace_decode_sense_extras(p, sense_key, res_code, buf, len,
raw)
+const char *scsi_show_extd_sense(struct trace_seq*, u8, u8);
+#define __extd_sense(asc, ascq) scsi_show_extd_sense(p, asc, ascq)
+
TRACE_EVENT(scsi_print_sense,
TP_PROTO(struct scsi_device *sdev, const char *devname,
@@ -433,15 +436,18 @@ TRACE_EVENT(scsi_print_sense,
__entry->res_code = sshdr->response_code;
memcpy(__get_dynamic_array(sense_buffer), sense_buffer,
sense_len);
+ __entry->asc = sshdr->asc;
+ __entry->ascq = sshdr->ascq;
__entry->sense_len = sense_len;
__entry->raw = raw;
),
- TP_printk("host_no=%u channel=%u id=%u lun=%u [%s] %s",
+ TP_printk("host_no=%u channel=%u id=%u lun=%u [%s] %s %s",
__entry->host_no, __entry->channel, __entry->id,
__entry->lun,
__get_str(devname), __decode_extras(__entry->sense_key,
__entry->res_code, __get_dynamic_array(sense_buffer),
- __entry->sense_len, __entry->raw))
+ __entry->sense_len, __entry->raw),
+ __extd_sense(__entry->asc, __entry->ascq))
);
#endif /* _TRACE_SCSI_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
