From: Jayamohan Kallickal <jayamohan.kallickal@xxxxxxxxxx>
During port async event driver should check if there is any boot target
configured on the adapter. Update sysfs enteries with the boot target
parameters.
Signed-off-by: Minh Tran <minhduc.tran@xxxxxxxxxx>
Signed-off-by: John Soni Jose <sony.john-n@xxxxxxxxxx>
Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@xxxxxxxxxx>
---
drivers/scsi/be2iscsi/be_cmds.c | 38 ++++++++++++++++++++++++++++++++++++--
drivers/scsi/be2iscsi/be_cmds.h | 8 ++++++++
drivers/scsi/be2iscsi/be_main.c | 17 +++++++++++++++++
drivers/scsi/be2iscsi/be_main.h | 1 +
4 files changed, 62 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index ea4477f..80d97f3 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -275,6 +275,19 @@ bool is_link_state_evt(u32 trailer)
ASYNC_EVENT_CODE_LINK_STATE);
}
+static bool is_iscsi_evt(u32 trailer)
+{
+ return ((trailer >> ASYNC_TRAILER_EVENT_CODE_SHIFT) &
+ ASYNC_TRAILER_EVENT_CODE_MASK) ==
+ ASYNC_EVENT_CODE_ISCSI;
+}
+
+static int iscsi_evt_type(u32 trailer)
+{
+ return (trailer >> ASYNC_TRAILER_EVENT_TYPE_SHIFT) &
+ ASYNC_TRAILER_EVENT_TYPE_MASK;
+}
+
static inline bool be_mcc_compl_is_new(struct be_mcc_compl *compl)
{
if (compl->flags != 0) {
@@ -438,7 +451,7 @@ void beiscsi_async_link_state_process(struct beiscsi_hba *phba,
} else if ((evt->port_link_status & ASYNC_EVENT_LINK_UP) ||
((evt->port_link_status & ASYNC_EVENT_LOGICAL) &&
(evt->port_fault == BEISCSI_PHY_LINK_FAULT_NONE))) {
- phba->state = BE_ADAPTER_LINK_UP;
+ phba->state = BE_ADAPTER_LINK_UP | BE_ADAPTER_CHECK_BOOT;
beiscsi_log(phba, KERN_ERR,
BEISCSI_LOG_CONFIG | BEISCSI_LOG_INIT,
@@ -461,7 +474,28 @@ int beiscsi_process_mcc(struct beiscsi_hba *phba)
/* Interpret compl as a async link evt */
beiscsi_async_link_state_process(phba,
(struct be_async_event_link_state *) compl);
- else
+ else if (is_iscsi_evt(compl->flags)) {
+ switch (iscsi_evt_type(compl->flags)) {
+ case ASYNC_EVENT_NEW_ISCSI_TGT_DISC:
+ case ASYNC_EVENT_NEW_ISCSI_CONN:
+ case ASYNC_EVENT_NEW_TCP_CONN:
+ phba->state |= BE_ADAPTER_CHECK_BOOT;
+ beiscsi_log(phba, KERN_ERR,
+ BEISCSI_LOG_CONFIG |
+ BEISCSI_LOG_MBOX,
+ "BC_%d : Async iscsi Event,"
+ " flags handled = 0x%08x\n",
+ compl->flags);
+ break;
+ default:
+ beiscsi_log(phba, KERN_ERR,
+ BEISCSI_LOG_CONFIG |
+ BEISCSI_LOG_MBOX,
+ "BC_%d : Unsupported Async"
+ " Event, flags = 0x%08x\n",
+ compl->flags);
+ }
+ } else
beiscsi_log(phba, KERN_ERR,
BEISCSI_LOG_CONFIG |
BEISCSI_LOG_MBOX,
diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
index ccda0b6..9889743 100644
--- a/drivers/scsi/be2iscsi/be_cmds.h
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -118,6 +118,14 @@ struct be_mcc_compl {
#define ASYNC_TRAILER_EVENT_CODE_SHIFT 8 /* bits 8 - 15 */
#define ASYNC_TRAILER_EVENT_CODE_MASK 0xFF
#define ASYNC_EVENT_CODE_LINK_STATE 0x1
+#define ASYNC_EVENT_CODE_ISCSI 0x4
+
+#define ASYNC_TRAILER_EVENT_TYPE_SHIFT 16 /* bits 16 - 23 */
+#define ASYNC_TRAILER_EVENT_TYPE_MASK 0xF
+#define ASYNC_EVENT_NEW_ISCSI_TGT_DISC 0x4
+#define ASYNC_EVENT_NEW_ISCSI_CONN 0x5
+#define ASYNC_EVENT_NEW_TCP_CONN 0x7
+
struct be_async_event_trailer {
u32 code;
};
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index d6465ed..8f9f625 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -4379,6 +4379,10 @@ static int beiscsi_setup_boot_info(struct beiscsi_hba *phba)
{
struct iscsi_boot_kobj *boot_kobj;
+ /* it has been created previously */
+ if (phba->boot_kset)
+ return 0;
+
/* get boot info using mgmt cmd */
if (beiscsi_get_boot_info(phba))
/* Try to see if we can carry on without this */
@@ -5337,6 +5341,14 @@ static void be_eqd_update(struct beiscsi_hba *phba)
}
}
+static void be_check_boot_session(struct beiscsi_hba *phba)
+{
+ if (beiscsi_setup_boot_info(phba))
+ beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+ "BM_%d : Could not set up "
+ "iSCSI boot info on async event.\n");
+}
+
/*
* beiscsi_hw_health_check()- Check adapter health
* @work: work item to check HW health
@@ -5352,6 +5364,11 @@ beiscsi_hw_health_check(struct work_struct *work)
be_eqd_update(phba);
+ if (phba->state & BE_ADAPTER_CHECK_BOOT) {
+ phba->state &= ~BE_ADAPTER_CHECK_BOOT;
+ be_check_boot_session(phba);
+ }
+
beiscsi_ue_detect(phba);
schedule_delayed_work(&phba->beiscsi_hw_check_task,
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index 0ca9d2d..1e3428a 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -104,6 +104,7 @@
#define BE_ADAPTER_LINK_DOWN 0x002
#define BE_ADAPTER_PCI_ERR 0x004
#define BE_ADAPTER_STATE_SHUTDOWN 0x008
+#define BE_ADAPTER_CHECK_BOOT 0x010
#define BEISCSI_CLEAN_UNLOAD 0x01
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
