Re: [PATCH v1.3 1/18] arcmsr: Revised interrupt service routine relate function to fix bug

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/01/2014 10:28 AM, Ching Huang wrote:
> This patch rewrite the interrupt service routine relate function to fix command timeout when controller has very 
> heavy loading.
>
> Signed-off-by: Ching<ching2048@xxxxxxxxxxxx>
> ---
>
> diff -uprN a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
> --- a/drivers/scsi/arcmsr/arcmsr.h	2014-07-30 10:33:02.000000000 +0800
> +++ b/drivers/scsi/arcmsr/arcmsr.h	2014-04-28 16:02:46.000000000 +0800
> @@ -51,7 +51,7 @@ struct device_attribute;
>  #else
>  	#define ARCMSR_MAX_FREECCB_NUM	320
>  #endif
> -#define ARCMSR_DRIVER_VERSION		     "Driver Version 1.20.00.15 2010/08/05"
> +#define ARCMSR_DRIVER_VERSION		"v1.30.00.04-20140428"
>  #define ARCMSR_SCSI_INITIATOR_ID						255
>  #define ARCMSR_MAX_XFER_SECTORS							512
>  #define ARCMSR_MAX_XFER_SECTORS_B						4096
> diff -uprN a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
> --- a/drivers/scsi/arcmsr/arcmsr_hba.c	2014-07-30 10:32:28.000000000 +0800
> +++ b/drivers/scsi/arcmsr/arcmsr_hba.c	2014-08-01 11:02:44.000000000 +0800
> @@ -1441,14 +1441,15 @@ static void arcmsr_hba_doorbell_isr(stru
>  	uint32_t outbound_doorbell;
>  	struct MessageUnit_A __iomem *reg = acb->pmuA;
>  	outbound_doorbell = readl(&reg->outbound_doorbell);
> -	writel(outbound_doorbell, &reg->outbound_doorbell);
> -	if (outbound_doorbell & ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK) {
> -		arcmsr_iop2drv_data_wrote_handle(acb);
> -	}
> -
> -	if (outbound_doorbell & ARCMSR_OUTBOUND_IOP331_DATA_READ_OK) {
> -		arcmsr_iop2drv_data_read_handle(acb);
> -	}
> +	do {
> +		writel(outbound_doorbell, &reg->outbound_doorbell);
> +		if (outbound_doorbell & ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK)
> +			arcmsr_iop2drv_data_wrote_handle(acb);
> +		if (outbound_doorbell & ARCMSR_OUTBOUND_IOP331_DATA_READ_OK)
> +			arcmsr_iop2drv_data_read_handle(acb);
> +		outbound_doorbell = readl(&reg->outbound_doorbell);
> +	} while (outbound_doorbell & (ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK
> +		| ARCMSR_OUTBOUND_IOP331_DATA_READ_OK));
>  }
>  static void arcmsr_hbc_doorbell_isr(struct AdapterControlBlock *pACB)
>  {
> @@ -1462,17 +1463,19 @@ static void arcmsr_hbc_doorbell_isr(stru
>  	*******************************************************************
>  	*/
>  	outbound_doorbell = readl(&reg->outbound_doorbell);
> -	writel(outbound_doorbell, &reg->outbound_doorbell_clear);/*clear interrupt*/
> -	if (outbound_doorbell & ARCMSR_HBCMU_IOP2DRV_DATA_WRITE_OK) {
> -		arcmsr_iop2drv_data_wrote_handle(pACB);
> -	}
> -	if (outbound_doorbell & ARCMSR_HBCMU_IOP2DRV_DATA_READ_OK) {
> -		arcmsr_iop2drv_data_read_handle(pACB);
> -	}
> -	if (outbound_doorbell & ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE) {
> -		arcmsr_hbc_message_isr(pACB);    /* messenger of "driver to iop commands" */
> -	}
> -	return;
> +	do {
> +		writel(outbound_doorbell, &reg->outbound_doorbell_clear);
> +		readl(&reg->outbound_doorbell_clear);
> +		if (outbound_doorbell & ARCMSR_HBCMU_IOP2DRV_DATA_WRITE_OK)
> +			arcmsr_iop2drv_data_wrote_handle(pACB);
> +		if (outbound_doorbell & ARCMSR_HBCMU_IOP2DRV_DATA_READ_OK)
> +			arcmsr_iop2drv_data_read_handle(pACB);
> +		if (outbound_doorbell & ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE)
> +			arcmsr_hbc_message_isr(pACB);
> +		outbound_doorbell = readl(&reg->outbound_doorbell);
> +	} while (outbound_doorbell & (ARCMSR_HBCMU_IOP2DRV_DATA_WRITE_OK
> +		| ARCMSR_HBCMU_IOP2DRV_DATA_READ_OK
> +		| ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE));
>  }
>  static void arcmsr_hba_postqueue_isr(struct AdapterControlBlock *acb)
>  {
> @@ -1521,21 +1524,22 @@ static void arcmsr_hbc_postqueue_isr(str
>  	/* areca cdb command done */
>  	/* Use correct offset and size for syncing */
>  
> -	while (readl(&phbcmu->host_int_status) &
> -	ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR){
> -	/* check if command done with no error*/
> -	flag_ccb = readl(&phbcmu->outbound_queueport_low);
> -	ccb_cdb_phy = (flag_ccb & 0xFFFFFFF0);/*frame must be 32 bytes aligned*/
> -	arcmsr_cdb = (struct ARCMSR_CDB *)(acb->vir2phy_offset + ccb_cdb_phy);
> -	ccb = container_of(arcmsr_cdb, struct CommandControlBlock, arcmsr_cdb);
> -	error = (flag_ccb & ARCMSR_CCBREPLY_FLAG_ERROR_MODE1) ? true : false;
> -	/* check if command done with no error */
> -	arcmsr_drain_donequeue(acb, ccb, error);
> -	if (throttling == ARCMSR_HBC_ISR_THROTTLING_LEVEL) {
> -		writel(ARCMSR_HBCMU_DRV2IOP_POSTQUEUE_THROTTLING, &phbcmu->inbound_doorbell);
> -		break;
> -	}
> -	throttling++;
> +	while ((flag_ccb = readl(&phbcmu->outbound_queueport_low)) != 0xFFFFFFFF) {
> +		ccb_cdb_phy = (flag_ccb & 0xFFFFFFF0);
> +		arcmsr_cdb = (struct ARCMSR_CDB *)(acb->vir2phy_offset
> +			+ ccb_cdb_phy);
> +		ccb = container_of(arcmsr_cdb, struct CommandControlBlock,
> +			arcmsr_cdb);
> +		error = (flag_ccb & ARCMSR_CCBREPLY_FLAG_ERROR_MODE1)
> +			? true : false;
> +		/* check if command done with no error */
> +		arcmsr_drain_donequeue(acb, ccb, error);
> +		throttling++;
> +		if (throttling == ARCMSR_HBC_ISR_THROTTLING_LEVEL) {
> +			writel(ARCMSR_HBCMU_DRV2IOP_POSTQUEUE_THROTTLING,
> +				&phbcmu->inbound_doorbell);
> +			throttling = 0;
> +		}
>  	}
>  }
>  /*
> @@ -1584,21 +1588,22 @@ static int arcmsr_handle_hba_isr(struct 
>  	struct MessageUnit_A __iomem *reg = acb->pmuA;
>  	outbound_intstatus = readl(&reg->outbound_intstatus) &
>  		acb->outbound_int_enable;
> -	if (!(outbound_intstatus & ARCMSR_MU_OUTBOUND_HANDLE_INT))	{
> -		return 1;
> -	}
> -	writel(outbound_intstatus, &reg->outbound_intstatus);
> -	if (outbound_intstatus & ARCMSR_MU_OUTBOUND_DOORBELL_INT)	{
> -		arcmsr_hba_doorbell_isr(acb);
> -	}
> -	if (outbound_intstatus & ARCMSR_MU_OUTBOUND_POSTQUEUE_INT) {
> -		arcmsr_hba_postqueue_isr(acb);
> -	}
> -	if(outbound_intstatus & ARCMSR_MU_OUTBOUND_MESSAGE0_INT) 	{
> -		/* messenger of "driver to iop commands" */
> -		arcmsr_hba_message_isr(acb);
> -	}
> -	return 0;
> +	if (!(outbound_intstatus & ARCMSR_MU_OUTBOUND_HANDLE_INT))
> +		return IRQ_NONE;
> +	do {
> +		writel(outbound_intstatus, &reg->outbound_intstatus);
> +		if (outbound_intstatus & ARCMSR_MU_OUTBOUND_DOORBELL_INT)
> +			arcmsr_hba_doorbell_isr(acb);
> +		if (outbound_intstatus & ARCMSR_MU_OUTBOUND_POSTQUEUE_INT)
> +			arcmsr_hba_postqueue_isr(acb);
> +		if (outbound_intstatus & ARCMSR_MU_OUTBOUND_MESSAGE0_INT)
> +			arcmsr_hba_message_isr(acb);
> +		outbound_intstatus = readl(&reg->outbound_intstatus) &
> +			acb->outbound_int_enable;
> +	} while (outbound_intstatus & (ARCMSR_MU_OUTBOUND_DOORBELL_INT
> +		| ARCMSR_MU_OUTBOUND_POSTQUEUE_INT
> +		| ARCMSR_MU_OUTBOUND_MESSAGE0_INT));
> +	return IRQ_HANDLED;
>  }
>  
>  static int arcmsr_handle_hbb_isr(struct AdapterControlBlock *acb)
> @@ -1608,27 +1613,25 @@ static int arcmsr_handle_hbb_isr(struct 
>  	outbound_doorbell = readl(reg->iop2drv_doorbell) &
>  				acb->outbound_int_enable;
>  	if (!outbound_doorbell)
> -		return 1;
> -
> -	writel(~outbound_doorbell, reg->iop2drv_doorbell);
> -	/*in case the last action of doorbell interrupt clearance is cached,
> -	this action can push HW to write down the clear bit*/
> -	readl(reg->iop2drv_doorbell);
> -	writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT, reg->drv2iop_doorbell);
> -	if (outbound_doorbell & ARCMSR_IOP2DRV_DATA_WRITE_OK) {
> -		arcmsr_iop2drv_data_wrote_handle(acb);
> -	}
> -	if (outbound_doorbell & ARCMSR_IOP2DRV_DATA_READ_OK) {
> -		arcmsr_iop2drv_data_read_handle(acb);
> -	}
> -	if (outbound_doorbell & ARCMSR_IOP2DRV_CDB_DONE) {
> -		arcmsr_hbb_postqueue_isr(acb);
> -	}
> -	if(outbound_doorbell & ARCMSR_IOP2DRV_MESSAGE_CMD_DONE) {
> -		/* messenger of "driver to iop commands" */
> -		arcmsr_hbb_message_isr(acb);
> -	}
> -	return 0;
> +		return IRQ_NONE;
> +	do {
> +		writel(~outbound_doorbell, reg->iop2drv_doorbell);
> +		writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT, reg->drv2iop_doorbell);
> +		if (outbound_doorbell & ARCMSR_IOP2DRV_DATA_WRITE_OK)
> +			arcmsr_iop2drv_data_wrote_handle(acb);
> +		if (outbound_doorbell & ARCMSR_IOP2DRV_DATA_READ_OK)
> +			arcmsr_iop2drv_data_read_handle(acb);
> +		if (outbound_doorbell & ARCMSR_IOP2DRV_CDB_DONE)
> +			arcmsr_hbb_postqueue_isr(acb);
> +		if (outbound_doorbell & ARCMSR_IOP2DRV_MESSAGE_CMD_DONE)
> +			arcmsr_hbb_message_isr(acb);
> +		outbound_doorbell = readl(reg->iop2drv_doorbell) &
> +			acb->outbound_int_enable;
> +	} while (outbound_doorbell & (ARCMSR_IOP2DRV_DATA_WRITE_OK
> +		| ARCMSR_IOP2DRV_DATA_READ_OK
> +		| ARCMSR_IOP2DRV_CDB_DONE
> +		| ARCMSR_IOP2DRV_MESSAGE_CMD_DONE));
> +	return IRQ_HANDLED;
>  }
>  
>  static int arcmsr_handle_hbc_isr(struct AdapterControlBlock *pACB)
> @@ -1640,44 +1643,37 @@ static int arcmsr_handle_hbc_isr(struct 
>  	**   check outbound intstatus
>  	*********************************************
>  	*/
> -	host_interrupt_status = readl(&phbcmu->host_int_status);
> -	if (!host_interrupt_status) {
> -		/*it must be share irq*/
> -		return 1;
> -	}
> -	/* MU ioctl transfer doorbell interrupts*/
> -	if (host_interrupt_status & ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR) {
> -		arcmsr_hbc_doorbell_isr(pACB);   /* messenger of "ioctl message read write" */
> -	}
> -	/* MU post queue interrupts*/
> -	if (host_interrupt_status & ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR) {
> -		arcmsr_hbc_postqueue_isr(pACB);  /* messenger of "scsi commands" */
> -	}
> -	return 0;
> +	host_interrupt_status = readl(&phbcmu->host_int_status) &
> +		(ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR |
> +		ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR);
> +	if (!host_interrupt_status)
> +		return IRQ_NONE;
> +	do {
> +		if (host_interrupt_status & ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR)
> +			arcmsr_hbc_doorbell_isr(pACB);
> +		/* MU post queue interrupts*/
> +		if (host_interrupt_status & ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR)
> +			arcmsr_hbc_postqueue_isr(pACB);
> +		host_interrupt_status = readl(&phbcmu->host_int_status);
> +	} while (host_interrupt_status & (ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR |
> +		ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR));
> +	return IRQ_HANDLED;
>  }
>  static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb)
>  {
>  	switch (acb->adapter_type) {

I think that you probably can assign the proper isr function in request_irq in arcmsr_probe
and get rid of this switch.

The changes in this patch are very close related to the hw interface which in not documented,
the overall logic seems to be correct.

Reviewed-by: Tomas Henzl <thenzl@xxxxxxxxxx>

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux