Since a lot of functionality from SPC-4 is supported by this
driver (e.g. LBP and PI) then bump the default INQUIRY version
from SPC-3 to SPC-4. Also update the INQUIRY version
descriptors.
Signed-off-by: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
---
drivers/scsi/scsi_debug.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 693f2fa..1c475e9 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -123,7 +123,7 @@ static const char *scsi_debug_version_date = "20140706";
#define DEF_PHYSBLK_EXP 0
#define DEF_PTYPE 0
#define DEF_REMOVABLE false
-#define DEF_SCSI_LEVEL 5 /* INQUIRY, byte2 [5->SPC-3] */
+#define DEF_SCSI_LEVEL 6 /* INQUIRY, byte2 [6->SPC-4] */
#define DEF_SECTOR_SIZE 512
#define DEF_TAGGED_QUEUING 0 /* 0 | MSG_SIMPLE_TAG | MSG_ORDERED_TAG */
#define DEF_UNMAP_ALIGNMENT 0
@@ -1056,15 +1056,15 @@ static int resp_inquiry(struct scsi_cmnd *scp, int target,
memcpy(&arr[16], inq_product_id, 16);
memcpy(&arr[32], inq_product_rev, 4);
/* version descriptors (2 bytes each) follow */
- arr[58] = 0x0; arr[59] = 0x77; /* SAM-3 ANSI */
- arr[60] = 0x3; arr[61] = 0x14; /* SPC-3 ANSI */
+ arr[58] = 0x0; arr[59] = 0xa2; /* SAM-5 rev 4 */
+ arr[60] = 0x4; arr[61] = 0x68; /* SPC-4 rev 37 */
n = 62;
if (scsi_debug_ptype == 0) {
- arr[n++] = 0x3; arr[n++] = 0x3d; /* SBC-2 ANSI */
+ arr[n++] = 0x4; arr[n++] = 0xc5; /* SBC-4 rev 36 */
} else if (scsi_debug_ptype == 1) {
- arr[n++] = 0x3; arr[n++] = 0x60; /* SSC-2 no version */
+ arr[n++] = 0x5; arr[n++] = 0x25; /* SSC-4 rev 3 */
}
- arr[n++] = 0xc; arr[n++] = 0xf; /* SAS-1.1 rev 10 */
+ arr[n++] = 0x20; arr[n++] = 0xe6; /* SPL-3 rev 7 */
ret = fill_from_dev_buffer(scp, arr,
min(alloc_len, SDEBUG_LONG_INQ_SZ));
kfree(arr);
@@ -3205,7 +3205,7 @@ MODULE_PARM_DESC(opts, "1->noise, 2->medium_err, 4->timeout, 8->recovered_err...
MODULE_PARM_DESC(physblk_exp, "physical block exponent (def=0)");
MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])");
MODULE_PARM_DESC(removable, "claim to have removable media (def=0)");
-MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=5[SPC-3])");
+MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=6[SPC-4])");
MODULE_PARM_DESC(sector_size, "logical block size in bytes (def=512)");
MODULE_PARM_DESC(unmap_alignment, "lowest aligned thin provisioning lba (def=0)");
MODULE_PARM_DESC(unmap_granularity, "thin provisioning granularity in blocks (def=1)");
--
1.9.1
