On 07/29/2014 03:13 AM, Luis R. Rodriguez wrote:
On Mon, Jul 28, 2014 at 5:35 PM, Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
On Mon, Jul 28, 2014 at 05:26:34PM -0700, Luis R. Rodriguez wrote:
On Mon, Jul 28, 2014 at 4:46 PM, Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
On Mon, Jul 28, 2014 at 12:48:32PM -0700, Luis R. Rodriguez wrote:
On Mon, Jul 28, 2014 at 12:04 PM, Luis R. Rodriguez
<mcgrof@xxxxxxxxxxxxxxxx> wrote:
On Mon, Jul 28, 2014 at 11:55 AM, Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
So, what drivers are having problems in their init sequence, and why
aren't they using async firmware loading?
Fixing drivers is one thing, fixing drivers *now* because *now*
drivers are failing due to a regression is another thing and that's
what we have now so lets just be clear on that. The 30 second rule is
a major driver requirement change and it should not be taken slightly,
all of a sudden this is a new requirement but you won't know that
unless you're reading these threads or hit an issue. That's an issue
in itself.
That "regression" is something that userspace has decided to do, not
anything the kernel changed,
Actually commit 786235ee seems to have been the one that caused this
issue, systemd would just send the SIGKILL and that change forced a
bail on probe then hence Canonical's work around to modify
kthread_create() to not leave upon SIGKILL:
http://thread.gmane.org/gmane.linux.ubuntu.devel.kernel.general/39123
so perhaps you should just patch your
modprobe and be done with it until you can fix up those drivers?
To ignore SIGKILL ?
Sorry, I thought this was a userspace change that caused this.
As it's a kernel change, well, maybe that patch should be reverted...
That's certainly viable. Oleg?
If its reverted we won't know which drivers are hitting over the new
30 second limit requirement imposed by userspace, which the culprit
commit forces failure on probe now. This series at least would allow
us to annotate which drivers are brake the 30 second init limit, and
enable a work around alternative if we wish to not revert the commit.
This series essentially should be considered an alternative solution
to what was proposed initially by Joseph Salisbury, it may not be
perfect but its a proposal. I welcome others.
And putting a horrid hack in the driver core, just because of some
really bad drivers, is not ok, that's an interface _I_ will have to
support for the next few decades.
I understand, hence review.
And it's going to take you a while to get something like this ever
merged in anyway, odds are you can fix up the driver faster...
That requires quite a bit of changes and commitment and again, there
are quite a bit of drivers that we can run into in the community,
we've just spotted 2 so far here for now.
The cxgb4: driver is an example where although I did propose patches
to use asynch firmware loading the entire registration of the
netdevice would need to be changed as well in order to get this right.
In short we have to scramble now to first identify drivers that have
long init sequences and then fix. There's an assumption that we can
easily fix drivers, this can take time. This series, although does
take advantage of a kernel interface for other uses, lets us identify
these drivers on the kernel ring buffer, so we can go and address
fixing them with time.
Another thing that came up during asynch firmware review / integration
on cxgb4 was that it would not be the only thing that would need to be
fixed, the driver also has a ton of ports and at least as per my
review the proper fix would be to use platform regiister stuff. It is
a major rewrite of the driver but an example of a driver that needs
quite a bit of work to meet this new 30 second driver requirement.
It shouldn't be using any platform driver stuff, it's a pci device, not
a platform device.
The general PCI stuff is already used, the reason for suggesting the
platform_device_register_simple() stuff is it has tons of ports and
each port will register in turn a new struct netdevice, essentially
one device can end up having tons of different network devices, the
platform stuff would be to allow handling each netdevice candidate
separately as part of the internal driver architecture, right now its
some scary loop thing that in my eyes can be very error prone.
drivers/net/ethernet/8390/ne.c. This discussion:
No, don't use platform devices as a "catch-all" for when you don't want
to write your own bus code. This looks like a device-specific bus,
great, write the code to do that, it can be done in about 200 lines,
with comments and whitespace.
Only use platform devices for, wait for it, platform devices. And even
then, reconsider and use something else if at all possible.
OK thanks I had asked for advice for this a while back on that old
thread as I wasn't sure if that was the best.
Why not just put the initial "register the device" in a single-shot
workqueue or thread or something like that so that modprobe returns
instantly back with a success and all is fine?
That surely is possible but why not a general solution for such kludges?
Because the driver should be fixed. How hard would it be to do what I
just suggested here, 20 lines added at most?
I appreciate the feedback, but don't look at me, I'd happy to go nutty
on ripping things apart from hairy drivers, however Chelsie folks
expressed concerns over major rework on the driver... so even if we
did have something I expect things to take a while to bake / gain
confidence from others.
This also just addresses this *one* Ethernet driver, there was that
SCSI driver that created the original report -- Canonical merged
Joseph's fix as a work around, there is no general solution for this
yet, and again with that work around you won't find which drivers run
into this issue. There may be others found later so this is why I
resorted to the deferred workqueue as a solution for now and to enable
us to annotate which drivers need fixing as I expect getting the fix
done / everyone happy can take time.
Well ... from my POV there are two issues here:
The one is that systemd essentially nailed its internal worker
timeout to 30 seconds. And there is no way of modifying that short
of recompiling. Which should be fixed, so that at least one can
modify this timeout.
The other one is that systemd killing a worker by sending SIGKILL,
which will kill modprobe terminally.
Which definitely needs to be fixed.
But if we have both issues resolved (eg by allowing udevd to use a
longer timeout and revert the latter patch) we can identify the
offending drivers _and_ get the system to boot by simply adding a
kernel commandline parameter.
Which is _far_ preferrable from a maintenance perspective.
Users tend to become annoyed if their system doesn't boot ...
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@xxxxxxx +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
