Switch device scanning logic in the ipr driver to use
the async scan API. This speeds up boot times, particularly
on large systems.
Signed-off-by: Brian King <brking@xxxxxxxxxxxxxxxxxx>
---
drivers/scsi/ipr.c | 88 +++++++++++++++++++++++++----------------------------
drivers/scsi/ipr.h | 4 --
2 files changed, 44 insertions(+), 48 deletions(-)
diff -puN drivers/scsi/ipr.c~ipr_async_scanning_boot drivers/scsi/ipr.c
--- linux/drivers/scsi/ipr.c~ipr_async_scanning_boot 2014-06-12 10:17:39.000000000 -0500
+++ linux-bjking1/drivers/scsi/ipr.c 2014-07-23 15:52:04.056004810 -0500
@@ -1426,16 +1426,14 @@ static void ipr_handle_config_change(str
if (res->sdev) {
res->del_from_ml = 1;
res->res_handle = IPR_INVALID_RES_HANDLE;
- if (ioa_cfg->allow_ml_add_del)
- schedule_work(&ioa_cfg->work_q);
+ schedule_work(&ioa_cfg->work_q);
} else {
ipr_clear_res_target(res);
list_move_tail(&res->queue, &ioa_cfg->free_res_q);
}
} else if (!res->sdev || res->del_from_ml) {
res->add_to_ml = 1;
- if (ioa_cfg->allow_ml_add_del)
- schedule_work(&ioa_cfg->work_q);
+ schedule_work(&ioa_cfg->work_q);
}
ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb);
@@ -3263,8 +3261,7 @@ static void ipr_worker_thread(struct wor
restart:
do {
did_work = 0;
- if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].allow_cmds ||
- !ioa_cfg->allow_ml_add_del) {
+ if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].allow_cmds) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return;
}
@@ -3301,6 +3298,7 @@ restart:
}
}
+ ioa_cfg->scan_done = 1;
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
kobject_uevent(&ioa_cfg->host->shost_dev.kobj, KOBJ_CHANGE);
LEAVE;
@@ -5238,6 +5236,28 @@ static int ipr_cancel_op(struct scsi_cmn
* @scsi_cmd: scsi command struct
*
* Return value:
+ * 0 if scan in progress / 1 if scan is complete
+ **/
+static int ipr_scan_finished(struct Scsi_Host *shost, unsigned long elapsed_time)
+{
+ unsigned long lock_flags;
+ struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata;
+ int rc = 0;
+
+ spin_lock_irqsave(shost->host_lock, lock_flags);
+ if (ioa_cfg->hrrq[IPR_INIT_HRRQ].ioa_is_dead || ioa_cfg->scan_done)
+ rc = 1;
+ if ((elapsed_time/HZ) > (ioa_cfg->transop_timeout * 2))
+ rc = 1;
+ spin_unlock_irqrestore(shost->host_lock, lock_flags);
+ return rc;
+}
+
+/**
+ * ipr_eh_host_reset - Reset the host adapter
+ * @scsi_cmd: scsi command struct
+ *
+ * Return value:
* SUCCESS / FAILED
**/
static int ipr_eh_abort(struct scsi_cmnd *scsi_cmd)
@@ -6332,6 +6352,7 @@ static struct scsi_host_template driver_
.slave_alloc = ipr_slave_alloc,
.slave_configure = ipr_slave_configure,
.slave_destroy = ipr_slave_destroy,
+ .scan_finished = ipr_scan_finished,
.target_alloc = ipr_target_alloc,
.target_destroy = ipr_target_destroy,
.change_queue_depth = ipr_change_queue_depth,
@@ -6873,7 +6894,7 @@ static int ipr_ioa_reset_done(struct ipr
ioa_cfg->doorbell |= IPR_RUNTIME_RESET;
list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
- if (ioa_cfg->allow_ml_add_del && (res->add_to_ml || res->del_from_ml)) {
+ if (res->add_to_ml || res->del_from_ml) {
ipr_trace;
break;
}
@@ -6902,6 +6923,7 @@ static int ipr_ioa_reset_done(struct ipr
if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].allow_cmds)
scsi_block_requests(ioa_cfg->host);
+ schedule_work(&ioa_cfg->work_q);
LEAVE;
return IPR_RC_JOB_RETURN;
}
@@ -7642,6 +7664,19 @@ static int ipr_ioafp_page0_inquiry(struc
type[4] = '\0';
ioa_cfg->type = simple_strtoul((char *)type, NULL, 16);
+ if (ipr_invalid_adapter(ioa_cfg)) {
+ dev_err(&ioa_cfg->pdev->dev,
+ "Adapter not supported in this hardware configuration.\n");
+
+ if (!ipr_testmode) {
+ ioa_cfg->reset_retries += IPR_NUM_RESET_RELOAD_RETRIES;
+ ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
+ list_add_tail(&ipr_cmd->queue,
+ &ioa_cfg->hrrq->hrrq_free_q);
+ return IPR_RC_JOB_RETURN;
+ }
+ }
+
ipr_cmd->job_step = ipr_ioafp_page3_inquiry;
ipr_ioafp_inquiry(ipr_cmd, 1, 0,
@@ -8829,20 +8864,6 @@ static int ipr_probe_ioa_part2(struct ip
_ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_enable_ioa,
IPR_SHUTDOWN_NONE);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
- wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
- spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
-
- if (ioa_cfg->hrrq[IPR_INIT_HRRQ].ioa_is_dead) {
- rc = -EIO;
- } else if (ipr_invalid_adapter(ioa_cfg)) {
- if (!ipr_testmode)
- rc = -EIO;
-
- dev_err(&ioa_cfg->pdev->dev,
- "Adapter not supported in this hardware configuration.\n");
- }
-
- spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
LEAVE;
return rc;
@@ -9294,7 +9315,7 @@ static void ipr_init_ioa_cfg(struct ipr_
* ioa_cfg->max_devs_supported)));
}
- host->max_channel = IPR_MAX_BUS_TO_SCAN;
+ host->max_channel = IPR_VSET_BUS;
host->unique_id = host->host_no;
host->max_cmd_len = IPR_MAX_CDB_LEN;
host->can_queue = ioa_cfg->max_cmds;
@@ -9793,25 +9814,6 @@ out_scsi_host_put:
}
/**
- * ipr_scan_vsets - Scans for VSET devices
- * @ioa_cfg: ioa config struct
- *
- * Description: Since the VSET resources do not follow SAM in that we can have
- * sparse LUNs with no LUN 0, we have to scan for these ourselves.
- *
- * Return value:
- * none
- **/
-static void ipr_scan_vsets(struct ipr_ioa_cfg *ioa_cfg)
-{
- int target, lun;
-
- for (target = 0; target < IPR_MAX_NUM_TARGETS_PER_BUS; target++)
- for (lun = 0; lun < IPR_MAX_NUM_VSET_LUNS_PER_TARGET; lun++)
- scsi_add_device(ioa_cfg->host, IPR_VSET_BUS, target, lun);
-}
-
-/**
* ipr_initiate_ioa_bringdown - Bring down an adapter
* @ioa_cfg: ioa config struct
* @shutdown_type: shutdown type
@@ -9966,10 +9968,6 @@ static int ipr_probe(struct pci_dev *pde
}
scsi_scan_host(ioa_cfg->host);
- ipr_scan_vsets(ioa_cfg);
- scsi_add_device(ioa_cfg->host, IPR_IOA_BUS, IPR_IOA_TARGET, IPR_IOA_LUN);
- ioa_cfg->allow_ml_add_del = 1;
- ioa_cfg->host->max_channel = IPR_VSET_BUS;
ioa_cfg->iopoll_weight = ioa_cfg->chip_cfg->iopoll_weight;
if (ioa_cfg->iopoll_weight && ioa_cfg->sis64 && ioa_cfg->nvectors > 1) {
diff -puN drivers/scsi/ipr.h~ipr_async_scanning_boot drivers/scsi/ipr.h
--- linux/drivers/scsi/ipr.h~ipr_async_scanning_boot 2014-06-12 10:17:39.000000000 -0500
+++ linux-bjking1/drivers/scsi/ipr.h 2014-07-23 15:52:04.050004860 -0500
@@ -156,13 +156,11 @@
#define IPR_MAX_NUM_TARGETS_PER_BUS 256
#define IPR_MAX_NUM_LUNS_PER_TARGET 256
-#define IPR_MAX_NUM_VSET_LUNS_PER_TARGET 8
#define IPR_VSET_BUS 0xff
#define IPR_IOA_BUS 0xff
#define IPR_IOA_TARGET 0xff
#define IPR_IOA_LUN 0xff
#define IPR_MAX_NUM_BUSES 16
-#define IPR_MAX_BUS_TO_SCAN IPR_MAX_NUM_BUSES
#define IPR_NUM_RESET_RELOAD_RETRIES 3
@@ -1452,7 +1450,7 @@ struct ipr_ioa_cfg {
u8 in_ioa_bringdown:1;
u8 ioa_unit_checked:1;
u8 dump_taken:1;
- u8 allow_ml_add_del:1;
+ u8 scan_done:1;
u8 needs_hard_reset:1;
u8 dual_raid:1;
u8 needs_warm_reset:1;
_
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
