Re: [PATCH 4/5] [SCSI] Do not use platform_bus as a parent

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2014-07-25 at 15:23 +0100, Pawel Moll wrote:
> The host devices without a parent were "forcefully adopted"
> by platform bus. This patch removes this assignment. In
> effect the dev_dev may be NULL now, which means ISA.
> 
> Cc: James E.J. Bottomley <JBottomley@xxxxxxxxxxxxx>
> Cc: linux-scsi@xxxxxxxxxxxxxxx
> Signed-off-by: Pawel Moll <pawel.moll@xxxxxxx>
> ---
> 
> This patch is a part of effort to remove references to platform_bus
> and make it static.
> 
> James, could you please have a look and advice if the change is
> correct? Would you happen to know the "real reasons" behind
> using the root platform_bus device a parent?

Yes, for DMA purposes, the parent cannot now be NULL; we'll get a panic
in the DMA transfers if it is.  A lot of the legacy ISA device on x86
and I thought some ARM SOC devices don't pass in the parent device, so
we hang them off a known parent.

You can grep for it; these are the devices that will begin to panic if
you apply this patch:

arch/ia64/hp/sim/simscsi.c:     error = scsi_add_host(host, NULL);
drivers/scsi/a2091.c:   error = scsi_add_host(instance, NULL);
drivers/scsi/a3000.c:   error = scsi_add_host(instance, NULL);
drivers/scsi/aha152x.c: if( scsi_add_host(shpnt, NULL) ) {
drivers/scsi/gdth.c:    error = scsi_add_host(shp, NULL);
drivers/scsi/gdth.c:    error = scsi_add_host(shp, NULL);
drivers/scsi/gvp11.c:   error = scsi_add_host(instance, NULL);
drivers/scsi/imm.c:     err = scsi_add_host(host, NULL);
drivers/scsi/pcmcia/fdomain_stub.c:    if (scsi_add_host(host, NULL))
drivers/scsi/pcmcia/nsp_cs.c:   ret = scsi_add_host (host, NULL);
drivers/scsi/pcmcia/qlogic_stub.c:      if (scsi_add_host(shost, NULL))
drivers/scsi/pcmcia/sym53c500_cs.c:     if (scsi_add_host(host, NULL))
drivers/scsi/ppa.c:     err = scsi_add_host(host, NULL);
drivers/scsi/qlogicfas.c:       if (scsi_add_host(hreg, NULL))
drivers/scsi/scsi_module.c:             error = scsi_add_host(shost, NULL);
drivers/scsi/sgiwd93.c: err = scsi_add_host(host, NULL);

Note I've picked up scsi_module, so anything that uses the SCSI module
interface also has this problem.

James


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux