Thanks, this one looks good to me. Can someone else give me a second review on the attached patch so I can merged it? --- >From 95bc83fa0d6e9a6152cd6fce79ff87c0994e83ed Mon Sep 17 00:00:00 2001 From: Janusz Dziemidowicz <rraptorr@xxxxxxxxxxxx> Date: Thu, 24 Jul 2014 15:48:46 +0200 Subject: [PATCH] Do not issue SCSI RSOC command to Promise Vtrak E610f Some devices don't like REPORT SUPPORTED OPERATION CODES and will simply timeout causing sd_mod init to take a very very long time. Introduce BLIST_NO_RSOC scsi scan flag, that stops RSOC from being issued. Add it to Promise Vtrak E610f entry in scsi scan blacklist. Fixes bug #79901 reported at https://bugzilla.kernel.org/show_bug.cgi?id=79901 Fixes: 98dcc2946adb ("SCSI: sd: Update WRITE SAME heuristics") Signed-off-by: Janusz Dziemidowicz <rraptorr@xxxxxxxxxxxx> --- drivers/scsi/scsi_devinfo.c | 1 + drivers/scsi/scsi_scan.c | 6 ++++++ include/scsi/scsi_devinfo.h | 1 + 3 files changed, 8 insertions(+) diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index f969aca..49014a1 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -222,6 +222,7 @@ static struct { {"PIONEER", "CD-ROM DRM-602X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, {"PIONEER", "CD-ROM DRM-604X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, {"PIONEER", "CD-ROM DRM-624X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, + {"Promise", "VTrak E610f", NULL, BLIST_SPARSELUN | BLIST_NO_RSOC}, {"Promise", "", NULL, BLIST_SPARSELUN}, {"QUANTUM", "XP34301", "1071", BLIST_NOTQ}, {"REGAL", "CDC-4X", NULL, BLIST_MAX5LUN | BLIST_SINGLELUN}, diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index e02b3aa..70919fc 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -922,6 +922,12 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, if (*bflags & BLIST_USE_10_BYTE_MS) sdev->use_10_for_ms = 1; + /* some devices don't like REPORT SUPPORTED OPERATION CODES + * and will simply timeout causing sd_mod init to take a very + * very long time */ + if (*bflags & BLIST_NO_RSOC) + sdev->no_report_opcodes = 1; + /* set the device running here so that slave configure * may do I/O */ ret = scsi_device_set_state(sdev, SDEV_RUNNING); diff --git a/include/scsi/scsi_devinfo.h b/include/scsi/scsi_devinfo.h index 447d2d7..1d5ba9e 100644 --- a/include/scsi/scsi_devinfo.h +++ b/include/scsi/scsi_devinfo.h @@ -32,4 +32,5 @@ #define BLIST_ATTACH_PQ3 0x1000000 /* Scan: Attach to PQ3 devices */ #define BLIST_NO_DIF 0x2000000 /* Disable T10 PI (DIF) */ #define BLIST_SKIP_VPD_PAGES 0x4000000 /* Ignore SBC-3 VPD pages */ +#define BLIST_NO_RSOC 0x8000000 /* don't try REPORT SUPPORTED OPERATION CODES */ #endif -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
