Re: [PATCH V3 1/7] Drivers: scsi: storvsc: Change the limits to reflect the values on the host

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 14, 2014 at 08:15:17AM +0200, Hannes Reinecke wrote:
> Limiting max_lun to 255 will make the driver to _not_ respond to LUNs higher
> than that; ie Well-known LUN won't work here.
> Also the SCSI stack will be using REPORT LUNS anyway since you're
> advertising SPC-2 compliance. So your driver runs into issues if Hyper-V
> would ever return more than 256 LUNs with the REPORT LUN command or if any
> of the LUNs has an addressing scheme other than
> '0x00'.
> I would suggest to raise this to the technical limit (ie the largest LUN
> which the _protocol_ supports) and let REPORT LUNS deal with the actual
> LUNs.

I suspect hypverv doesn't support anything more.  For now I'd be
inclined to just put it in ASAP and if your suggestion works out fix it
up later, although I'll wait a bit for more review feedback.

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux