On 07/10/2014 09:41 AM, Maurizio Lombardi wrote:
During IO with fabric faults, one generally sees several "Unhandled error code" messages in the syslog as shown below: sd 4:0:6:2: [sdbw] Unhandled error code sd 4:0:6:2: [sdbw] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK sd 4:0:6:2: [sdbw] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 end_request: I/O error, dev sdbw, sector 0 This comes from scsi_io_completion (in scsi_lib.c) while handling error codes other than DID_RESET or not deferred sense keys i.e. this is actually handled by the SCSI mid layer. But what gets displayed here is "Unhandled error code" which is quite misleading as it indicates something that is not addressed by the mid layer. The description string is based on the sense key and sometimes on the additional sense code; since the ACTION_FAIL case always prints the sense key and the additional sense code, this patch removes the description string completely because it does not add useful information. Signed-off-by: Maurizio Lombardi <mlombard@xxxxxxxxxx>
Very good. I've been wanting to do this for a long time, too. Reviewed-by: Hannes Reinecke <hare@xxxxxxx> Cheers, Hannes -- Dr. Hannes Reinecke zSeries & Storage hare@xxxxxxx +49 911 74053 688 SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
