Re: eata - issue appeared in Linus git master in last 24-48 hours

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Arthur Marsh wrote, on 30/06/14 04:31:
Hi, I haven't had time to do a git bisect yet, but just saw this after
rebuilding the kernel in the last day or so:

[    1.044035] EATA0: warning, DMA protocol support not asserted.
[    1.044035] EATA0: IRQ 11 mapped to IO-APIC IRQ 16.
[    1.046040] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[    1.046123] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=
1
[    1.046204] usb usb1: Product: EHCI Host Controller
[    1.046275] usb usb1: Manufacturer: Linux 3.16.0-rc2+ ehci_hcd
[    1.046348] usb usb1: SerialNumber: 0000:00:03.3
[    1.049496] hub 1-0:1.0: USB hub found
[    1.050029] hub 1-0:1.0: 6 ports detected
[    1.050625] BUG: spinlock wrong CPU on CPU#1, systemd-udevd/63
[    1.050700]  lock: driver_lock+0x0/0xffffef00 [eata], .magic:
dead4ead, .owne
r: systemd-udevd/63, .owner_cpu: 0
[    1.050785] CPU: 1 PID: 63 Comm: systemd-udevd Not tainted
3.16.0-rc2+ #1038
[    1.050850] Hardware name: System Manufacturer System Name/P4S800,
BIOS ASUS
P4S800 ACPI BIOS Revision 1011 Beta 001 08/30/2005
[    1.050935]  f8048100 00000000 f707fad8 c1416ba9 f43aad44 f707fb04
c1081b6f c
158aab0
[    1.051301]  f8048100 dead4ead f43aad44 0000003f 00000000 f8048100
c155b1eb 0
0000010
[    1.051678]  f707fb14 c1081bdc f8048100 f50e8000 f707fb20 c1081e43
f8048100 f
707fb2c
[    1.052051] Call Trace:
[    1.052119]  [<c1416ba9>] dump_stack+0x41/0x52
[    1.052183]  [<c1081b6f>] spin_dump+0x8c/0xde
[    1.052249]  [<c1081bdc>] spin_bug+0x1b/0x1f
[    1.052310]  [<c1081e43>] do_raw_spin_unlock+0x79/0x7b
[    1.052377]  [<c141c495>] _raw_spin_unlock_irq+0x1d/0x26
[    1.052444]  [<f8046176>] port_detect+0xa54/0xefc [eata]
[    1.052509]  [<c141a510>] ? __mutex_unlock_slowpath+0xb6/0x136
[    1.052576]  [<c141a598>] ? mutex_unlock+0x8/0xa
[    1.052641]  [<c102d766>] ? ioapic_write_entry+0x17/0x43
[    1.052706]  [<c102d78b>] ? ioapic_write_entry+0x3c/0x43
[    1.052771]  [<c102d78b>] ? ioapic_write_entry+0x3c/0x43
[    1.052837]  [<c102e633>] ? io_apic_setup_irq_pin+0x175/0x319
[    1.052904]  [<c12804bf>] ? acpi_os_release_lock+0x8/0xa
[    1.052970]  [<c131f7dc>] ? pci_conf1_read+0x43/0xdd
[    1.053036]  [<c131f801>] ? pci_conf1_read+0x68/0xdd
[    1.053101]  [<c1410ccc>] ? klist_next+0x1b/0xef
[    1.053166]  [<c1410d9e>] ? klist_next+0xed/0xef
[    1.053237]  [<c141c449>] ? _raw_spin_unlock+0x1d/0x20
[    1.053304]  [<c1410d9e>] ? klist_next+0xed/0xef
[    1.053383]  [<c12505f6>] ? pci_do_find_bus+0x36/0x36
[    1.053449]  [<c12e1a18>] ? bus_find_device+0x5b/0x7d
[    1.053511]  [<c12dfc7c>] ? put_device+0xf/0x11
[    1.053571]  [<c124f172>] ? pci_dev_put+0xf/0x11
[    1.053635]  [<c125078e>] ? pci_get_dev_by_id+0x3f/0x8a
[    1.053701]  [<c12505f6>] ? pci_do_find_bus+0x36/0x36
[    1.053763]  [<c12508d4>] ? pci_get_class+0x46/0x48
[    1.053829]  [<f80466f7>] eata2x_detect+0xd9/0x3ef [eata]
[    1.053836] ohci-pci: OHCI PCI platform driver
[    1.054213] ohci-pci 0000:00:03.0: OHCI PCI host controller
[    1.054231] ohci-pci 0000:00:03.0: new USB bus registered, assigned
bus numbe
r 2
[    1.054293] ohci-pci 0000:00:03.0: irq 9, io mem 0xbe800000
[    1.054782]  [<f8021000>] ? 0xf8020fff
[    1.054853]  [<f8021054>] init_this_scsi_driver+0x54/0x1000 [eata]
[    1.054923]  [<f8021000>] ? 0xf8020fff
[    1.054987]  [<c100041b>] do_one_initcall+0x75/0x198
[    1.055051]  [<f8021000>] ? 0xf8020fff
[    1.055115]  [<c11255cd>] ? __vunmap+0x77/0xce
[    1.055179]  [<c10aa53b>] load_module+0x19a6/0x224a
[    1.055248]  [<c10aaed2>] SyS_finit_module+0x5c/0x6b
[    1.055320]  [<f8039000>] ? 0xf8038fff
[    1.055385]  [<c141ce0e>] syscall_call+0x7/0xb
[    1.060902] EATA/DMA 2.0x: Copyright (C) 1994-2003 Dario Ballabio.
[    1.060966] EATA config options -> tm:1, lc:y, mq:16, rs:y, et:n,
ip:n, ep:n,
  pp:y.
[    1.061029] EATA0: 2.0C, PCI 0x7410, IRQ 16, BMST, SG 122, MB 64.
[    1.061080] EATA0: wide SCSI support enabled, max_id 16, max_lun 8.
[    1.061132] EATA0: SCSI channel 0 enabled, host target ID 7.
[    1.061192] scsi0 : EATA/DMA 2.0x rev. 8.10.00

This wasn't repeated on a reboot, so at this stage it is a one-off problem.

Arthur.

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux