Up to now, Driver allocates a single contiguous block of memory
pool for all reply queues and passes down a single address in the
ReplyDescriptorPostQueueAddress field of the IOC Init Request
Message to the firmware.
When firmware receives this address, it will program each of the
Reply Descriptor Post Queue registers, as each reply queue has its
own register. Thus the firmware, starting from a base address it
determines the starting address of the subsequent reply queues
through some simple arithmetic calculations.
The size of this contiguous block of memory pool is directly proportional
to number of MSI-X vectors and the HBA queue depth. For example higher
MSIX vectors requires larger contiguous block of memory pool.
But some of the OS kernels are unable to allocate this larger
contiguous block of memory pool.
So, the proposal is to allocate memory independently for each
Reply Queue and pass down all of the addresses to the firmware.
Then the firmware will just take each address and program the value
into the correct register.
When HBAs with older firmware(i.e. without RDPQ capability) is used
with this new driver then the max_msix_vectors value would be set
to 8 by default.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxxxxxxxx>
---
drivers/scsi/mpt2sas/mpt2sas_base.c | 923 +++++++++++++++++++++--------------
drivers/scsi/mpt2sas/mpt2sas_base.h | 18 +-
2 files changed, 558 insertions(+), 383 deletions(-)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 774720f..81f1d58 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -1427,6 +1427,9 @@ _base_enable_msix(struct MPT2SAS_ADAPTER *ioc)
ioc->reply_queue_count = min_t(int, ioc->cpu_count,
ioc->msix_vector_count);
+ if (!ioc->rdpq_array_enable && max_msix_vectors == -1)
+ max_msix_vectors = 8;
+
if (max_msix_vectors > 0) {
ioc->reply_queue_count = min_t(int, max_msix_vectors,
ioc->reply_queue_count);
@@ -1480,6 +1483,335 @@ _base_enable_msix(struct MPT2SAS_ADAPTER *ioc)
}
/**
+ * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
+ * a write to the doorbell)
+ * @ioc: per adapter object
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
+ */
+static int
+_base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout,
+ int sleep_flag)
+{
+ u32 cntdn, count;
+ u32 int_status;
+
+ count = 0;
+ cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+ do {
+ int_status = readl(&ioc->chip->HostInterruptStatus);
+ if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
+ dhsprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "%s: successful count(%d), timeout(%d)\n",
+ ioc->name, __func__, count, timeout));
+ return 0;
+ }
+ if (sleep_flag == CAN_SLEEP)
+ msleep(1);
+ else
+ udelay(500);
+ count++;
+ } while (--cntdn);
+
+ printk(MPT2SAS_ERR_FMT
+ "%s: failed due to timeout count(%d), int_status(%x)!\n",
+ ioc->name, __func__, count, int_status);
+ return -EFAULT;
+}
+
+/**
+ * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
+ * @ioc: per adapter object
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
+ * doorbell.
+ */
+static int
+_base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout,
+ int sleep_flag)
+{
+ u32 cntdn, count;
+ u32 int_status;
+ u32 doorbell;
+
+ count = 0;
+ cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+ do {
+ int_status = readl(&ioc->chip->HostInterruptStatus);
+ if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
+ dhsprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "%s: successful count(%d), timeout(%d)\n",
+ ioc->name, __func__, count, timeout));
+ return 0;
+ } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
+ doorbell = readl(&ioc->chip->Doorbell);
+ if ((doorbell & MPI2_IOC_STATE_MASK) ==
+ MPI2_IOC_STATE_FAULT) {
+ mpt2sas_base_fault_info(ioc , doorbell);
+ return -EFAULT;
+ }
+ } else if (int_status == 0xFFFFFFFF)
+ goto out;
+
+ if (sleep_flag == CAN_SLEEP)
+ msleep(1);
+ else
+ udelay(500);
+ count++;
+ } while (--cntdn);
+
+ out:
+ printk(MPT2SAS_ERR_FMT
+ "%s: failed due to timeout count(%d), int_status(%x)!\n",
+ ioc->name, __func__, count, int_status);
+ return -EFAULT;
+}
+
+/**
+ * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
+ * @ioc: per adapter object
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ *
+ */
+static int
+_base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER *ioc, int timeout,
+ int sleep_flag)
+{
+ u32 cntdn, count;
+ u32 doorbell_reg;
+
+ count = 0;
+ cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
+ do {
+ doorbell_reg = readl(&ioc->chip->Doorbell);
+ if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
+ dhsprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "%s: successful count(%d), timeout(%d)\n",
+ ioc->name, __func__, count, timeout));
+ return 0;
+ }
+ if (sleep_flag == CAN_SLEEP)
+ msleep(1);
+ else
+ udelay(500);
+ count++;
+ } while (--cntdn);
+
+ printk(MPT2SAS_ERR_FMT
+ "%s: failed due to timeout count(%d), doorbell_reg(%x)!\n",
+ ioc->name, __func__, count, doorbell_reg);
+ return -EFAULT;
+}
+
+/**
+ * _base_handshake_req_reply_wait - send request thru doorbell interface
+ * @ioc: per adapter object
+ * @request_bytes: request length
+ * @request: pointer having request payload
+ * @reply_bytes: reply length
+ * @reply: pointer to reply payload
+ * @timeout: timeout in second
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes,
+ u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag)
+{
+ MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
+ int i;
+ u8 failed;
+ u16 dummy;
+ __le32 *mfp;
+
+ /* make sure doorbell is not in use */
+ if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
+ printk(MPT2SAS_ERR_FMT "doorbell is in use (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+
+ /* clear pending doorbell interrupts from previous state changes */
+ if (readl(&ioc->chip->HostInterruptStatus) &
+ MPI2_HIS_IOC2SYS_DB_STATUS)
+ writel(0, &ioc->chip->HostInterruptStatus);
+
+ /* send message to ioc */
+ writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) |
+ ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
+ &ioc->chip->Doorbell);
+
+ if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) {
+ printk(MPT2SAS_ERR_FMT
+ "doorbell handshake int failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+ writel(0, &ioc->chip->HostInterruptStatus);
+
+ if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) {
+ printk(MPT2SAS_ERR_FMT
+ "doorbell handshake ack failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+
+ /* send message 32-bits at a time */
+ for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) {
+ writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell);
+ if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag)))
+ failed = 1;
+ }
+
+ if (failed) {
+ printk(MPT2SAS_ERR_FMT
+ "doorbell handshake sending request failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+
+ /* now wait for the reply */
+ if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) {
+ printk(MPT2SAS_ERR_FMT
+ "doorbell handshake int failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+
+ /* read the first two 16-bits, it gives the total length of the reply */
+ reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell)
+ & MPI2_DOORBELL_DATA_MASK);
+ writel(0, &ioc->chip->HostInterruptStatus);
+ if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
+ printk(MPT2SAS_ERR_FMT
+ "doorbell handshake int failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+ reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell)
+ & MPI2_DOORBELL_DATA_MASK);
+ writel(0, &ioc->chip->HostInterruptStatus);
+
+ for (i = 2; i < default_reply->MsgLength * 2; i++) {
+ if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
+ printk(MPT2SAS_ERR_FMT
+ "doorbell handshake int failed (line=%d)\n",
+ ioc->name, __LINE__);
+ return -EFAULT;
+ }
+ if (i >= reply_bytes/2) /* overflow case */
+ dummy = readl(&ioc->chip->Doorbell);
+ else
+ reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell)
+ & MPI2_DOORBELL_DATA_MASK);
+ writel(0, &ioc->chip->HostInterruptStatus);
+ }
+
+ _base_wait_for_doorbell_int(ioc, 5, sleep_flag);
+ if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) {
+ dhsprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "doorbell is in use (line=%d)\n", ioc->name, __LINE__));
+ }
+ writel(0, &ioc->chip->HostInterruptStatus);
+
+ if (ioc->logging_level & MPT_DEBUG_INIT) {
+ mfp = (__le32 *)reply;
+ pr_info("\toffset:data\n");
+ for (i = 0; i < reply_bytes/4; i++)
+ pr_info("\t[0x%02x]:%08x\n", i*4,
+ le32_to_cpu(mfp[i]));
+ }
+ return 0;
+}
+
+/**
+ * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
+ * @ioc: per adapter object
+ * @sleep_flag: CAN_SLEEP or NO_SLEEP
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
+{
+ Mpi2IOCFactsRequest_t mpi_request;
+ Mpi2IOCFactsReply_t mpi_reply;
+ struct mpt2sas_facts *facts;
+ int mpi_reply_sz, mpi_request_sz, r;
+
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
+ __func__));
+
+ mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
+ mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
+ memset(&mpi_request, 0, mpi_request_sz);
+ mpi_request.Function = MPI2_FUNCTION_IOC_FACTS;
+ r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
+ (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
+
+ if (r != 0) {
+ printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
+ ioc->name, __func__, r);
+ return r;
+ }
+
+ facts = &ioc->facts;
+ memset(facts, 0, sizeof(struct mpt2sas_facts));
+ facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion);
+ facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion);
+ facts->VP_ID = mpi_reply.VP_ID;
+ facts->VF_ID = mpi_reply.VF_ID;
+ facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions);
+ facts->MaxChainDepth = mpi_reply.MaxChainDepth;
+ facts->WhoInit = mpi_reply.WhoInit;
+ facts->NumberOfPorts = mpi_reply.NumberOfPorts;
+ facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors;
+ facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit);
+ facts->MaxReplyDescriptorPostQueueDepth =
+ le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth);
+ facts->ProductID = le16_to_cpu(mpi_reply.ProductID);
+ facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities);
+ if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
+ ioc->ir_firmware = 1;
+ if ((facts->IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE))
+ ioc->rdpq_array_capable = 1;
+ facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
+ facts->IOCRequestFrameSize =
+ le16_to_cpu(mpi_reply.IOCRequestFrameSize);
+ facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators);
+ facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets);
+ ioc->shost->max_id = -1;
+ facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders);
+ facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures);
+ facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags);
+ facts->HighPriorityCredit =
+ le16_to_cpu(mpi_reply.HighPriorityCredit);
+ facts->ReplyFrameSize = mpi_reply.ReplyFrameSize;
+ facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle);
+
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "hba queue depth(%d), max chains per io(%d)\n", ioc->name,
+ facts->RequestCredit, facts->MaxChainDepth));
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "request frame size(%d), reply frame size(%d)\n", ioc->name,
+ facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4));
+ return 0;
+}
+
+/**
* mpt2sas_base_map_resources - map in controller resources (io/irq/memap)
* @ioc: per adapter object
*
@@ -1555,6 +1887,16 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
}
_base_mask_interrupts(ioc);
+
+ r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+ if (r)
+ goto out_fail;
+
+ if (!ioc->rdpq_array_enable_assigned) {
+ ioc->rdpq_array_enable = ioc->rdpq_array_capable;
+ ioc->rdpq_array_enable_assigned = 1;
+ }
+
r = _base_enable_msix(ioc);
if (r)
goto out_fail;
@@ -2393,15 +2735,39 @@ _base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc)
ioc->reply_free = NULL;
}
- if (ioc->reply_post_free) {
- pci_pool_free(ioc->reply_post_free_dma_pool,
- ioc->reply_post_free, ioc->reply_post_free_dma);
+ if (ioc->reply_post) {
+ if (ioc->rdpq_array_enable) {
+ for (i = 0; i < ioc->reply_queue_count; i++) {
+ if (ioc->reply_post[i].reply_post_free) {
+ pci_pool_free(
+ ioc->reply_post_free_dma_pool,
+ ioc->reply_post[i].reply_post_free,
+ ioc->
+ reply_post[i].reply_post_free_dma);
+ dexitprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "reply_post_free_pool(0x%p): free\n",
+ ioc->name,
+ ioc->reply_post[i].reply_post_free)
+ );
+ ioc->reply_post[i].reply_post_free =
+ NULL;
+ }
+ }
+ } else {
+ if (ioc->reply_post[0].reply_post_free) {
+ pci_pool_free(ioc->reply_post_free_dma_pool,
+ ioc->reply_post[0].reply_post_free,
+ ioc->reply_post[0].reply_post_free_dma);
+ dexitprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "reply_post_free_pool(0x%p): free\n",
+ ioc->name,
+ ioc->reply_post[0].reply_post_free));
+ ioc->reply_post[0].reply_post_free = NULL;
+ }
+ }
if (ioc->reply_post_free_dma_pool)
pci_pool_destroy(ioc->reply_post_free_dma_pool);
- dexitprintk(ioc, printk(MPT2SAS_INFO_FMT
- "reply_post_free_pool(0x%p): free\n", ioc->name,
- ioc->reply_post_free));
- ioc->reply_post_free = NULL;
+ kfree(ioc->reply_post);
}
if (ioc->config_page) {
@@ -2755,36 +3121,84 @@ chain_done:
"(0x%llx)\n", ioc->name, (unsigned long long)ioc->reply_free_dma));
total_sz += sz;
- /* reply post queue, 16 byte align */
- reply_post_free_sz = ioc->reply_post_queue_depth *
- sizeof(Mpi2DefaultReplyDescriptor_t);
- if (_base_is_controller_msix_enabled(ioc))
- sz = reply_post_free_sz * ioc->reply_queue_count;
- else
+ if (ioc->rdpq_array_enable) {
+ ioc->reply_post = kcalloc(ioc->reply_queue_count,
+ sizeof(struct reply_post_struct), GFP_KERNEL);
+ /* reply post queue, 16 byte align */
+ reply_post_free_sz = ioc->reply_post_queue_depth *
+ sizeof(Mpi2DefaultReplyDescriptor_t);
sz = reply_post_free_sz;
- ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
- ioc->pdev, sz, 16, 0);
- if (!ioc->reply_post_free_dma_pool) {
- printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_create "
- "failed\n", ioc->name);
- goto out;
- }
- ioc->reply_post_free = pci_pool_alloc(ioc->reply_post_free_dma_pool ,
- GFP_KERNEL, &ioc->reply_post_free_dma);
- if (!ioc->reply_post_free) {
- printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_alloc "
- "failed\n", ioc->name);
- goto out;
+ ioc->reply_post_free_dma_pool =
+ pci_pool_create("reply_post_free pool", ioc->pdev, sz,
+ 16, 2147483648);
+ if (!ioc->reply_post_free_dma_pool) {
+ printk(MPT2SAS_ERR_FMT
+ "reply_post_free pool: pci_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ for (i = 0; i < ioc->reply_queue_count; i++) {
+ ioc->reply_post[i].reply_post_free =
+ pci_pool_alloc(ioc->reply_post_free_dma_pool,
+ GFP_KERNEL,
+ &ioc->reply_post[i].reply_post_free_dma);
+ if (!ioc->reply_post[i].reply_post_free) {
+ printk(MPT2SAS_ERR_FMT
+ "reply_post_free pool: pci_pool_alloc failed\n"
+ , ioc->name);
+ goto out;
+ }
+ memset(ioc->reply_post[i].reply_post_free, 0, sz);
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "reply post free pool (0x%p): depth(%d),"
+ "element_size(%d), pool_size(%d kB)\n", ioc->name,
+ ioc->reply_post[i].reply_post_free,
+ ioc->reply_post_queue_depth, 8, sz/1024));
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "reply_post_free_dma = (0x%llx)\n", ioc->name,
+ (unsigned long long)
+ ioc->reply_post[i].reply_post_free_dma));
+ total_sz += sz;
+ }
+ } else {
+ ioc->reply_post = kzalloc(sizeof(struct reply_post_struct),
+ GFP_KERNEL);
+ /* reply post queue, 16 byte align */
+ reply_post_free_sz = ioc->reply_post_queue_depth *
+ sizeof(Mpi2DefaultReplyDescriptor_t);
+ if (_base_is_controller_msix_enabled(ioc))
+ sz = reply_post_free_sz * ioc->reply_queue_count;
+ else
+ sz = reply_post_free_sz;
+ ioc->reply_post_free_dma_pool =
+ pci_pool_create("reply_post_free pool",
+ ioc->pdev, sz, 16, 0);
+ if (!ioc->reply_post_free_dma_pool) {
+ printk(MPT2SAS_ERR_FMT
+ "reply_post_free pool: pci_pool_create failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->reply_post[0].reply_post_free =
+ pci_pool_alloc(ioc->reply_post_free_dma_pool,
+ GFP_KERNEL, &ioc->reply_post[0].reply_post_free_dma);
+ if (!ioc->reply_post[0].reply_post_free) {
+ printk(MPT2SAS_ERR_FMT
+ "reply_post_free pool: pci_pool_alloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ memset(ioc->reply_post[0].reply_post_free, 0, sz);
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply post free pool"
+ "(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n",
+ ioc->name, ioc->reply_post[0].reply_post_free,
+ ioc->reply_post_queue_depth, 8, sz/1024));
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "reply_post_free_dma = (0x%llx)\n", ioc->name,
+ (unsigned long long)
+ ioc->reply_post[0].reply_post_free_dma));
+ total_sz += sz;
}
- memset(ioc->reply_post_free, 0, sz);
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply post free pool"
- "(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n",
- ioc->name, ioc->reply_post_free, ioc->reply_post_queue_depth, 8,
- sz/1024));
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_post_free_dma = "
- "(0x%llx)\n", ioc->name, (unsigned long long)
- ioc->reply_post_free_dma));
- total_sz += sz;
ioc->config_page_sz = 512;
ioc->config_page = pci_alloc_consistent(ioc->pdev,
@@ -2796,15 +3210,15 @@ chain_done:
}
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config page(0x%p): size"
"(%d)\n", ioc->name, ioc->config_page, ioc->config_page_sz));
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config_page_dma"
- "(0x%llx)\n", ioc->name, (unsigned long long)ioc->config_page_dma));
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config_page_dma (0x%llx)\n",
+ ioc->name, (unsigned long long)ioc->config_page_dma));
total_sz += ioc->config_page_sz;
printk(MPT2SAS_INFO_FMT "Allocated physical memory: size(%d kB)\n",
ioc->name, total_sz/1024);
- printk(MPT2SAS_INFO_FMT "Current Controller Queue Depth(%d), "
- "Max Controller Queue Depth(%d)\n",
- ioc->name, ioc->shost->can_queue, facts->RequestCredit);
+ printk(MPT2SAS_INFO_FMT
+ "Current Controller Queue Depth(%d), Max Controller Queue Depth(%d)\n",
+ ioc->name, ioc->shost->can_queue, facts->RequestCredit);
printk(MPT2SAS_INFO_FMT "Scatter Gather Elements per IO(%d)\n",
ioc->name, ioc->shost->sg_tablesize);
return 0;
@@ -2813,7 +3227,6 @@ chain_done:
return -ENOMEM;
}
-
/**
* mpt2sas_base_get_iocstate - Get the current state of a MPT adapter.
* @ioc: Pointer to MPT_ADAPTER structure
@@ -2866,135 +3279,6 @@ _base_wait_on_iocstate(struct MPT2SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
}
/**
- * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
- * a write to the doorbell)
- * @ioc: per adapter object
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- *
- * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
- */
-static int
-_base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout,
- int sleep_flag)
-{
- u32 cntdn, count;
- u32 int_status;
-
- count = 0;
- cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
- do {
- int_status = readl(&ioc->chip->HostInterruptStatus);
- if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
- dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "successful count(%d), timeout(%d)\n", ioc->name,
- __func__, count, timeout));
- return 0;
- }
- if (sleep_flag == CAN_SLEEP)
- msleep(1);
- else
- udelay(500);
- count++;
- } while (--cntdn);
-
- printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
- "int_status(%x)!\n", ioc->name, __func__, count, int_status);
- return -EFAULT;
-}
-
-/**
- * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
- * @ioc: per adapter object
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- *
- * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
- * doorbell.
- */
-static int
-_base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout,
- int sleep_flag)
-{
- u32 cntdn, count;
- u32 int_status;
- u32 doorbell;
-
- count = 0;
- cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
- do {
- int_status = readl(&ioc->chip->HostInterruptStatus);
- if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
- dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "successful count(%d), timeout(%d)\n", ioc->name,
- __func__, count, timeout));
- return 0;
- } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
- doorbell = readl(&ioc->chip->Doorbell);
- if ((doorbell & MPI2_IOC_STATE_MASK) ==
- MPI2_IOC_STATE_FAULT) {
- mpt2sas_base_fault_info(ioc , doorbell);
- return -EFAULT;
- }
- } else if (int_status == 0xFFFFFFFF)
- goto out;
-
- if (sleep_flag == CAN_SLEEP)
- msleep(1);
- else
- udelay(500);
- count++;
- } while (--cntdn);
-
- out:
- printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
- "int_status(%x)!\n", ioc->name, __func__, count, int_status);
- return -EFAULT;
-}
-
-/**
- * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
- * @ioc: per adapter object
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- *
- */
-static int
-_base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER *ioc, int timeout,
- int sleep_flag)
-{
- u32 cntdn, count;
- u32 doorbell_reg;
-
- count = 0;
- cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
- do {
- doorbell_reg = readl(&ioc->chip->Doorbell);
- if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
- dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
- "successful count(%d), timeout(%d)\n", ioc->name,
- __func__, count, timeout));
- return 0;
- }
- if (sleep_flag == CAN_SLEEP)
- msleep(1);
- else
- udelay(500);
- count++;
- } while (--cntdn);
-
- printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
- "doorbell_reg(%x)!\n", ioc->name, __func__, count, doorbell_reg);
- return -EFAULT;
-}
-
-/**
* _base_send_ioc_reset - send doorbell reset
* @ioc: per adapter object
* @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
@@ -3043,123 +3327,6 @@ _base_send_ioc_reset(struct MPT2SAS_ADAPTER *ioc, u8 reset_type, int timeout,
}
/**
- * _base_handshake_req_reply_wait - send request thru doorbell interface
- * @ioc: per adapter object
- * @request_bytes: request length
- * @request: pointer having request payload
- * @reply_bytes: reply length
- * @reply: pointer to reply payload
- * @timeout: timeout in second
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes,
- u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag)
-{
- MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
- int i;
- u8 failed;
- u16 dummy;
- __le32 *mfp;
-
- /* make sure doorbell is not in use */
- if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
- printk(MPT2SAS_ERR_FMT "doorbell is in use "
- " (line=%d)\n", ioc->name, __LINE__);
- return -EFAULT;
- }
-
- /* clear pending doorbell interrupts from previous state changes */
- if (readl(&ioc->chip->HostInterruptStatus) &
- MPI2_HIS_IOC2SYS_DB_STATUS)
- writel(0, &ioc->chip->HostInterruptStatus);
-
- /* send message to ioc */
- writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) |
- ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
- &ioc->chip->Doorbell);
-
- if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) {
- printk(MPT2SAS_ERR_FMT "doorbell handshake "
- "int failed (line=%d)\n", ioc->name, __LINE__);
- return -EFAULT;
- }
- writel(0, &ioc->chip->HostInterruptStatus);
-
- if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) {
- printk(MPT2SAS_ERR_FMT "doorbell handshake "
- "ack failed (line=%d)\n", ioc->name, __LINE__);
- return -EFAULT;
- }
-
- /* send message 32-bits at a time */
- for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) {
- writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell);
- if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag)))
- failed = 1;
- }
-
- if (failed) {
- printk(MPT2SAS_ERR_FMT "doorbell handshake "
- "sending request failed (line=%d)\n", ioc->name, __LINE__);
- return -EFAULT;
- }
-
- /* now wait for the reply */
- if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) {
- printk(MPT2SAS_ERR_FMT "doorbell handshake "
- "int failed (line=%d)\n", ioc->name, __LINE__);
- return -EFAULT;
- }
-
- /* read the first two 16-bits, it gives the total length of the reply */
- reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell)
- & MPI2_DOORBELL_DATA_MASK);
- writel(0, &ioc->chip->HostInterruptStatus);
- if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
- printk(MPT2SAS_ERR_FMT "doorbell handshake "
- "int failed (line=%d)\n", ioc->name, __LINE__);
- return -EFAULT;
- }
- reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell)
- & MPI2_DOORBELL_DATA_MASK);
- writel(0, &ioc->chip->HostInterruptStatus);
-
- for (i = 2; i < default_reply->MsgLength * 2; i++) {
- if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
- printk(MPT2SAS_ERR_FMT "doorbell "
- "handshake int failed (line=%d)\n", ioc->name,
- __LINE__);
- return -EFAULT;
- }
- if (i >= reply_bytes/2) /* overflow case */
- dummy = readl(&ioc->chip->Doorbell);
- else
- reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell)
- & MPI2_DOORBELL_DATA_MASK);
- writel(0, &ioc->chip->HostInterruptStatus);
- }
-
- _base_wait_for_doorbell_int(ioc, 5, sleep_flag);
- if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) {
- dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "doorbell is in use "
- " (line=%d)\n", ioc->name, __LINE__));
- }
- writel(0, &ioc->chip->HostInterruptStatus);
-
- if (ioc->logging_level & MPT_DEBUG_INIT) {
- mfp = (__le32 *)reply;
- printk(KERN_INFO "\toffset:data\n");
- for (i = 0; i < reply_bytes/4; i++)
- printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4,
- le32_to_cpu(mfp[i]));
- }
- return 0;
-}
-
-/**
* mpt2sas_base_sas_iounit_control - send sas iounit control to FW
* @ioc: per adapter object
* @mpi_reply: the reply payload from FW
@@ -3409,78 +3576,6 @@ _base_get_port_facts(struct MPT2SAS_ADAPTER *ioc, int port, int sleep_flag)
}
/**
- * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
- * @ioc: per adapter object
- * @sleep_flag: CAN_SLEEP or NO_SLEEP
- *
- * Returns 0 for success, non-zero for failure.
- */
-static int
-_base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
-{
- Mpi2IOCFactsRequest_t mpi_request;
- Mpi2IOCFactsReply_t mpi_reply;
- struct mpt2sas_facts *facts;
- int mpi_reply_sz, mpi_request_sz, r;
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
- __func__));
-
- mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
- mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
- memset(&mpi_request, 0, mpi_request_sz);
- mpi_request.Function = MPI2_FUNCTION_IOC_FACTS;
- r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
- (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
-
- if (r != 0) {
- printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
- ioc->name, __func__, r);
- return r;
- }
-
- facts = &ioc->facts;
- memset(facts, 0, sizeof(struct mpt2sas_facts));
- facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion);
- facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion);
- facts->VP_ID = mpi_reply.VP_ID;
- facts->VF_ID = mpi_reply.VF_ID;
- facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions);
- facts->MaxChainDepth = mpi_reply.MaxChainDepth;
- facts->WhoInit = mpi_reply.WhoInit;
- facts->NumberOfPorts = mpi_reply.NumberOfPorts;
- facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors;
- facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit);
- facts->MaxReplyDescriptorPostQueueDepth =
- le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth);
- facts->ProductID = le16_to_cpu(mpi_reply.ProductID);
- facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities);
- if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
- ioc->ir_firmware = 1;
- facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
- facts->IOCRequestFrameSize =
- le16_to_cpu(mpi_reply.IOCRequestFrameSize);
- facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators);
- facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets);
- ioc->shost->max_id = -1;
- facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders);
- facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures);
- facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags);
- facts->HighPriorityCredit =
- le16_to_cpu(mpi_reply.HighPriorityCredit);
- facts->ReplyFrameSize = mpi_reply.ReplyFrameSize;
- facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle);
-
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hba queue depth(%d), "
- "max chains per io(%d)\n", ioc->name, facts->RequestCredit,
- facts->MaxChainDepth));
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request frame size(%d), "
- "reply frame size(%d)\n", ioc->name,
- facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4));
- return 0;
-}
-
-/**
* _base_send_ioc_init - send ioc_init to firmware
* @ioc: per adapter object
* @sleep_flag: CAN_SLEEP or NO_SLEEP
@@ -3492,9 +3587,13 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
Mpi2IOCInitRequest_t mpi_request;
Mpi2IOCInitReply_t mpi_reply;
- int r;
+ int i, r = 0;
struct timeval current_time;
u16 ioc_status;
+ u32 reply_post_free_array_sz;
+ Mpi2IOCInitRDPQArrayEntry *reply_post_free_array = NULL;
+ dma_addr_t reply_post_free_array_dma;
+ struct dma_pool *reply_post_free_array_dma_pool = NULL;
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
@@ -3523,9 +3622,41 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
cpu_to_le64((u64)ioc->request_dma);
mpi_request.ReplyFreeQueueAddress =
cpu_to_le64((u64)ioc->reply_free_dma);
- mpi_request.ReplyDescriptorPostQueueAddress =
- cpu_to_le64((u64)ioc->reply_post_free_dma);
-
+ if (ioc->rdpq_array_enable) {
+ reply_post_free_array_sz = ioc->reply_queue_count *
+ sizeof(Mpi2IOCInitRDPQArrayEntry);
+ reply_post_free_array_dma_pool =
+ pci_pool_create("reply_post_free_array pool",
+ ioc->pdev, reply_post_free_array_sz, 16, 0);
+ if (!reply_post_free_array_dma_pool) {
+ printk(MPT2SAS_ERR_FMT
+ "reply_post_free_array pool: pci_pool_create failed\n",
+ ioc->name);
+ r = -ENOMEM;
+ goto out;
+ }
+ reply_post_free_array =
+ pci_pool_alloc(reply_post_free_array_dma_pool,
+ GFP_KERNEL, &reply_post_free_array_dma);
+ if (!reply_post_free_array) {
+ printk(MPT2SAS_ERR_FMT
+ "reply_post_free_array pool: pci_pool_alloc failed\n",
+ ioc->name);
+ r = -ENOMEM;
+ goto out;
+ }
+ memset(reply_post_free_array, 0, reply_post_free_array_sz);
+ for (i = 0; i < ioc->reply_queue_count; i++)
+ reply_post_free_array[i].RDPQBaseAddress =
+ cpu_to_le64(
+ (u64)ioc->reply_post[i].reply_post_free_dma);
+ mpi_request.MsgFlags = MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE;
+ mpi_request.ReplyDescriptorPostQueueAddress =
+ cpu_to_le64((u64)reply_post_free_array_dma);
+ } else {
+ mpi_request.ReplyDescriptorPostQueueAddress =
+ cpu_to_le64((u64)ioc->reply_post[0].reply_post_free_dma);
+ }
/* This time stamp specifies number of milliseconds
* since epoch ~ midnight January 1, 1970.
@@ -3553,7 +3684,7 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
if (r != 0) {
printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
ioc->name, __func__, r);
- return r;
+ goto out;
}
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
@@ -3563,7 +3694,17 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
r = -EIO;
}
- return 0;
+ out:
+ if (ioc->rdpq_array_enable) {
+ if (reply_post_free_array) {
+ pci_pool_free(reply_post_free_array_dma_pool,
+ reply_post_free_array, reply_post_free_array_dma);
+ reply_post_free_array = NULL;
+ }
+ if (reply_post_free_array_dma_pool)
+ pci_pool_destroy(reply_post_free_array_dma_pool);
+ }
+ return r;
}
/**
@@ -4088,7 +4229,7 @@ _base_make_ioc_ready(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
static int
_base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
- int r, i;
+ int r, i, j = 0;
unsigned long flags;
u32 reply_address;
u16 smid;
@@ -4167,19 +4308,32 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
_base_assign_reply_queues(ioc);
/* initialize Reply Post Free Queue */
- reply_post_free = (long)ioc->reply_post_free;
- reply_post_free_sz = ioc->reply_post_queue_depth *
- sizeof(Mpi2DefaultReplyDescriptor_t);
- list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
- reply_q->reply_post_host_index = 0;
- reply_q->reply_post_free = (Mpi2ReplyDescriptorsUnion_t *)
- reply_post_free;
- for (i = 0; i < ioc->reply_post_queue_depth; i++)
- reply_q->reply_post_free[i].Words =
- cpu_to_le64(ULLONG_MAX);
- if (!_base_is_controller_msix_enabled(ioc))
- goto skip_init_reply_post_free_queue;
- reply_post_free += reply_post_free_sz;
+ if (ioc->rdpq_array_enable) {
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+ reply_q->reply_post_host_index = 0;
+ reply_q->reply_post_free =
+ ioc->reply_post[j++].reply_post_free;
+ for (i = 0; i < ioc->reply_post_queue_depth; i++)
+ reply_q->reply_post_free[i].Words =
+ cpu_to_le64(ULLONG_MAX);
+ if (!_base_is_controller_msix_enabled(ioc))
+ goto skip_init_reply_post_free_queue;
+ }
+ } else {
+ reply_post_free = (long)ioc->reply_post[0].reply_post_free;
+ reply_post_free_sz = ioc->reply_post_queue_depth *
+ sizeof(Mpi2DefaultReplyDescriptor_t);
+ list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+ reply_q->reply_post_host_index = 0;
+ reply_q->reply_post_free =
+ (Mpi2ReplyDescriptorsUnion_t *)reply_post_free;
+ for (i = 0; i < ioc->reply_post_queue_depth; i++)
+ reply_q->reply_post_free[i].Words =
+ cpu_to_le64(ULLONG_MAX);
+ if (!_base_is_controller_msix_enabled(ioc))
+ goto skip_init_reply_post_free_queue;
+ reply_post_free += reply_post_free_sz;
+ }
}
skip_init_reply_post_free_queue:
@@ -4307,6 +4461,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
}
}
+ ioc->rdpq_array_enable_assigned = 0;
r = mpt2sas_base_map_resources(ioc);
if (r)
goto out_free_resources;
@@ -4667,6 +4822,16 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
r = -EFAULT;
goto out;
}
+
+ r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+ if (r)
+ goto out;
+
+ if (ioc->rdpq_array_enable && !ioc->rdpq_array_capable)
+ panic("%s: Issue occurred with flashing controller firmware."
+ "Please reboot the system and ensure that the correct"
+ "firmware version is running\n", ioc->name);
+
r = _base_make_ioc_operational(ioc, sleep_flag);
if (!r)
_base_reset_handler(ioc, MPT2_IOC_DONE_RESET);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 0a6747a..32181a6 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -636,6 +636,11 @@ struct mpt2sas_port_facts {
u16 MaxPostedCmdBuffers;
};
+struct reply_post_struct {
+ Mpi2ReplyDescriptorsUnion_t *reply_post_free;
+ dma_addr_t reply_post_free_dma;
+};
+
/**
* enum mutex_type - task management mutex type
* @TM_MUTEX_OFF: mutex is not required becuase calling function is acquiring it
@@ -779,8 +784,11 @@ typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc);
* @reply_free_dma_pool:
* @reply_free_host_index: tail index in pool to insert free replys
* @reply_post_queue_depth: reply post queue depth
- * @reply_post_free: pool for reply post (64bit descriptor)
- * @reply_post_free_dma:
+ * @reply_post_struct: struct for reply_post_free physical & virt address
+ * @rdpq_array_capable: FW supports multiple reply queue addresses in ioc_init
+ * @rdpq_array_enable: rdpq_array support is enabled in the driver
+ * @rdpq_array_enable_assigned: this ensures that rdpq_array_enable flag
+ * is assigned only ones
* @reply_queue_count: number of reply queue's
* @reply_queue_list: link list contaning the reply queue info
* @reply_post_host_index: head index in the pool where FW completes IO
@@ -973,11 +981,13 @@ struct MPT2SAS_ADAPTER {
/* reply post queue */
u16 reply_post_queue_depth;
- Mpi2ReplyDescriptorsUnion_t *reply_post_free;
- dma_addr_t reply_post_free_dma;
+ struct reply_post_struct *reply_post;
struct dma_pool *reply_post_free_dma_pool;
u8 reply_queue_count;
struct list_head reply_queue_list;
+ u8 rdpq_array_capable;
+ u8 rdpq_array_enable;
+ u8 rdpq_array_enable_assigned;
struct list_head delayed_tr_list;
struct list_head delayed_tr_volume_list;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
