Introduce mutual exclusion between the qla2xxx_remove_one PCI driver
callback and qla2x00_disable_board_on_pci_error, which is scheduled as
board_disable work by qla2x00_check_reg{32,16}_for_disconnect:
* Leave the driver-specific data attached to the underlying PCI device
intact in qla2x00_disable_board_on_pci_error, so that qla2x00_remove_one
has enough breadcrumbs to determine that any board_disable work has been
completed.
* In qla2xxx_remove_one, set a bit to prevent any subsequent
board_disable work from scheduling, then cancel and wait until pending
work has completed.
* Reuse the PCI device enable count check in qla2x00_remove_one to
determine if board_disable has occured. The original purpose of this
check was unnecessary since the driver remove function wasn't called
when the probe fails.
Signed-off-by: Joe Lawrence <joe.lawrence@xxxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_def.h | 1 +
drivers/scsi/qla2xxx/qla_isr.c | 3 ++-
drivers/scsi/qla2xxx/qla_os.c | 31 +++++++++++++++++++------------
3 files changed, 22 insertions(+), 13 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 1267b11..7c441c9 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -3404,6 +3404,7 @@ typedef struct scsi_qla_host {
unsigned long pci_flags;
#define PFLG_DISCONNECTED 0 /* PCI device removed */
+#define PFLG_DRIVER_REMOVING 1 /* PCI driver .remove */
uint32_t device_flags;
#define SWITCH_FOUND BIT_0
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 2741ad8..ee5eef4 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -117,7 +117,8 @@ qla2x00_check_reg32_for_disconnect(scsi_qla_host_t *vha, uint32_t reg)
{
/* Check for PCI disconnection */
if (reg == 0xffffffff) {
- if (!test_and_set_bit(PFLG_DISCONNECTED, &vha->pci_flags)) {
+ if (!test_and_set_bit(PFLG_DISCONNECTED, &vha->pci_flags) &&
+ !test_bit(PFLG_DRIVER_REMOVING, &vha->pci_flags)) {
/*
* Schedule this (only once) on the default system
* workqueue so that all the adapter workqueues and the
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 39c9953..51cba37 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -3123,15 +3123,25 @@ qla2x00_remove_one(struct pci_dev *pdev)
scsi_qla_host_t *base_vha;
struct qla_hw_data *ha;
+ base_vha = pci_get_drvdata(pdev);
+ ha = base_vha->hw;
+
+ /* Indicate device removal to prevent future board_disable and wait
+ * until any pending board_disable has completed. */
+ set_bit(PFLG_DRIVER_REMOVING, &base_vha->pci_flags);
+ cancel_work_sync(&ha->board_disable);
+
/*
- * If the PCI device is disabled that means that probe failed and any
- * resources should be have cleaned up on probe exit.
+ * If the PCI device is disabled then there was a PCI-disconnect and
+ * qla2x00_disable_board_on_pci_error has taken care of most of the
+ * resources.
*/
- if (!atomic_read(&pdev->enable_cnt))
+ if (!atomic_read(&pdev->enable_cnt)) {
+ scsi_host_put(base_vha->host);
+ kfree(ha);
+ pci_set_drvdata(pdev, NULL);
return;
-
- base_vha = pci_get_drvdata(pdev);
- ha = base_vha->hw;
+ }
qla2x00_wait_for_hba_ready(base_vha);
@@ -4791,18 +4801,15 @@ qla2x00_disable_board_on_pci_error(struct work_struct *work)
qla82xx_md_free(base_vha);
qla2x00_free_queues(ha);
- scsi_host_put(base_vha->host);
-
qla2x00_unmap_iobases(ha);
pci_release_selected_regions(ha->pdev, ha->bars);
- kfree(ha);
- ha = NULL;
-
pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
+ /*
+ * Let qla2x00_remove_one cleanup qla_hw_data on device removal.
+ */
}
/**************************************************************************
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
