There are various callers of qla2x00_check_reg{32,16}_for_disconnect
that may schedule board removal on PCI-disconnect. Test-and-set a
dedicated flag before scheduling board_disable so it is invoked only
once.
Signed-off-by: Joe Lawrence <joe.lawrence@xxxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_def.h | 3 +++
drivers/scsi/qla2xxx/qla_isr.c | 14 ++++++++------
2 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 1fa0104..1267b11 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -3402,6 +3402,9 @@ typedef struct scsi_qla_host {
#define FX00_CRITEMP_RECOVERY 25
#define FX00_HOST_INFO_RESEND 26
+ unsigned long pci_flags;
+#define PFLG_DISCONNECTED 0 /* PCI device removed */
+
uint32_t device_flags;
#define SWITCH_FOUND BIT_0
#define DFLG_NO_CABLE BIT_1
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index e1b16ad..2741ad8 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -117,12 +117,14 @@ qla2x00_check_reg32_for_disconnect(scsi_qla_host_t *vha, uint32_t reg)
{
/* Check for PCI disconnection */
if (reg == 0xffffffff) {
- /*
- * Schedule this on the default system workqueue so that all the
- * adapter workqueues and the DPC thread can be shutdown
- * cleanly.
- */
- schedule_work(&vha->hw->board_disable);
+ if (!test_and_set_bit(PFLG_DISCONNECTED, &vha->pci_flags)) {
+ /*
+ * Schedule this (only once) on the default system
+ * workqueue so that all the adapter workqueues and the
+ * DPC thread can be shutdown cleanly.
+ */
+ schedule_work(&vha->hw->board_disable);
+ }
return true;
} else
return false;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
