With all the required blk-mq work, and the previous set of scsi midlayer updates in Linus' tree this is the time for the first format scsi-mq submission. At this point the code is ready for merging and use by developers and early adopters. The core blk-mq code isn't that suitable for slow devices yet, mostly due to the lack of an I/O scheduler, but Jens is working on it. Similarly there is no dm-multipath support for drivers using blk-mq yet, but I'm working on it. It should also be noted that the code doesn't actually support multiple hardware queues or fine grained tuning of the blk-mq parameters yet. All these could be added fairly easily as soon as low-level drivers want to make use of them. The amount of chances to the existing code are fairly small, and mostly speedups or cleanups that also apply to the old path as well. Because of this I also haven't bothered to put it under a config option, just like the blk-mq core. The usage of blk-mq dramatically decreases CPU usage under all workloads going down from 100% CPU usage that the old setup can hit easily to usually less than 20% for maxing out storage subsystems with 512byte reads and writes, and it allows to easily archive millions of IOPS. Bart and Robert have helped with some very detailed measurements that they might be able to send in reply to this, although these usually involve significantly reworked low level drivers to avoid other bottle necks. One major objection to previous iterations of this code was the simple replacement of the host_lock with atomic counters for the host and busy counters. The host_lock avoidance on it's own already improves performance, and with the patch to avoid maintaining the per-target busy counter unless needed we now replace a lock round trip on the host_lock with just a single atomic increment in the submission path, and a single atomic decrement in completion path, which should provide benefits even for the oddest RISC architecture. Longer term I'd still love to get rid of these entirely and use the counters in blk-mq, but due to the difference in how they are maintained this doesn't seem feasible as long as we still need to support the legacy request code path. In addition to the patches in this thread there also is a git available at: git://git.infradead.org/users/hch/scsi.git scsi-mq This work was sponsored by the ION division of Fusion IO. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
