In various areas of the code, it is assumed that
se_cmd->data_length describes pure data. In case
that protection information exists over the wire
(protect bits is are on) the target core decrease
the protection length from the data length (instead
of each transport peeking in the cdb).
Modify loopback device to include protection information
in the transferred data length (like other scsi transports).
Signed-off-by: Sagi Grimberg <sagig@xxxxxxxxxxxx>
---
drivers/target/loopback/tcm_loop.c | 15 ++++++++++++---
drivers/target/target_core_sbc.c | 15 +++++++++++++--
2 files changed, 25 insertions(+), 5 deletions(-)
diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c
index c886ad1..1f4c015 100644
--- a/drivers/target/loopback/tcm_loop.c
+++ b/drivers/target/loopback/tcm_loop.c
@@ -179,7 +179,7 @@ static void tcm_loop_submission_work(struct work_struct *work)
struct tcm_loop_hba *tl_hba;
struct tcm_loop_tpg *tl_tpg;
struct scatterlist *sgl_bidi = NULL;
- u32 sgl_bidi_count = 0;
+ u32 sgl_bidi_count = 0, transfer_length;
int rc;
tl_hba = *(struct tcm_loop_hba **)shost_priv(sc->device->host);
@@ -213,12 +213,21 @@ static void tcm_loop_submission_work(struct work_struct *work)
}
- if (!scsi_prot_sg_count(sc) && scsi_get_prot_op(sc) != SCSI_PROT_NORMAL)
+ transfer_length = scsi_transfer_length(sc);
+ if (!scsi_prot_sg_count(sc) &&
+ scsi_get_prot_op(sc) != SCSI_PROT_NORMAL) {
se_cmd->prot_pto = true;
+ /*
+ * loopback transport doesn't support
+ * WRITE_GENERATE, READ_STRIP protection
+ * information operations, go ahead unprotected.
+ */
+ transfer_length = scsi_bufflen(sc);
+ }
rc = target_submit_cmd_map_sgls(se_cmd, tl_nexus->se_sess, sc->cmnd,
&tl_cmd->tl_sense_buf[0], tl_cmd->sc->device->lun,
- scsi_bufflen(sc), tcm_loop_sam_attr(sc),
+ transfer_length, tcm_loop_sam_attr(sc),
sc->sc_data_direction, 0,
scsi_sglist(sc), scsi_sg_count(sc),
sgl_bidi, sgl_bidi_count,
diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index e022959..06f8ecd 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -665,8 +665,19 @@ sbc_check_prot(struct se_device *dev, struct se_cmd *cmd, unsigned char *cdb,
cmd->prot_type = dev->dev_attrib.pi_prot_type;
cmd->prot_length = dev->prot_length * sectors;
- pr_debug("%s: prot_type=%d, prot_length=%d prot_op=%d prot_checks=%d\n",
- __func__, cmd->prot_type, cmd->prot_length,
+
+ /**
+ * In case protection information exists over the wire
+ * we modify command data length to describe pure data.
+ * The actual transfer length is data length + protection
+ * length
+ **/
+ if (protect)
+ cmd->data_length -= cmd->prot_length;
+
+ pr_debug("%s: prot_type=%d, data_length=%d, prot_length=%d "
+ "prot_op=%d prot_checks=%d\n",
+ __func__, cmd->prot_type, cmd->data_length, cmd->prot_length,
cmd->prot_op, cmd->prot_checks);
return true;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
