Error handling in UFS driver is broken and resets the host controller
for fatal errors without re-initialization. Correct the fatal error
handling sequence according to UFS Host Controller Interface (HCI)
v1.1 specification.
o Processed requests which are completed w/wo error are reported to
SCSI layer and any pending commands that are not started are aborted
in the controller and re-queued into scsi mid-layer queue.
o Upon determining fatal error condition the host controller may hang
forever until a reset is applied. Block SCSI layer for sending new
requests and apply reset in a separate error handling work.
o SCSI is informed about the expected Unit-Attention exception from the
device for the immediate command after a reset so that the SCSI layer
take necessary steps to establish communication with the device.
Signed-off-by: Sujit Reddy Thumma <sthumma@xxxxxxxxxxxxxx>
Reviewed-by: Yaniv Gardi <ygardi@xxxxxxxxxxxxxx>
Tested-by: Dolev Raviv <draviv@xxxxxxxxxxxxxx>
Acked-by: Vinayak Holikatti <vinholikatti@xxxxxxxxx>
---
drivers/scsi/ufs/ufshcd.c | 229 ++++++++++++++++++++++++++++------------------
drivers/scsi/ufs/ufshcd.h | 10 +-
2 files changed, 149 insertions(+), 90 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 5462310..0c28772 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -84,6 +84,14 @@ enum {
UFSHCD_EH_IN_PROGRESS = (1 << 0),
};
+/* UFSHCD UIC layer error flags */
+enum {
+ UFSHCD_UIC_DL_PA_INIT_ERROR = (1 << 0), /* Data link layer error */
+ UFSHCD_UIC_NL_ERROR = (1 << 1), /* Network layer error */
+ UFSHCD_UIC_TL_ERROR = (1 << 2), /* Transport Layer error */
+ UFSHCD_UIC_DME_ERROR = (1 << 3), /* DME error */
+};
+
/* Interrupt configuration options */
enum {
UFSHCD_INT_DISABLE,
@@ -100,6 +108,8 @@ enum {
static void ufshcd_tmc_handler(struct ufs_hba *hba);
static void ufshcd_async_scan(void *data, async_cookie_t cookie);
+static int ufshcd_reset_and_restore(struct ufs_hba *hba);
+static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag);
/*
* ufshcd_wait_for_register - wait for register value to change
@@ -1735,9 +1745,6 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba)
goto out;
}
- if (hba->ufshcd_state == UFSHCD_STATE_RESET)
- scsi_unblock_requests(hba->host);
-
out:
return err;
}
@@ -1863,66 +1870,6 @@ static int ufshcd_verify_dev_init(struct ufs_hba *hba)
}
/**
- * ufshcd_do_reset - reset the host controller
- * @hba: per adapter instance
- *
- * Returns SUCCESS/FAILED
- */
-static int ufshcd_do_reset(struct ufs_hba *hba)
-{
- struct ufshcd_lrb *lrbp;
- unsigned long flags;
- int tag;
-
- /* block commands from midlayer */
- scsi_block_requests(hba->host);
-
- spin_lock_irqsave(hba->host->host_lock, flags);
- hba->ufshcd_state = UFSHCD_STATE_RESET;
-
- /* send controller to reset state */
- ufshcd_hba_stop(hba);
- spin_unlock_irqrestore(hba->host->host_lock, flags);
-
- /* abort outstanding commands */
- for (tag = 0; tag < hba->nutrs; tag++) {
- if (test_bit(tag, &hba->outstanding_reqs)) {
- lrbp = &hba->lrb[tag];
- if (lrbp->cmd) {
- scsi_dma_unmap(lrbp->cmd);
- lrbp->cmd->result = DID_RESET << 16;
- lrbp->cmd->scsi_done(lrbp->cmd);
- lrbp->cmd = NULL;
- clear_bit_unlock(tag, &hba->lrb_in_use);
- }
- }
- }
-
- /* complete device management command */
- if (hba->dev_cmd.complete)
- complete(hba->dev_cmd.complete);
-
- /* clear outstanding request/task bit maps */
- hba->outstanding_reqs = 0;
- hba->outstanding_tasks = 0;
-
- /* Host controller enable */
- if (ufshcd_hba_enable(hba)) {
- dev_err(hba->dev,
- "Reset: Controller initialization failed\n");
- return FAILED;
- }
-
- if (ufshcd_link_startup(hba)) {
- dev_err(hba->dev,
- "Reset: Link start-up failed\n");
- return FAILED;
- }
-
- return SUCCESS;
-}
-
-/**
* ufshcd_slave_alloc - handle initial SCSI device configurations
* @sdev: pointer to SCSI device
*
@@ -1939,6 +1886,9 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev)
sdev->use_10_for_ms = 1;
scsi_set_tag_type(sdev, MSG_SIMPLE_TAG);
+ /* allow SCSI layer to restart the device in case of errors */
+ sdev->allow_restart = 1;
+
/*
* Inform SCSI Midlayer that the LUN queue depth is same as the
* controller queue depth. If a LUN queue depth is less than the
@@ -2134,6 +2084,9 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
case OCS_ABORTED:
result |= DID_ABORT << 16;
break;
+ case OCS_INVALID_COMMAND_STATUS:
+ result |= DID_REQUEUE << 16;
+ break;
case OCS_INVALID_CMD_TABLE_ATTR:
case OCS_INVALID_PRDT_ATTR:
case OCS_MISMATCH_DATA_BUF_SIZE:
@@ -2451,45 +2404,145 @@ out:
}
/**
- * ufshcd_fatal_err_handler - handle fatal errors
- * @hba: per adapter instance
+ * ufshcd_err_handler - handle UFS errors that require s/w attention
+ * @work: pointer to work structure
*/
-static void ufshcd_fatal_err_handler(struct work_struct *work)
+static void ufshcd_err_handler(struct work_struct *work)
{
struct ufs_hba *hba;
- hba = container_of(work, struct ufs_hba, feh_workq);
+ unsigned long flags;
+ u32 err_xfer = 0;
+ u32 err_tm = 0;
+ int err = 0;
+ int tag;
+
+ hba = container_of(work, struct ufs_hba, eh_work);
pm_runtime_get_sync(hba->dev);
- /* check if reset is already in progress */
- if (hba->ufshcd_state != UFSHCD_STATE_RESET)
- ufshcd_do_reset(hba);
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ if (hba->ufshcd_state == UFSHCD_STATE_RESET) {
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ goto out;
+ }
+
+ hba->ufshcd_state = UFSHCD_STATE_RESET;
+ ufshcd_set_eh_in_progress(hba);
+
+ /* Complete requests that have door-bell cleared by h/w */
+ ufshcd_transfer_req_compl(hba);
+ ufshcd_tmc_handler(hba);
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+ /* Clear pending transfer requests */
+ for_each_set_bit(tag, &hba->outstanding_reqs, hba->nutrs)
+ if (ufshcd_clear_cmd(hba, tag))
+ err_xfer |= 1 << tag;
+
+ /* Clear pending task management requests */
+ for_each_set_bit(tag, &hba->outstanding_tasks, hba->nutmrs)
+ if (ufshcd_clear_tm_cmd(hba, tag))
+ err_tm |= 1 << tag;
+
+ /* Complete the requests that are cleared by s/w */
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ ufshcd_transfer_req_compl(hba);
+ ufshcd_tmc_handler(hba);
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+ /* Fatal errors need reset */
+ if (err_xfer || err_tm || (hba->saved_err & INT_FATAL_ERRORS) ||
+ ((hba->saved_err & UIC_ERROR) &&
+ (hba->saved_uic_err & UFSHCD_UIC_DL_PA_INIT_ERROR))) {
+ err = ufshcd_reset_and_restore(hba);
+ if (err) {
+ dev_err(hba->dev, "%s: reset and restore failed\n",
+ __func__);
+ hba->ufshcd_state = UFSHCD_STATE_ERROR;
+ }
+ /*
+ * Inform scsi mid-layer that we did reset and allow to handle
+ * Unit Attention properly.
+ */
+ scsi_report_bus_reset(hba->host, 0);
+ hba->saved_err = 0;
+ hba->saved_uic_err = 0;
+ }
+ ufshcd_clear_eh_in_progress(hba);
+
+out:
+ scsi_unblock_requests(hba->host);
pm_runtime_put_sync(hba->dev);
}
/**
- * ufshcd_err_handler - Check for fatal errors
- * @work: pointer to a work queue structure
+ * ufshcd_update_uic_error - check and set fatal UIC error flags.
+ * @hba: per-adapter instance
*/
-static void ufshcd_err_handler(struct ufs_hba *hba)
+static void ufshcd_update_uic_error(struct ufs_hba *hba)
{
u32 reg;
+ /* PA_INIT_ERROR is fatal and needs UIC reset */
+ reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_DATA_LINK_LAYER);
+ if (reg & UIC_DATA_LINK_LAYER_ERROR_PA_INIT)
+ hba->uic_error |= UFSHCD_UIC_DL_PA_INIT_ERROR;
+
+ /* UIC NL/TL/DME errors needs software retry */
+ reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_NETWORK_LAYER);
+ if (reg)
+ hba->uic_error |= UFSHCD_UIC_NL_ERROR;
+
+ reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_TRANSPORT_LAYER);
+ if (reg)
+ hba->uic_error |= UFSHCD_UIC_TL_ERROR;
+
+ reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_DME);
+ if (reg)
+ hba->uic_error |= UFSHCD_UIC_DME_ERROR;
+
+ dev_dbg(hba->dev, "%s: UIC error flags = 0x%08x\n",
+ __func__, hba->uic_error);
+}
+
+/**
+ * ufshcd_check_errors - Check for errors that need s/w attention
+ * @hba: per-adapter instance
+ */
+static void ufshcd_check_errors(struct ufs_hba *hba)
+{
+ bool queue_eh_work = false;
+
if (hba->errors & INT_FATAL_ERRORS)
- goto fatal_eh;
+ queue_eh_work = true;
if (hba->errors & UIC_ERROR) {
- reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_DATA_LINK_LAYER);
- if (reg & UIC_DATA_LINK_LAYER_ERROR_PA_INIT)
- goto fatal_eh;
+ hba->uic_error = 0;
+ ufshcd_update_uic_error(hba);
+ if (hba->uic_error)
+ queue_eh_work = true;
}
- return;
-fatal_eh:
- /* handle fatal errors only when link is functional */
- if (hba->ufshcd_state == UFSHCD_STATE_OPERATIONAL) {
- /* block commands at driver layer until error is handled */
- hba->ufshcd_state = UFSHCD_STATE_ERROR;
- schedule_work(&hba->feh_workq);
+
+ if (queue_eh_work) {
+ /* handle fatal errors only when link is functional */
+ if (hba->ufshcd_state == UFSHCD_STATE_OPERATIONAL) {
+ /* block commands from scsi mid-layer */
+ scsi_block_requests(hba->host);
+
+ /* transfer error masks to sticky bits */
+ hba->saved_err |= hba->errors;
+ hba->saved_uic_err |= hba->uic_error;
+
+ hba->ufshcd_state = UFSHCD_STATE_ERROR;
+ schedule_work(&hba->eh_work);
+ }
}
+ /*
+ * if (!queue_eh_work) -
+ * Other errors are either non-fatal where host recovers
+ * itself without s/w intervention or errors that will be
+ * handled by the SCSI core layer.
+ */
}
/**
@@ -2514,7 +2567,7 @@ static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
{
hba->errors = UFSHCD_ERROR_MASK & intr_status;
if (hba->errors)
- ufshcd_err_handler(hba);
+ ufshcd_check_errors(hba);
if (intr_status & UFSHCD_UIC_MASK)
ufshcd_uic_cmd_compl(hba, intr_status);
@@ -2889,12 +2942,12 @@ static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd)
*/
do {
spin_lock_irqsave(hba->host->host_lock, flags);
- if (!(work_pending(&hba->feh_workq) ||
+ if (!(work_pending(&hba->eh_work) ||
hba->ufshcd_state == UFSHCD_STATE_RESET))
break;
spin_unlock_irqrestore(hba->host->host_lock, flags);
dev_dbg(hba->dev, "%s: reset in progress\n", __func__);
- flush_work(&hba->feh_workq);
+ flush_work(&hba->eh_work);
} while (1);
hba->ufshcd_state = UFSHCD_STATE_RESET;
@@ -3130,7 +3183,7 @@ int ufshcd_init(struct device *dev, struct ufs_hba **hba_handle,
init_waitqueue_head(&hba->tm_tag_wq);
/* Initialize work queues */
- INIT_WORK(&hba->feh_workq, ufshcd_fatal_err_handler);
+ INIT_WORK(&hba->eh_work, ufshcd_err_handler);
INIT_WORK(&hba->eeh_work, ufshcd_exception_event_handler);
/* Initialize UIC command mutex */
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 48c7d9b..acf318e 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -183,9 +183,12 @@ struct ufs_dev_cmd {
* @eh_flags: Error handling flags
* @intr_mask: Interrupt Mask Bits
* @ee_ctrl_mask: Exception event control mask
- * @feh_workq: Work queue for fatal controller error handling
+ * @eh_work: Worker to handle UFS errors that require s/w attention
* @eeh_work: Worker to handle exception events
* @errors: HBA errors
+ * @uic_error: UFS interconnect layer error status
+ * @saved_err: sticky error mask
+ * @saved_uic_err: sticky UIC error mask
* @dev_cmd: ufs device management command information
* @auto_bkops_enabled: to track whether bkops is enabled in device
*/
@@ -233,11 +236,14 @@ struct ufs_hba {
u16 ee_ctrl_mask;
/* Work Queues */
- struct work_struct feh_workq;
+ struct work_struct eh_work;
struct work_struct eeh_work;
/* HBA Errors */
u32 errors;
+ u32 uic_error;
+ u32 saved_err;
+ u32 saved_uic_err;
/* Device management request data */
struct ufs_dev_cmd dev_cmd;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
