Re: [PATCH v1.1 2/16 update 2] arcmsr: Adding code to support MSI-X interrupt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 06, 2014 at 02:54:45PM +0200, Tomas Henzl wrote:
> On 05/06/2014 10:17 AM, ching wrote:
> > From: Ching<ching2048@xxxxxxxxxxxx>
> >
> > Adding code to support MSI-X interrupt.
> >
> > This update has modification by Tomas' suggestion.
> > And I add a msix_vector_count for free_irq.
> >
> > Signed-off-by: Ching<ching2048@xxxxxxxxxxxx>
> > ---
> >
> > diff -uprN a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
> > --- a/drivers/scsi/arcmsr/arcmsr.h	2014-04-28 16:02:46.000000000 +0800
> > +++ b/drivers/scsi/arcmsr/arcmsr.h	2014-05-06 15:24:36.000000000 +0800
> > @@ -64,6 +64,7 @@ struct device_attribute;
> >  #define ARCMSR_MAX_HBB_POSTQUEUE						264
> >  #define ARCMSR_MAX_XFER_LEN							0x26000 /* 152K */
> >  #define ARCMSR_CDB_SG_PAGE_LENGTH						256 
> > +#define ARCMST_NUM_MSIX_VECTORS		4
> >  #ifndef PCI_DEVICE_ID_ARECA_1880
> >  #define PCI_DEVICE_ID_ARECA_1880 0x1880
> >   #endif
> > @@ -508,6 +509,7 @@ struct AdapterControlBlock
> >  	struct pci_dev *		pdev;
> >  	struct Scsi_Host *		host;
> >  	unsigned long			vir2phy_offset;
> > +	struct msix_entry	entries[ARCMST_NUM_MSIX_VECTORS];
> >  	/* Offset is used in making arc cdb physical to virtual calculations */
> >  	uint32_t			outbound_int_enable;
> >  	uint32_t			cdb_phyaddr_hi32;
> > @@ -544,6 +546,8 @@ struct AdapterControlBlock
> >  	/* iop init */
> >  	#define ACB_F_ABORT				0x0200
> >  	#define ACB_F_FIRMWARE_TRAP           		0x0400
> > +	#define ACB_F_MSI_ENABLED		0x1000
> > +	#define ACB_F_MSIX_ENABLED		0x2000
> >  	struct CommandControlBlock *			pccb_pool[ARCMSR_MAX_FREECCB_NUM];
> >  	/* used for memory free */
> >  	struct list_head		ccb_free_list;
> > @@ -594,6 +598,7 @@ struct AdapterControlBlock
> >  				#define	FW_DEADLOCK	0x0010
> >  	atomic_t 			rq_map_token;
> >  	atomic_t			ante_token_value;
> > +	int		msix_vector_count;
> >  };/* HW_DEVICE_EXTENSION */
> >  /*
> >  *******************************************************************************
> > diff -uprN a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
> > --- a/drivers/scsi/arcmsr/arcmsr_hba.c	2014-04-28 15:58:34.000000000 +0800
> > +++ b/drivers/scsi/arcmsr/arcmsr_hba.c	2014-05-06 15:20:48.000000000 +0800
> > @@ -603,6 +603,65 @@ static void arcmsr_message_isr_bh_fn(str
> >  	}
> >  }
> >  
> > +static int
> > +arcmsr_request_irq(struct pci_dev *pdev, struct AdapterControlBlock *acb)
> > +{
> > +	int	i, j, r;
> > +	struct msix_entry entries[ARCMST_NUM_MSIX_VECTORS];
> > +
> > +	if (!pci_find_capability(pdev, PCI_CAP_ID_MSIX))
> > +		goto msi_int;
> > +	for (i = 0; i < ARCMST_NUM_MSIX_VECTORS; i++)
> > +		entries[i].entry = i;
> > +	r = pci_enable_msix(pdev, entries, ARCMST_NUM_MSIX_VECTORS);
> 
> The use of pci_enable_msix is deprecated, please use pci_enable_msix_range or
> pci_enable_msix_exact instead. Sorry for not noticing the first time I reviewed
> this patch.
> 
> > +	if (r < 0)
> > +		goto msi_int;
> > +	if (r) {
> > +		if (pci_enable_msix(pdev, entries, r))
> > +			goto msi_int;
> > +	} else
> > +		r = ARCMST_NUM_MSIX_VECTORS;
> > +	acb->msix_vector_count = r;
> > +	for (i = 0; i < r; i++) {
> > +		if (request_irq(entries[i].vector,
> > +			arcmsr_do_interrupt, 0, "arcmsr", acb)) {
> > +			pr_warn("arcmsr%d: request_irq =%d failed!\n",
> > +				acb->host->host_no, pdev->irq);
> > +			for (j = 0 ; j < i ; j++)
> > +				free_irq(entries[j].vector, acb);
> > +			pci_disable_msix(pdev);
> > +			goto msi_int;
> > +		}
> > +		acb->entries[i] = entries[i];
> > +	}
> > +	acb->acb_flags |= ACB_F_MSIX_ENABLED;
> > +	pr_info("arcmsr%d: msi-x enabled\n", acb->host->host_no);
> > +	return ARC_SUCCESS;
> > +msi_int:
> > +	if (!pci_find_capability(pdev, PCI_CAP_ID_MSI))
> > +		goto legacy_int;
> > +	if (pci_enable_msi(pdev))
> 
> Similarly here, use the new pci_enable_msi_range() or pci_enable_msi_exact()

Nope, pci_enable_msi() is not going to deprecate and could be used here.

> > +		goto legacy_int;
> > +	if (request_irq(pdev->irq, arcmsr_do_interrupt,
> > +		IRQF_SHARED, "arcmsr", acb)) {
> > +		pr_warn("arcmsr%d: request_irq =%d failed!\n",
> > +			acb->host->host_no, pdev->irq);
> > +		pci_disable_msi(pdev);
> > +		goto legacy_int;
> > +	}
> > +	acb->acb_flags |= ACB_F_MSI_ENABLED;
> > +	pr_info("arcmsr%d: msi enabled\n", acb->host->host_no);
> > +	return ARC_SUCCESS;
> > +legacy_int:
> > +	if (request_irq(pdev->irq, arcmsr_do_interrupt,
> > +		IRQF_SHARED, "arcmsr", acb)) {
> > +		pr_warn("arcmsr%d: request_irq = %d failed!\n",
> > +			acb->host->host_no, pdev->irq);
> > +		return ARC_FAILURE;
> > +	}
> > +	return ARC_SUCCESS;
> > +}
> > +
> >  static int arcmsr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> >  {
> >  	struct Scsi_Host *host;
> > @@ -667,16 +726,13 @@ static int arcmsr_probe(struct pci_dev *
> >  	if(error){
> >  		goto free_hbb_mu;
> >  	}
> > -	arcmsr_iop_init(acb);
> >  	error = scsi_add_host(host, &pdev->dev);
> >  	if(error){
> >  		goto RAID_controller_stop;
> >  	}
> > -	error = request_irq(pdev->irq, arcmsr_do_interrupt, IRQF_SHARED, "arcmsr", acb);
> > -	if(error){
> > +	if (arcmsr_request_irq(pdev, acb) == ARC_FAILURE)
> >  		goto scsi_host_remove;
> > -	}
> > -	host->irq = pdev->irq;
> > +	arcmsr_iop_init(acb);
> >      	scsi_scan_host(host);
> >  	INIT_WORK(&acb->arcmsr_do_message_isr_bh, arcmsr_message_isr_bh_fn);
> >  	atomic_set(&acb->rq_map_token, 16);
> > @@ -992,6 +1048,22 @@ static void arcmsr_done4abort_postqueue(
> >  	}
> >  	}
> >  }
> > +
> > +static void arcmsr_free_irq(struct pci_dev *pdev, struct AdapterControlBlock *acb)
> > +{
> > +	int i;
> > +
> > +	if (acb->acb_flags & ACB_F_MSI_ENABLED) {
> > +		free_irq(pdev->irq, acb);
> > +		pci_disable_msi(pdev);
> > +	} else if (acb->acb_flags & ACB_F_MSIX_ENABLED) {
> > +		for (i = 0; i < acb->msix_vector_count; i++)
> > +			free_irq(acb->entries[i].vector, acb);
> > +		pci_disable_msix(pdev);
> > +	} else
> > +		free_irq(pdev->irq, acb);
> > +}
> > +
> >  static void arcmsr_remove(struct pci_dev *pdev)
> >  {
> >  	struct Scsi_Host *host = pci_get_drvdata(pdev);
> > @@ -1029,7 +1101,7 @@ static void arcmsr_remove(struct pci_dev
> >  			}
> >  		}
> >  	}
> > -	free_irq(pdev->irq, acb);
> > +	arcmsr_free_irq(pdev, acb);
> >  	arcmsr_free_ccb_pool(acb);
> >  	arcmsr_free_hbb_mu(acb);
> >  	arcmsr_unmap_pciregion(acb);
> > @@ -1045,6 +1117,7 @@ static void arcmsr_shutdown(struct pci_d
> >  		(struct AdapterControlBlock *)host->hostdata;
> >  	del_timer_sync(&acb->eternal_timer);
> >  	arcmsr_disable_outbound_ints(acb);
> > +	arcmsr_free_irq(pdev, acb);
> >  	flush_work(&acb->arcmsr_do_message_isr_bh);
> >  	arcmsr_stop_adapter_bgrb(acb);
> >  	arcmsr_flush_adapter_cache(acb);
> > @@ -2516,8 +2589,6 @@ static int arcmsr_iop_confirm(struct Ada
> >  	case ACB_ADAPTER_TYPE_A: {
> >  		if (cdb_phyaddr_hi32 != 0) {
> >  			struct MessageUnit_A __iomem *reg = acb->pmuA;
> > -			uint32_t intmask_org;
> > -			intmask_org = arcmsr_disable_outbound_ints(acb);
> >  			writel(ARCMSR_SIGNATURE_SET_CONFIG, \
> >  						&reg->message_rwbuffer[0]);
> >  			writel(cdb_phyaddr_hi32, &reg->message_rwbuffer[1]);
> > @@ -2529,7 +2600,6 @@ static int arcmsr_iop_confirm(struct Ada
> >  				acb->host->host_no);
> >  				return 1;
> >  			}
> > -			arcmsr_enable_outbound_ints(acb, intmask_org);
> >  		}
> >  		}
> >  		break;
> > @@ -2539,8 +2609,6 @@ static int arcmsr_iop_confirm(struct Ada
> >  		uint32_t __iomem *rwbuffer;
> >  
> >  		struct MessageUnit_B *reg = acb->pmuB;
> > -		uint32_t intmask_org;
> > -		intmask_org = arcmsr_disable_outbound_ints(acb);
> >  		reg->postq_index = 0;
> >  		reg->doneq_index = 0;
> >  		writel(ARCMSR_MESSAGE_SET_POST_WINDOW, reg->drv2iop_doorbell);
> > @@ -2569,7 +2637,6 @@ static int arcmsr_iop_confirm(struct Ada
> >  			return 1;
> >  		}
> >  		arcmsr_hbb_enable_driver_mode(acb);
> > -		arcmsr_enable_outbound_ints(acb, intmask_org);
> >  		}
> >  		break;
> >  	case ACB_ADAPTER_TYPE_C: {
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 
Regards,
Alexander Gordeev
agordeev@xxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux