> Ben Hutchings already submitted a patch for this twice, which I cc'd you > on: > > http://marc.info/?t=139277203900003 > > will you ack it? PCI_VDEVICE() is a sort of take it or leave it macro. > It's not important and it will look untidy and a bit confusing having a > mix of open coding and macros, so I'd say convert all or none. > Using open coding because PCI_VENDOR_ID_MARVELL_EXT was undefined before. Now, we should use the macros instead of open coding. > > > > > Add support for the AOC-SAS2LP-MV8 SAS-2 controller from SuperMicro. > > > This controller has subdevice id 0x9485 instead of 0x9480, and apparently > > > this simple patch is the only thing needed to make it work. > > > > > > # lspci -vn > > > [...] > > > 03:00.0 0104: 1b4b:9485 (rev 03) > > > Subsystem: 1b4b:9485 > > > Flags: bus master, fast devsel, latency 0, IRQ 24 > > > Memory at feba0000 (64-bit, non-prefetchable) [size=128K] > > > Memory at febc0000 (64-bit, non-prefetchable) [size=256K] > > > Expansion ROM at feb90000 [disabled] [size=64K] > > > Capabilities: [40] Power Management version 3 > > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > > > Capabilities: [70] Express Endpoint, MSI 00 > > > Capabilities: [100] Advanced Error Reporting > > > Capabilities: [140] Virtual Channel > > > Kernel driver in use: mvsas > > > Kernel modules: mvsas > > > > > > Signed-off-by: Jan Kasprzak <kas@xxxxxxxxxx> > > > > > > diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c > > > index 5ff978b..eacee48 100644 > > > --- a/drivers/scsi/mvsas/mv_init.c > > > +++ b/drivers/scsi/mvsas/mv_init.c > > > @@ -728,6 +728,15 @@ static struct pci_device_id mvs_pci_table[] = { > > > .class_mask = 0, > > > .driver_data = chip_9485, > > > }, > > > + { > > > + .vendor = PCI_VENDOR_ID_MARVELL_EXT, > > > + .device = 0x9485, > > > + .subvendor = PCI_ANY_ID, > > > + .subdevice = 0x9485, > > > + .class = 0, > > > + .class_mask = 0, > > > + .driver_data = chip_9485, > > > + }, > > > { PCI_VDEVICE(OCZ, 0x1021), chip_9485}, /* OCZ RevoDrive3 */ > > > { PCI_VDEVICE(OCZ, 0x1022), chip_9485}, /* OCZ RevoDrive3/zDriveR4 > (exact > > > model unknown) */ > > > { PCI_VDEVICE(OCZ, 0x1040), chip_9485}, /* OCZ RevoDrive3/zDriveR4 > (exact > > > model unknown) */ > > > > > > -- > > > | Jan "Yenya" Kasprzak <kas at {fi.muni.cz - work | yenya.net - private}> > | > > > | New GPG 4096R/A45477D5 - see http://www.fi.muni.cz/~kas/pgp-rollover.txt > | > > > | http://www.fi.muni.cz/~kas/ Journal: > http://www.fi.muni.cz/~kas/blog/ > > > | > > > There's clearly a balance between "octopus merges are fine" and "Christ, > > > that's not an octopus, that's a Cthulhu merge". --Linus Torvalds > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
